Make use of external Identity Management for BaseX

On Thu, Apr 29, 2021 at 3:54 PM Rob <private at tjalma.com> wrote: > > Hi, > > I have a question. > Can BaseX make use of an Identity Management application like Keycloak for Users? > > I can’t find anything about it :) > > With kind regards, > Rob Tjalma

On 30/04/21 08:47, Christian Grün wrote: > Hi Rob, > > There is no prepackaged module for Keycloak (at least I’m aware of > none), but you can write your own code with XQuery. See [1] for an > example how this might look like. > > Are you using RESTXQ? > > Best, > Christian > > [1] https://code-repo.d4science.org/gCubeSystem/d4science-keycloak-themes/src/branch/master/src/utils/xquery > > > > On Thu, Apr 29, 2021 at 3:54 PM Rob <private at tjalma.com> wrote: >> Hi, >> >> I have a question. >> Can BaseX make use of an Identity Management application like Keycloak for Users? >> >> I can’t find anything about it :) >> >> With kind regards, >> Rob Tjalma

>>We have also a RestXQ module that in combination with basex:perm

On Fri, Apr 30, 2021 at 6:00 PM <basex-talk-request at mailman.uni-konstanz.de> wrote: > Send BaseX-Talk mailing list submissions to > basex-talk at mailman.uni-konstanz.de > > To subscribe or unsubscribe via the World Wide Web, visit > https://mailman.uni-konstanz.de/mailman/listinfo/basex-talk > or, via email, send a message with subject or body 'help' to > basex-talk-request at mailman.uni-konstanz.de > > You can reach the person managing the list at > basex-talk-owner at mailman.uni-konstanz.de > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of BaseX-Talk digest..." > > > Today's Topics: > > 1. Make use of external Identity Management for BaseX (Rob) > 2. Re: Reloading jars on a running http server. (Reece Dunn) > 3. Getting profile information in server responses. (Reece Dunn) > 4. Re: Make use of external Identity Management for BaseX > (Christian Gr?n) > 5. Re: Reloading jars on a running http server. (Christian Gr?n) > 6. Re: Getting profile information in server responses. > (Christian Gr?n) > 7. Re: Reloading jars on a running http server. (Reece Dunn) > 8. Re: Reloading jars on a running http server. (Christian Gr?n) > 9. Re: Make use of external Identity Management for BaseX > (Marco Lettere) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Thu, 29 Apr 2021 15:54:08 +0200 > From: Rob <private at tjalma.com> > To: BaseX <basex-talk at mailman.uni-konstanz.de> > Subject: [basex-talk] Make use of external Identity Management for > BaseX > Message-ID: <39036EF3-E67D-470D-B2F4-E6FBFFDF40E6 at tjalma.com> > Content-Type: text/plain; charset=utf-8 > > Hi, > > I have a question. > Can BaseX make use of an Identity Management application like Keycloak for > Users? > > I can?t find anything about it :) > > With kind regards, > Rob Tjalma > > ------------------------------ > > Message: 2 > Date: Thu, 29 Apr 2021 20:48:09 +0100 > From: Reece Dunn <msclrhd at googlemail.com> > To: Christian Gr?n <christian.gruen at gmail.com> > Cc: BaseX <basex-talk at mailman.uni-konstanz.de> > Subject: Re: [basex-talk] Reloading jars on a running http server. > Message-ID: > <CAGdtn24Qdgbe3= > nebYA1je4hCrZVAgi_sercCRxsTxmZcWcAxQ at mail.gmail.com> > Content-Type: text/plain; charset="utf-8" > > Hi Christian, > > Thanks for the response. Unfortunately, I've not been able to get the > reloading working. > > Kind regards, > Reece > > On Wed, 21 Apr 2021 at 18:49, Christian Gr?n <christian.gruen at gmail.com> > wrote: > > > Hi Reece, > > > > If you install your Java code as JAR file in the repository [1], the > > code will be loaded and unloaded every time when your query is > > executed. If you get an error message? > > > > java.lang.reflect.InaccessibleObjectException: Unable to make field > > private final jdk.internal.loader.URLClassPath > > java.net.URLClassLoader.ucp accessible: module java.base does not > > "opens java.net" to unnamed module @79e2c065 > > > > ?unloading fails [2], as you?re probably using a more recent version > > of the JDK, which restricts reflective access to internal variables. > > You can get around this by adding Java flags at startup time: > > > > --add-opens java.base/java.net=ALL-UNNAMED > > --add-opens java.base/jdk.internal.loader=ALL-UNNAMED > > > > Maybe there are better solutions to unload JAR files today. > > Suggestions are welcome! > > > > Hope this helps, > > Christian > > > > [1] https://docs.basex.org/wiki/Repository#Java > > [2] > > > https://github.com/BaseXdb/basex/blob/master/basex-core/src/main/java/org/basex/util/JarLoader.java#L34 > > > > > > > > On Tue, Apr 20, 2021 at 6:44 PM Reece Dunn <msclrhd at googlemail.com> > wrote: > > > > > > Hi all, > > > > > > I'm working on a Java class that I'm importing into an XQuery, so I can > > do additional processing on the data that isn't easily expressible in > > XQuery (or XSLT). In order to get BaseX to pick up a modified version of > > the jar file I'm building, I'm restarting the BaseX http server. > > > > > > This makes it slower to turn around testing the changes. Is there a > > better way of doing this? > > > > > > Kind regards, > > > Reece > > >

> Op 1 mei 2021, om 05:29 heeft Adam Law <adamjameslaw at gmail.com> het volgende geschreven: > > If Rob isn't interested, I certain am... Yes please share > > > >>We have also a RestXQ module that in combination with basex:perm > > annotations protects access to a GUI implementing the Oauth2 Code-grant > > flow. If Rob is interested we could share. > > > > Many thanks for sharing https://code-repo.d4science.org/gCubeSystem/d4science-keycloak-themes/src/branch/master/src/utils/xquery > > > This is a bit forward of me, but would you consider changing the license away from European Union Public Licence which appears to be 'copyleft' to say BSD 3-Clause, MIT, ... > > > Adam > > On Fri, Apr 30, 2021 at 6:00 PM <basex-talk-request at mailman.uni-konstanz.de> wrote: > > > > Send BaseX-Talk mailing list submissions to > > > > basex-talk at mailman.uni-konstanz.de > > > > > > > > To subscribe or unsubscribe via the World Wide Web, visit > > > > https://mailman.uni-konstanz.de/mailman/listinfo/basex-talk > > > > or, via email, send a message with subject or body 'help' to > > > > basex-talk-request at mailman.uni-konstanz.de > > > > > > > > You can reach the person managing the list at > > > > basex-talk-owner at mailman.uni-konstanz.de > > > > > > > > When replying, please edit your Subject line so it is more specific > > > > than "Re: Contents of BaseX-Talk digest..." > > > > > > > > > > > > Today's Topics: > > > > > > > > 1. Make use of external Identity Management for BaseX (Rob) > > > > 2. Re: Reloading jars on a running http server. (Reece Dunn) > > > > 3. Getting profile information in server responses. (Reece Dunn) > > > > 4. Re: Make use of external Identity Management for BaseX > > > > (Christian Gr?n) > > > > 5. Re: Reloading jars on a running http server. (Christian Gr?n) > > > > 6. Re: Getting profile information in server responses. > > > > (Christian Gr?n) > > > > 7. Re: Reloading jars on a running http server. (Reece Dunn) > > > > 8. Re: Reloading jars on a running http server. (Christian Gr?n) > > > > 9. Re: Make use of external Identity Management for BaseX > > > > (Marco Lettere) > > > > > > > > > > > > ---------------------------------------------------------------------- > > > > > > > > Message: 1 > > > > Date: Thu, 29 Apr 2021 15:54:08 +0200 > > > > From: Rob <private at tjalma.com> > > > > To: BaseX <basex-talk at mailman.uni-konstanz.de> > > > > Subject: [basex-talk] Make use of external Identity Management for > > > > BaseX > > > > Message-ID: <39036EF3-E67D-470D-B2F4-E6FBFFDF40E6 at tjalma.com> > > > > Content-Type: text/plain; charset=utf-8 > > > > > > > > Hi, > > > > > > > > I have a question. > > > > Can BaseX make use of an Identity Management application like Keycloak for Users? > > > > > > > > I can?t find anything about it :) > > > > > > > > With kind regards, > > > > Rob Tjalma > > > > > > > > ------------------------------ > > > > > > > > Message: 2 > > > > Date: Thu, 29 Apr 2021 20:48:09 +0100 > > > > From: Reece Dunn <msclrhd at googlemail.com> > > > > To: Christian Gr?n <christian.gruen at gmail.com> > > > > Cc: BaseX <basex-talk at mailman.uni-konstanz.de> > > > > Subject: Re: [basex-talk] Reloading jars on a running http server. > > > > Message-ID: > > > > <CAGdtn24Qdgbe3=nebYA1je4hCrZVAgi_sercCRxsTxmZcWcAxQ at mail.gmail.com> > > > > Content-Type: text/plain; charset="utf-8" > > > > > > > > Hi Christian, > > > > > > > > Thanks for the response. Unfortunately, I've not been able to get the > > > > reloading working. > > > > > > > > Kind regards, > > > > Reece > > > > > > > > On Wed, 21 Apr 2021 at 18:49, Christian Gr?n <christian.gruen at gmail.com> > > > > wrote: > > > > > > > > > Hi Reece, > > > > > > > > > > If you install your Java code as JAR file in the repository [1], the > > > > > code will be loaded and unloaded every time when your query is > > > > > executed. If you get an error message? > > > > > > > > > > java.lang.reflect.InaccessibleObjectException: Unable to make field > > > > > private final jdk.internal.loader.URLClassPath > > > > > java.net.URLClassLoader.ucp accessible: module java.base does not > > > > > "opens java.net" to unnamed module @79e2c065 > > > > > > > > > > ?unloading fails [2], as you?re probably using a more recent version > > > > > of the JDK, which restricts reflective access to internal variables. > > > > > You can get around this by adding Java flags at startup time: > > > > > > > > > > --add-opens java.base/java.net=ALL-UNNAMED > > > > > --add-opens java.base/jdk.internal.loader=ALL-UNNAMED > > > > > > > > > > Maybe there are better solutions to unload JAR files today. > > > > > Suggestions are welcome! > > > > > > > > > > Hope this helps, > > > > > Christian > > > > > > > > > > [1] https://docs.basex.org/wiki/Repository#Java > > > > > [2] > > > > > https://github.com/BaseXdb/basex/blob/master/basex-core/src/main/java/org/basex/util/JarLoader.java#L34 > > > > > > > > > > > > > > > > > > > > On Tue, Apr 20, 2021 at 6:44 PM Reece Dunn <msclrhd at googlemail.com> wrote: > > > > > > > > > > > > Hi all, > > > > > > > > > > > > I'm working on a Java class that I'm importing into an XQuery, so I can > > > > > do additional processing on the data that isn't easily expressible in > > > > > XQuery (or XSLT). In order to get BaseX to pick up a modified version of > > > > > the jar file I'm building, I'm restarting the BaseX http server. > > > > > > > > > > > > This makes it slower to turn around testing the changes. Is there a > > > > > better way of doing this? > > > > > > > > > > > > Kind regards, > > > > > > Reece > > > > > > > > > -------------- next part -------------- > > > > An HTML attachment was scrubbed... > > > > URL: <http://mailman.uni-konstanz.de/pipermail/basex-talk/attachments/20210429/fba079e2/attachment-0001.htm> > > > > > > > > ------------------------------ > > > > > > > > Message: 3 > > > > Date: Thu, 29 Apr 2021 20:50:40 +0100 > > > > From: Reece Dunn <msclrhd at googlemail.com> > > > > To: BaseX <basex-talk at mailman.uni-konstanz.de> > > > > Subject: [basex-talk] Getting profile information in server responses. > > > > Message-ID: > > > > <CAGdtn26mnN7Bu3bqUN8pkS1da4eq2tQstFOnx5nqqEvZPnHdkA at mail.gmail.com> > > > > Content-Type: text/plain; charset="utf-8" > > > > > > > > Hi all, > > > > > > > > In BaseX, is there a way to get the profile timings (compile, run, print, > > > > etc.) in the response of a HTTP request via the Server-Timing header ( > > > > https://developer.mozilla.org/en-US/docs/Web/HTTP/Headers/Server-Timing)? > > > > > > > > Kind regards, > > > > Reece > > > > -------------- next part -------------- > > > > An HTML attachment was scrubbed... > > > > URL: <http://mailman.uni-konstanz.de/pipermail/basex-talk/attachments/20210429/12a4d4fa/attachment-0001.htm> > > > > > > > > ------------------------------ > > > > > > > > Message: 4 > > > > Date: Fri, 30 Apr 2021 08:47:36 +0200 > > > > From: Christian Gr?n <christian.gruen at gmail.com> > > > > To: Rob <private at tjalma.com> > > > > Cc: BaseX <basex-talk at mailman.uni-konstanz.de> > > > > Subject: Re: [basex-talk] Make use of external Identity Management for > > > > BaseX > > > > Message-ID: > > > > <CAP94bnP_-nFY6BQv38gqQdy9aoFn_gtRzgM1rW+GB7yjr=xTrA at mail.gmail.com> > > > > Content-Type: text/plain; charset="UTF-8" > > > > > > > > Hi Rob, > > > > > > > > There is no prepackaged module for Keycloak (at least I?m aware of > > > > none), but you can write your own code with XQuery. See [1] for an > > > > example how this might look like. > > > > > > > > Are you using RESTXQ? > > > > > > > > Best, > > > > Christian > > > > > > > > [1] https://code-repo.d4science.org/gCubeSystem/d4science-keycloak-themes/src/branch/master/src/utils/xquery > > > > > > > > > > > > > > > > On Thu, Apr 29, 2021 at 3:54 PM Rob <private at tjalma.com> wrote: > > > > > > > > > > Hi, > > > > > > > > > > I have a question. > > > > > Can BaseX make use of an Identity Management application like Keycloak for Users? > > > > > > > > > > I can?t find anything about it :) > > > > > > > > > > With kind regards, > > > > > Rob Tjalma > > > > > > > > > > > > ------------------------------ > > > > > > > > Message: 5 > > > > Date: Fri, 30 Apr 2021 08:48:36 +0200 > > > > From: Christian Gr?n <christian.gruen at gmail.com> > > > > To: Reece Dunn <msclrhd at googlemail.com> > > > > Cc: BaseX <basex-talk at mailman.uni-konstanz.de> > > > > Subject: Re: [basex-talk] Reloading jars on a running http server. > > > > Message-ID: > > > > <CAP94bnNs_gmotGxEa2Mp-fcJzQxiO3HdzLfcG0_KknotrZ6APQ at mail.gmail.com> > > > > Content-Type: text/plain; charset="UTF-8" > > > > > > > > Hi Reece, > > > > > > > > I?m sorry to hear that. Did you build a custom JAR file, or do you > > > > encounter problems with the JDK? > > > > > > > > Cheers, > > > > Christian > > > > > > > > > > > > > > > > On Thu, Apr 29, 2021 at 9:48 PM Reece Dunn <msclrhd at googlemail.com> wrote: > > > > > > > > > > Hi Christian, > > > > > > > > > > Thanks for the response. Unfortunately, I've not been able to get the reloading working. > > > > > > > > > > Kind regards, > > > > > Reece > > > > > > > > > > On Wed, 21 Apr 2021 at 18:49, Christian Gr?n <christian.gruen at gmail.com> wrote: > > > > >> > > > > >> Hi Reece, > > > > >> > > > > >> If you install your Java code as JAR file in the repository [1], the > > > > >> code will be loaded and unloaded every time when your query is > > > > >> executed. If you get an error message? > > > > >> > > > > >> java.lang.reflect.InaccessibleObjectException: Unable to make field > > > > >> private final jdk.internal.loader.URLClassPath > > > > >> java.net.URLClassLoader.ucp accessible: module java.base does not > > > > >> "opens java.net" to unnamed module @79e2c065 > > > > >> > > > > >> ?unloading fails [2], as you?re probably using a more recent version > > > > >> of the JDK, which restricts reflective access to internal variables. > > > > >> You can get around this by adding Java flags at startup time: > > > > >> > > > > >> --add-opens java.base/java.net=ALL-UNNAMED > > > > >> --add-opens java.base/jdk.internal.loader=ALL-UNNAMED > > > > >> > > > > >> Maybe there are better solutions to unload JAR files today. > > > > >> Suggestions are welcome! > > > > >> > > > > >> Hope this helps, > > > > >> Christian > > > > >> > > > > >> [1] https://docs.basex.org/wiki/Repository#Java > > > > >> [2] https://github.com/BaseXdb/basex/blob/master/basex-core/src/main/java/org/basex/util/JarLoader.java#L34 > > > > >> > > > > >> > > > > >> > > > > >> On Tue, Apr 20, 2021 at 6:44 PM Reece Dunn <msclrhd at googlemail.com> wrote: > > > > >> > > > > > >> > Hi all, > > > > >> > > > > > >> > I'm working on a Java class that I'm importing into an XQuery, so I can do additional processing on the data that isn't easily expressible in XQuery (or XSLT). In order to get BaseX to pick up a modified version of the jar file I'm building, I'm restarting the BaseX http server. > > > > >> > > > > > >> > This makes it slower to turn around testing the changes. Is there a better way of doing this? > > > > >> > > > > > >> > Kind regards, > > > > >> > Reece > > > > > > > > > > > > ------------------------------ > > > > > > > > Message: 6 > > > > Date: Fri, 30 Apr 2021 08:55:49 +0200 > > > > From: Christian Gr?n <christian.gruen at gmail.com> > > > > To: Reece Dunn <msclrhd at googlemail.com> > > > > Cc: BaseX <basex-talk at mailman.uni-konstanz.de> > > > > Subject: Re: [basex-talk] Getting profile information in server > > > > responses. > > > > Message-ID: > > > > <CAP94bnMCyZqRYvMEJG7EkON+FjNS0fsGWwx-_2EQrzzYPV-hZQ at mail.gmail.com> > > > > Content-Type: text/plain; charset="UTF-8" > > > > > > > > A good idea; I?ll think of ways to get this included. One challenge > > > > might be that the response is streamed to the client. This means that > > > > when creating the HTTP request headers, it will not be known yet how > > > > long the evaluation will take (and the time for evaluation may also > > > > depend on the connection speed). The time for parsing and compiling > > > > the query should be known at that time, though. ? Maybe we could > > > > suppress result streaming when timings are requested. > > > > > > > > > > > > On Thu, Apr 29, 2021 at 9:50 PM Reece Dunn <msclrhd at googlemail.com> wrote: > > > > > > > > > > Hi all, > > > > > > > > > > In BaseX, is there a way to get the profile timings (compile, run, print, etc.) in the response of a HTTP request via the Server-Timing header (https://developer.mozilla.org/en-US/docs/Web/HTTP/Headers/Server-Timing)? > > > > > > > > > > Kind regards, > > > > > Reece > > > > > > > > > > > > ------------------------------ > > > > > > > > Message: 7 > > > > Date: Fri, 30 Apr 2021 08:14:21 +0100 > > > > From: Reece Dunn <msclrhd at googlemail.com> > > > > To: Christian Gr?n <christian.gruen at gmail.com> > > > > Cc: BaseX <basex-talk at mailman.uni-konstanz.de> > > > > Subject: Re: [basex-talk] Reloading jars on a running http server. > > > > Message-ID: > > > > <CAGdtn25JU3aGsHZepExgDigQX7asNDOF=2C6PWJcz1kgQqZEfA at mail.gmail.com> > > > > Content-Type: text/plain; charset="utf-8" > > > > > > > > Hi Christian, > > > > > > > > I'm not seeing any exceptions in the console window, even when enabling the > > > > debug setting. I'm using the AdoptOpenJDK 1.8. I also have AdoptOpenJDK 11, > > > > but I assume that will have the issue you described. > > > > > > > > It's a custom-built jar using Kotlin, built via gradle. > > > > > > > > One thing that it could be is that I'm using Kotlin objects (not classes), > > > > e.g.: > > > > > > > > package test > > > > object Test { fun f(): String = "test" } > > > > > > > > and using it like: > > > > > > > > declare namespace Test = "java:test.Test"; > > > > > > > > declare function test:f() as xs:string { > > > > Test::f(Test::INSTANCE()) > > > > }; > > > > > > > > The build.gradle file is simple. It looks something like this (removing > > > > things like the junit configuration): > > > > > > > > ----- > > > > buildscript { > > > > ext.kotlin_version = "1.4.32" > > > > ext.kotlin_stdlib = "kotlin-stdlib" > > > > ext.java_version = "1.8" > > > > > > > > repositories { mavenCentral() } > > > > dependencies { classpath > > > > "org.jetbrains.kotlin:kotlin-gradle-plugin:$kotlin_version" } > > > > } > > > > > > > > apply plugin: 'kotlin' > > > > > > > > repositories { > > > > mavenCentral() > > > > mavenLocal() > > > > } > > > > > > > > compileKotlin { kotlinOptions { jvmTarget = java_version } } > > > > compileTestKotlin { kotlinOptions { jvmTarget = java_version } } > > > > > > > > dependencies { > > > > implementation "org.jetbrains.kotlin:$kotlin_stdlib:$kotlin_version" > > > > } > > > > ----- > > > > > > > > You'll need to copy the kotlin-stdlib-1.4.32.jar file in addition to the > > > > test.jar file to BaseX's lib directory. > > > > > > > > Kind regards, > > > > Reece > > > > > > > > On Fri, 30 Apr 2021 at 07:48, Christian Gr?n <christian.gruen at gmail.com> > > > > wrote: > > > > > > > > > Hi Reece, > > > > > > > > > > I?m sorry to hear that. Did you build a custom JAR file, or do you > > > > > encounter problems with the JDK? > > > > > > > > > > Cheers, > > > > > Christian > > > > > > > > > > > > > > > > > > > > On Thu, Apr 29, 2021 at 9:48 PM Reece Dunn <msclrhd at googlemail.com> wrote: > > > > > > > > > > > > Hi Christian, > > > > > > > > > > > > Thanks for the response. Unfortunately, I've not been able to get the > > > > > reloading working. > > > > > > > > > > > > Kind regards, > > > > > > Reece > > > > > > > > > > > > On Wed, 21 Apr 2021 at 18:49, Christian Gr?n <christian.gruen at gmail.com> > > > > > wrote: > > > > > >> > > > > > >> Hi Reece, > > > > > >> > > > > > >> If you install your Java code as JAR file in the repository [1], the > > > > > >> code will be loaded and unloaded every time when your query is > > > > > >> executed. If you get an error message? > > > > > >> > > > > > >> java.lang.reflect.InaccessibleObjectException: Unable to make field > > > > > >> private final jdk.internal.loader.URLClassPath > > > > > >> java.net.URLClassLoader.ucp accessible: module java.base does not > > > > > >> "opens java.net" to unnamed module @79e2c065 > > > > > >> > > > > > >> ?unloading fails [2], as you?re probably using a more recent version > > > > > >> of the JDK, which restricts reflective access to internal variables. > > > > > >> You can get around this by adding Java flags at startup time: > > > > > >> > > > > > >> --add-opens java.base/java.net=ALL-UNNAMED > > > > > >> --add-opens java.base/jdk.internal.loader=ALL-UNNAMED > > > > > >> > > > > > >> Maybe there are better solutions to unload JAR files today. > > > > > >> Suggestions are welcome! > > > > > >> > > > > > >> Hope this helps, > > > > > >> Christian > > > > > >> > > > > > >> [1] https://docs.basex.org/wiki/Repository#Java > > > > > >> [2] > > > > > https://github.com/BaseXdb/basex/blob/master/basex-core/src/main/java/org/basex/util/JarLoader.java#L34 > > > > > >> > > > > > >> > > > > > >> > > > > > >> On Tue, Apr 20, 2021 at 6:44 PM Reece Dunn <msclrhd at googlemail.com> > > > > > wrote: > > > > > >> > > > > > > >> > Hi all, > > > > > >> > > > > > > >> > I'm working on a Java class that I'm importing into an XQuery, so I > > > > > can do additional processing on the data that isn't easily expressible in > > > > > XQuery (or XSLT). In order to get BaseX to pick up a modified version of > > > > > the jar file I'm building, I'm restarting the BaseX http server. > > > > > >> > > > > > > >> > This makes it slower to turn around testing the changes. Is there a > > > > > better way of doing this? > > > > > >> > > > > > > >> > Kind regards, > > > > > >> > Reece > > > > > > > > > -------------- next part -------------- > > > > An HTML attachment was scrubbed... > > > > URL: <http://mailman.uni-konstanz.de/pipermail/basex-talk/attachments/20210430/1b9943e9/attachment-0001.htm> > > > > > > > > ------------------------------ > > > > > > > > Message: 8 > > > > Date: Fri, 30 Apr 2021 09:30:17 +0200 > > > > From: Christian Gr?n <christian.gruen at gmail.com> > > > > To: Reece Dunn <msclrhd at googlemail.com> > > > > Cc: BaseX <basex-talk at mailman.uni-konstanz.de> > > > > Subject: Re: [basex-talk] Reloading jars on a running http server. > > > > Message-ID: > > > > <CAP94bnN5QnMVBoaNzAL8WOuUo7N8MDYbM4+z=3fTqdn_eUVyZg at mail.gmail.com> > > > > Content-Type: text/plain; charset="UTF-8" > > > > > > > > Hi Reece, > > > > > > > > > You'll need to copy the kotlin-stdlib-1.4.32.jar file in addition to the test.jar file to BaseX's lib directory. > > > > > > > > Please note that JAR libraries will only be unregistered after query > > > > evalution if they are moved into the repo directory. If a library is > > > > copied into the lib directory, it will be added to the static > > > > classpath. > > > > > > > > In the given case, you could probably keep kotlin-stdlib-1.4.32.jar in > > > > the lib directory, but you?ll need to keep your development code in > > > > the repository (as described in the Wiki). It?s no problem, though, to > > > > directly modify the repo code (you don?t have to use REPO INSTALL or > > > > repo:install for that). > > > > > > > > If the problem persists, feel free to send me a little test.jar, I can > > > > then do further testing. > > > > > > > > Hope this helps, > > > > Christian > > > > > > > > > > > > On Fri, Apr 30, 2021 at 9:14 AM Reece Dunn <msclrhd at googlemail.com> wrote: > > > > > > > > > > Hi Christian, > > > > > > > > > > I'm not seeing any exceptions in the console window, even when enabling the debug setting. I'm using the AdoptOpenJDK 1.8. I also have AdoptOpenJDK 11, but I assume that will have the issue you described. > > > > > > > > > > It's a custom-built jar using Kotlin, built via gradle. > > > > > > > > > > One thing that it could be is that I'm using Kotlin objects (not classes), e.g.: > > > > > > > > > > package test > > > > > object Test { fun f(): String = "test" } > > > > > > > > > > and using it like: > > > > > > > > > > declare namespace Test = "java:test.Test"; > > > > > > > > > > declare function test:f() as xs:string { > > > > > Test::f(Test::INSTANCE()) > > > > > }; > > > > > > > > > > The build.gradle file is simple. It looks something like this (removing things like the junit configuration): > > > > > > > > > > ----- > > > > > buildscript { > > > > > ext.kotlin_version = "1.4.32" > > > > > ext.kotlin_stdlib = "kotlin-stdlib" > > > > > ext.java_version = "1.8" > > > > > > > > > > repositories { mavenCentral() } > > > > > dependencies { classpath "org.jetbrains.kotlin:kotlin-gradle-plugin:$kotlin_version" } > > > > > } > > > > > > > > > > apply plugin: 'kotlin' > > > > > > > > > > repositories { > > > > > mavenCentral() > > > > > mavenLocal() > > > > > } > > > > > > > > > > compileKotlin { kotlinOptions { jvmTarget = java_version } } > > > > > compileTestKotlin { kotlinOptions { jvmTarget = java_version } } > > > > > > > > > > dependencies { > > > > > implementation "org.jetbrains.kotlin:$kotlin_stdlib:$kotlin_version" > > > > > } > > > > > ----- > > > > > > > > > > You'll need to copy the kotlin-stdlib-1.4.32.jar file in addition to the test.jar file to BaseX's lib directory. > > > > > > > > > > Kind regards, > > > > > Reece > > > > > > > > > > On Fri, 30 Apr 2021 at 07:48, Christian Gr?n <christian.gruen at gmail.com> wrote: > > > > >> > > > > >> Hi Reece, > > > > >> > > > > >> I?m sorry to hear that. Did you build a custom JAR file, or do you > > > > >> encounter problems with the JDK? > > > > >> > > > > >> Cheers, > > > > >> Christian > > > > >> > > > > >> > > > > >> > > > > >> On Thu, Apr 29, 2021 at 9:48 PM Reece Dunn <msclrhd at googlemail.com> wrote: > > > > >> > > > > > >> > Hi Christian, > > > > >> > > > > > >> > Thanks for the response. Unfortunately, I've not been able to get the reloading working. > > > > >> > > > > > >> > Kind regards, > > > > >> > Reece > > > > >> > > > > > >> > On Wed, 21 Apr 2021 at 18:49, Christian Gr?n <christian.gruen at gmail.com> wrote: > > > > >> >> > > > > >> >> Hi Reece, > > > > >> >> > > > > >> >> If you install your Java code as JAR file in the repository [1], the > > > > >> >> code will be loaded and unloaded every time when your query is > > > > >> >> executed. If you get an error message? > > > > >> >> > > > > >> >> java.lang.reflect.InaccessibleObjectException: Unable to make field > > > > >> >> private final jdk.internal.loader.URLClassPath > > > > >> >> java.net.URLClassLoader.ucp accessible: module java.base does not > > > > >> >> "opens java.net" to unnamed module @79e2c065 > > > > >> >> > > > > >> >> ?unloading fails [2], as you?re probably using a more recent version > > > > >> >> of the JDK, which restricts reflective access to internal variables. > > > > >> >> You can get around this by adding Java flags at startup time: > > > > >> >> > > > > >> >> --add-opens java.base/java.net=ALL-UNNAMED > > > > >> >> --add-opens java.base/jdk.internal.loader=ALL-UNNAMED > > > > >> >> > > > > >> >> Maybe there are better solutions to unload JAR files today. > > > > >> >> Suggestions are welcome! > > > > >> >> > > > > >> >> Hope this helps, > > > > >> >> Christian > > > > >> >> > > > > >> >> [1] https://docs.basex.org/wiki/Repository#Java > > > > >> >> [2] https://github.com/BaseXdb/basex/blob/master/basex-core/src/main/java/org/basex/util/JarLoader.java#L34 > > > > >> >> > > > > >> >> > > > > >> >> > > > > >> >> On Tue, Apr 20, 2021 at 6:44 PM Reece Dunn <msclrhd at googlemail.com> wrote: > > > > >> >> > > > > > >> >> > Hi all, > > > > >> >> > > > > > >> >> > I'm working on a Java class that I'm importing into an XQuery, so I can do additional processing on the data that isn't easily expressible in XQuery (or XSLT). In order to get BaseX to pick up a modified version of the jar file I'm building, I'm restarting the BaseX http server. > > > > >> >> > > > > > >> >> > This makes it slower to turn around testing the changes. Is there a better way of doing this? > > > > >> >> > > > > > >> >> > Kind regards, > > > > >> >> > Reece > > > > > > > > > > > > ------------------------------ > > > > > > > > Message: 9 > > > > Date: Fri, 30 Apr 2021 09:37:14 +0200 > > > > From: Marco Lettere <m.lettere at gmail.com> > > > > To: basex-talk at mailman.uni-konstanz.de > > > > Subject: Re: [basex-talk] Make use of external Identity Management for > > > > BaseX > > > > Message-ID: <1a8d807b-9cb3-3cd4-f1b7-22aff5446154 at gmail.com> > > > > Content-Type: text/plain; charset=utf-8; format=flowed > > > > > > > > Hi Christian and Rob, > > > > as the authors of the code you point to we confirm that interacting with > > > > Keycloak in XQuery and in particular RestXQ is rather comfortable. > > > > That example is mostly a demonstration code for a tool that scrapes a > > > > site index and registers sites named gateways as public clients (in > > > > Oauth2 sense) into a Keycloak instance. > > > > It is a proof of concept (as you can see from the credentials? :-D) that > > > > has been used as a batch one-time migration in a particular setting. > > > > > > > > We have also a RestXQ module that in combination with basex:perm > > > > annotations protects access to a GUI implementing the Oauth2 Code-grant > > > > flow. If Rob is interested we could share. > > > > > > > > If there should be any plan of integrating Oauth2/OIDC flows more > > > > tightly into BaseX we could also be available for helping out. > > > > > > > > Regards, > > > > Marco. > > > > > > > > On 30/04/21 08:47, Christian Gr?n wrote: > > > > > Hi Rob, > > > > > > > > > > There is no prepackaged module for Keycloak (at least I?m aware of > > > > > none), but you can write your own code with XQuery. See [1] for an > > > > > example how this might look like. > > > > > > > > > > Are you using RESTXQ? > > > > > > > > > > Best, > > > > > Christian > > > > > > > > > > [1] https://code-repo.d4science.org/gCubeSystem/d4science-keycloak-themes/src/branch/master/src/utils/xquery > > > > > > > > > > > > > > > > > > > > On Thu, Apr 29, 2021 at 3:54 PM Rob <private at tjalma.com> wrote: > > > > >> Hi, > > > > >> > > > > >> I have a question. > > > > >> Can BaseX make use of an Identity Management application like Keycloak for Users? > > > > >> > > > > >> I can?t find anything about it :) > > > > >> > > > > >> With kind regards, > > > > >> Rob Tjalma > > > > > > > > > > > > > > > > > > > > End of BaseX-Talk Digest, Vol 136, Issue 17 > > > > *******************************************

On 01/05/21 05:29, Adam Law wrote: > If Rob isn't interested, I certain am... Yes please share > > >>We have also a RestXQ module that in combination with basex:perm > annotations protects access to a GUI implementing the Oauth2 Code-grant > flow. If Rob is interested we could share. > > Many thanks for sharing > https://code-repo.d4science.org/gCubeSystem/d4science-keycloak-themes/src/branch/master/src/utils/xquery > <https://code-repo.d4science.org/gCubeSystem/d4science-keycloak-themes/src/branch/master/src/utils/xquery> > > This is a bit forward of me, but would you consider changing the > license away from European Union Public Licence which appears to be > 'copyleft' to say BSD 3-Clause, MIT, ... > > Adam > > On Fri, Apr 30, 2021 at 6:00 PM > <basex-talk-request at mailman.uni-konstanz.de > <mailto:basex-talk-request at mailman.uni-konstanz.de>> wrote: > > Send BaseX-Talk mailing list submissions to > basex-talk at mailman.uni-konstanz.de > <mailto:basex-talk at mailman.uni-konstanz.de> > > To subscribe or unsubscribe via the World Wide Web, visit > https://mailman.uni-konstanz.de/mailman/listinfo/basex-talk > <https://mailman.uni-konstanz.de/mailman/listinfo/basex-talk> > or, via email, send a message with subject or body 'help' to > basex-talk-request at mailman.uni-konstanz.de > <mailto:basex-talk-request at mailman.uni-konstanz.de> > > You can reach the person managing the list at > basex-talk-owner at mailman.uni-konstanz.de > <mailto:basex-talk-owner at mailman.uni-konstanz.de> > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of BaseX-Talk digest..." > > > Today's Topics: > > 1. Make use of external Identity Management for BaseX (Rob) > 2. Re: Reloading jars on a running http server. (Reece Dunn) > 3. Getting profile information in server responses. (Reece Dunn) > 4. Re: Make use of external Identity Management for BaseX > (Christian Gr?n) > 5. Re: Reloading jars on a running http server. (Christian Gr?n) > 6. Re: Getting profile information in server responses. > (Christian Gr?n) > 7. Re: Reloading jars on a running http server. (Reece Dunn) > 8. Re: Reloading jars on a running http server. (Christian Gr?n) > 9. Re: Make use of external Identity Management for BaseX > (Marco Lettere) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Thu, 29 Apr 2021 15:54:08 +0200 > From: Rob <private at tjalma.com <mailto:private at tjalma.com>> > To: BaseX <basex-talk at mailman.uni-konstanz.de > <mailto:basex-talk at mailman.uni-konstanz.de>> > Subject: [basex-talk] Make use of external Identity Management for > BaseX > Message-ID: <39036EF3-E67D-470D-B2F4-E6FBFFDF40E6 at tjalma.com > <mailto:39036EF3-E67D-470D-B2F4-E6FBFFDF40E6 at tjalma.com>> > Content-Type: text/plain; charset=utf-8 > > Hi, > > I have a question. > Can BaseX make use of an Identity Management application like > Keycloak for Users? > > I can?t find anything about it :) > > With kind regards, > Rob Tjalma > > ------------------------------ > > Message: 2 > Date: Thu, 29 Apr 2021 20:48:09 +0100 > From: Reece Dunn <msclrhd at googlemail.com > <mailto:msclrhd at googlemail.com>> > To: Christian Gr?n <christian.gruen at gmail.com > <mailto:christian.gruen at gmail.com>> > Cc: BaseX <basex-talk at mailman.uni-konstanz.de > <mailto:basex-talk at mailman.uni-konstanz.de>> > Subject: Re: [basex-talk] Reloading jars on a running http server. > Message-ID: > > <CAGdtn24Qdgbe3=nebYA1je4hCrZVAgi_sercCRxsTxmZcWcAxQ at mail.gmail.com > <mailto:nebYA1je4hCrZVAgi_sercCRxsTxmZcWcAxQ at mail.gmail.com>> > Content-Type: text/plain; charset="utf-8" > > Hi Christian, > > Thanks for the response. Unfortunately, I've not been able to get the > reloading working. > > Kind regards, > Reece > > On Wed, 21 Apr 2021 at 18:49, Christian Gr?n > <christian.gruen at gmail.com <mailto:christian.gruen at gmail.com>> > wrote: > > > Hi Reece, > > > > If you install your Java code as JAR file in the repository [1], the > > code will be loaded and unloaded every time when your query is > > executed. If you get an error message? > > > > java.lang.reflect.InaccessibleObjectException: Unable to make > field > > private final jdk.internal.loader.URLClassPath > > java.net.URLClassLoader.ucp accessible: module java.base does not > > "opens java.net <http://java.net>" to unnamed module @79e2c065 > > > > ?unloading fails [2], as you?re probably using a more recent version > > of the JDK, which restricts reflective access to internal variables. > > You can get around this by adding Java flags at startup time: > > > > --add-opens java.base/java.net <http://java.net>=ALL-UNNAMED > > --add-opens java.base/jdk.internal.loader=ALL-UNNAMED > > > > Maybe there are better solutions to unload JAR files today. > > Suggestions are welcome! > > > > Hope this helps, > > Christian > > > > [1] https://docs.basex.org/wiki/Repository#Java > <https://docs.basex.org/wiki/Repository#Java> > > [2] > > > https://github.com/BaseXdb/basex/blob/master/basex-core/src/main/java/org/basex/util/JarLoader.java#L34 > <https://github.com/BaseXdb/basex/blob/master/basex-core/src/main/java/org/basex/util/JarLoader.java#L34> > > > > > > > > On Tue, Apr 20, 2021 at 6:44 PM Reece Dunn > <msclrhd at googlemail.com <mailto:msclrhd at googlemail.com>> wrote: > > > > > > Hi all, > > > > > > I'm working on a Java class that I'm importing into an XQuery, > so I can > > do additional processing on the data that isn't easily > expressible in > > XQuery (or XSLT). In order to get BaseX to pick up a modified > version of > > the jar file I'm building, I'm restarting the BaseX http server. > > > > > > This makes it slower to turn around testing the changes. Is > there a > > better way of doing this? > > > > > > Kind regards, > > > Reece > > >

On 01/05/21 17:49, Rob wrote: > > Hi all! > > > > > Sorry for the late response! > > I’m reading all the emails now, haha. > > > > > > I’m very happy to hear that it’s possible, I see you > shared the following: > > https://code-repo.d4science.org/gCubeSystem/d4science-keycloak-themes/src/branch/master/src/utils/xquery > > > > > > Thanks for sharing! > > > > > > Based on the following quote from Marco’s mail: > > "We have also a RestXQ module that in > combination with basex:perm annotations protects access to a > GUI implementing the Oauth2 Code-grant flow. If Rob is > interested we could share.” > > > > > > > The link above, is that the RESTXQ module Marco’s > been talking about? > > Or is there another RESTXQ module? > > > > > > > > With kind regards, > > Rob > > > > > > > Op 1 mei 2021, om 05:29 heeft Adam Law <adamjameslaw at gmail.com> > > het volgende geschreven: > > > > > > > > > > > > If Rob isn't interested, I certain am... > > Yes please share > > > > > > > > > > > > >>We have also a RestXQ module that > > in combination with basex:perm > > > > annotations protects access to a GUI implementing the > > Oauth2 Code-grant > > > > flow. If Rob is interested we could share. > > > > > > > > > > > > > > > > Many thanks for sharing https://code-repo.d4science.org/gCubeSystem/d4science-keycloak-themes/src/branch/master/src/utils/xquery > > > > > > > > > > > > This is a bit forward of me, but would you > > consider changing the license away from European Union > > Public Licence which appears to be 'copyleft' to say > > BSD 3-Clause, MIT, ... > > > > > > > > > > > > Adam > > > > > > > > > > On Fri, Apr 30, 2021 > > at 6:00 PM <basex-talk-request at mailman.uni-konstanz.de> > > wrote: > > > > > > > > > > > Send BaseX-Talk > > > mailing list submissions to > > > > > > basex-talk at mailman.uni-konstanz.de > > > > > > > > > > > > To subscribe or unsubscribe via the World Wide Web, > > > visit > > > > > > https://mailman.uni-konstanz.de/mailman/listinfo/basex-talk > > > > > > or, via email, send a message with subject or body > > > 'help' to > > > > > > basex-talk-request at mailman.uni-konstanz.de > > > > > > > > > > > > You can reach the person managing the list at > > > > > > basex-talk-owner at mailman.uni-konstanz.de > > > > > > > > > > > > When replying, please edit your Subject line so it > > > is more specific > > > > > > than "Re: Contents of BaseX-Talk digest..." > > > > > > > > > > > > > > > > > > Today's Topics: > > > > > > > > > > > > 1. Make use of external Identity Management for > > > BaseX (Rob) > > > > > > 2. Re: Reloading jars on a running http server. > > > (Reece Dunn) > > > > > > 3. Getting profile information in server > > > responses. (Reece Dunn) > > > > > > 4. Re: Make use of external Identity Management > > > for BaseX > > > > > > (Christian Gr?n) > > > > > > 5. Re: Reloading jars on a running http server. > > > (Christian Gr?n) > > > > > > 6. Re: Getting profile information in server > > > responses. > > > > > > (Christian Gr?n) > > > > > > 7. Re: Reloading jars on a running http server. > > > (Reece Dunn) > > > > > > 8. Re: Reloading jars on a running http server. > > > (Christian Gr?n) > > > > > > 9. Re: Make use of external Identity Management > > > for BaseX > > > > > > (Marco Lettere) > > > > > > > > > > > > > > > > > > ---------------------------------------------------------------------- > > > > > > > > > > > > Message: 1 > > > > > > Date: Thu, 29 Apr 2021 15:54:08 +0200 > > > > > > From: Rob <private at tjalma.com> > > > > > > To: BaseX <basex-talk at mailman.uni-konstanz.de> > > > > > > Subject: [basex-talk] Make use of external Identity > > > Management for > > > > > > BaseX > > > > > > Message-ID: <39036EF3-E67D-470D-B2F4-E6FBFFDF40E6 at tjalma.com> > > > > > > Content-Type: text/plain; charset=utf-8 > > > > > > > > > > > > Hi, > > > > > > > > > > > > I have a question. > > > > > > Can BaseX make use of an Identity Management > > > application like Keycloak for Users? > > > > > > > > > > > > I can?t find anything about it :) > > > > > > > > > > > > With kind regards, > > > > > > Rob Tjalma > > > > > > > > > > > > ------------------------------ > > > > > > > > > > > > Message: 2 > > > > > > Date: Thu, 29 Apr 2021 20:48:09 +0100 > > > > > > From: Reece Dunn <msclrhd at googlemail.com> > > > > > > To: Christian Gr?n <christian.gruen at gmail.com> > > > > > > Cc: BaseX <basex-talk at mailman.uni-konstanz.de> > > > > > > Subject: Re: [basex-talk] Reloading jars on a > > > running http server. > > > > > > Message-ID: > > > > > > <CAGdtn24Qdgbe3=nebYA1je4hCrZVAgi_sercCRxsTxmZcWcAxQ at mail.gmail.com> > > > > > > Content-Type: text/plain; charset="utf-8" > > > > > > > > > > > > Hi Christian, > > > > > > > > > > > > Thanks for the response. Unfortunately, I've not > > > been able to get the > > > > > > reloading working. > > > > > > > > > > > > Kind regards, > > > > > > Reece > > > > > > > > > > > > On Wed, 21 Apr 2021 at 18:49, Christian Gr?n <christian.gruen at gmail.com> > > > > > > wrote: > > > > > > > > > > > > > Hi Reece, > > > > > > > > > > > > > > If you install your Java code as JAR file in > > > the repository [1], the > > > > > > > code will be loaded and unloaded every time > > > when your query is > > > > > > > executed. If you get an error message? > > > > > > > > > > > > > > > > > java.lang.reflect.InaccessibleObjectException: > > > Unable to make field > > > > > > > private final jdk.internal.loader.URLClassPath > > > > > > > java.net.URLClassLoader.ucp accessible: module > > > java.base does not > > > > > > > "opens java.net" to unnamed > > > module @79e2c065 > > > > > > > > > > > > > > ?unloading fails [2], as you?re probably using > > > a more recent version > > > > > > > of the JDK, which restricts reflective access > > > to internal variables. > > > > > > > You can get around this by adding Java flags at > > > startup time: > > > > > > > > > > > > > > --add-opens java.base/java.net=ALL-UNNAMED > > > > > > > --add-opens > > > java.base/jdk.internal.loader=ALL-UNNAMED > > > > > > > > > > > > > > Maybe there are better solutions to unload JAR > > > files today. > > > > > > > Suggestions are welcome! > > > > > > > > > > > > > > Hope this helps, > > > > > > > Christian > > > > > > > > > > > > > > [1] https://docs.basex.org/wiki/Repository#Java > > > > > > > [2] > > > > > > > https://github.com/BaseXdb/basex/blob/master/basex-core/src/main/java/org/basex/util/JarLoader.java#L34 > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Tue, Apr 20, 2021 at 6:44 PM Reece Dunn <msclrhd at googlemail.com> > > > wrote: > > > > > > > > > > > > > > > > Hi all, > > > > > > > > > > > > > > > > I'm working on a Java class that I'm > > > importing into an XQuery, so I can > > > > > > > do additional processing on the data that isn't > > > easily expressible in > > > > > > > XQuery (or XSLT). In order to get BaseX to pick > > > up a modified version of > > > > > > > the jar file I'm building, I'm restarting the > > > BaseX http server. > > > > > > > > > > > > > > > > This makes it slower to turn around > > > testing the changes. Is there a > > > > > > > better way of doing this? > > > > > > > > > > > > > > > > Kind regards, > > > > > > > > Reece > > > > > > > > > > > > > -------------- next part -------------- > > > > > > An HTML attachment was scrubbed... > > > > > > URL: <http://mailman.uni-konstanz.de/pipermail/basex-talk/attachments/20210429/fba079e2/attachment-0001.htm> > > > > > > > > > > > > ------------------------------ > > > > > > > > > > > > Message: 3 > > > > > > Date: Thu, 29 Apr 2021 20:50:40 +0100 > > > > > > From: Reece Dunn <msclrhd at googlemail.com> > > > > > > To: BaseX <basex-talk at mailman.uni-konstanz.de> > > > > > > Subject: [basex-talk] Getting profile information in > > > server responses. > > > > > > Message-ID: > > > > > > <CAGdtn26mnN7Bu3bqUN8pkS1da4eq2tQstFOnx5nqqEvZPnHdkA at mail.gmail.com> > > > > > > Content-Type: text/plain; charset="utf-8" > > > > > > > > > > > > Hi all, > > > > > > > > > > > > In BaseX, is there a way to get the profile timings > > > (compile, run, print, > > > > > > etc.) in the response of a HTTP request via the > > > Server-Timing header ( > > > > > > https://developer.mozilla.org/en-US/docs/Web/HTTP/Headers/Server-Timing)? > > > > > > > > > > > > Kind regards, > > > > > > Reece > > > > > > -------------- next part -------------- > > > > > > An HTML attachment was scrubbed... > > > > > > URL: <http://mailman.uni-konstanz.de/pipermail/basex-talk/attachments/20210429/12a4d4fa/attachment-0001.htm> > > > > > > > > > > > > ------------------------------ > > > > > > > > > > > > Message: 4 > > > > > > Date: Fri, 30 Apr 2021 08:47:36 +0200 > > > > > > From: Christian Gr?n <christian.gruen at gmail.com> > > > > > > To: Rob <private at tjalma.com> > > > > > > Cc: BaseX <basex-talk at mailman.uni-konstanz.de> > > > > > > Subject: Re: [basex-talk] Make use of external > > > Identity Management for > > > > > > BaseX > > > > > > Message-ID: > > > > > > > > > <CAP94bnP_-nFY6BQv38gqQdy9aoFn_gtRzgM1rW+GB7yjr=xTrA at mail.gmail.com> > > > > > > Content-Type: text/plain; charset="UTF-8" > > > > > > > > > > > > Hi Rob, > > > > > > > > > > > > There is no prepackaged module for Keycloak (at > > > least I?m aware of > > > > > > none), but you can write your own code with XQuery. > > > See [1] for an > > > > > > example how this might look like. > > > > > > > > > > > > Are you using RESTXQ? > > > > > > > > > > > > Best, > > > > > > Christian > > > > > > > > > > > > [1] https://code-repo.d4science.org/gCubeSystem/d4science-keycloak-themes/src/branch/master/src/utils/xquery > > > > > > > > > > > > > > > > > > > > > > > > On Thu, Apr 29, 2021 at 3:54 PM Rob <private at tjalma.com> > > > wrote: > > > > > > > > > > > > > > Hi, > > > > > > > > > > > > > > I have a question. > > > > > > > Can BaseX make use of an Identity Management > > > application like Keycloak for Users? > > > > > > > > > > > > > > I can?t find anything about it :) > > > > > > > > > > > > > > With kind regards, > > > > > > > Rob Tjalma > > > > > > > > > > > > > > > > > > ------------------------------ > > > > > > > > > > > > Message: 5 > > > > > > Date: Fri, 30 Apr 2021 08:48:36 +0200 > > > > > > From: Christian Gr?n <christian.gruen at gmail.com> > > > > > > To: Reece Dunn <msclrhd at googlemail.com> > > > > > > Cc: BaseX <basex-talk at mailman.uni-konstanz.de> > > > > > > Subject: Re: [basex-talk] Reloading jars on a > > > running http server. > > > > > > Message-ID: > > > > > > <CAP94bnNs_gmotGxEa2Mp-fcJzQxiO3HdzLfcG0_KknotrZ6APQ at mail.gmail.com> > > > > > > Content-Type: text/plain; charset="UTF-8" > > > > > > > > > > > > Hi Reece, > > > > > > > > > > > > I?m sorry to hear that. Did you build a custom JAR > > > file, or do you > > > > > > encounter problems with the JDK? > > > > > > > > > > > > Cheers, > > > > > > Christian > > > > > > > > > > > > > > > > > > > > > > > > On Thu, Apr 29, 2021 at 9:48 PM Reece Dunn <msclrhd at googlemail.com> > > > wrote: > > > > > > > > > > > > > > Hi Christian, > > > > > > > > > > > > > > Thanks for the response. Unfortunately, I've > > > not been able to get the reloading working. > > > > > > > > > > > > > > Kind regards, > > > > > > > Reece > > > > > > > > > > > > > > On Wed, 21 Apr 2021 at 18:49, Christian Gr?n > > > <christian.gruen at gmail.com> > > > wrote: > > > > > > >> > > > > > > >> Hi Reece, > > > > > > >> > > > > > > >> If you install your Java code as JAR file > > > in the repository [1], the > > > > > > >> code will be loaded and unloaded every time > > > when your query is > > > > > > >> executed. If you get an error message? > > > > > > >> > > > > > > >> > > > java.lang.reflect.InaccessibleObjectException: > > > Unable to make field > > > > > > >> private final > > > jdk.internal.loader.URLClassPath > > > > > > >> java.net.URLClassLoader.ucp accessible: > > > module java.base does not > > > > > > >> "opens java.net" to unnamed > > > module @79e2c065 > > > > > > >> > > > > > > >> ?unloading fails [2], as you?re probably > > > using a more recent version > > > > > > >> of the JDK, which restricts reflective > > > access to internal variables. > > > > > > >> You can get around this by adding Java > > > flags at startup time: > > > > > > >> > > > > > > >> --add-opens java.base/java.net=ALL-UNNAMED > > > > > > >> --add-opens > > > java.base/jdk.internal.loader=ALL-UNNAMED > > > > > > >> > > > > > > >> Maybe there are better solutions to unload > > > JAR files today. > > > > > > >> Suggestions are welcome! > > > > > > >> > > > > > > >> Hope this helps, > > > > > > >> Christian > > > > > > >> > > > > > > >> [1] https://docs.basex.org/wiki/Repository#Java > > > > > > >> [2] https://github.com/BaseXdb/basex/blob/master/basex-core/src/main/java/org/basex/util/JarLoader.java#L34 > > > > > > >> > > > > > > >> > > > > > > >> > > > > > > >> On Tue, Apr 20, 2021 at 6:44 PM Reece Dunn > > > <msclrhd at googlemail.com> > > > wrote: > > > > > > >> > > > > > > > >> > Hi all, > > > > > > >> > > > > > > > >> > I'm working on a Java class that I'm > > > importing into an XQuery, so I can do additional > > > processing on the data that isn't easily expressible > > > in XQuery (or XSLT). In order to get BaseX to pick > > > up a modified version of the jar file I'm building, > > > I'm restarting the BaseX http server. > > > > > > >> > > > > > > > >> > This makes it slower to turn around > > > testing the changes. Is there a better way of doing > > > this? > > > > > > >> > > > > > > > >> > Kind regards, > > > > > > >> > Reece > > > > > > > > > > > > > > > > > > ------------------------------ > > > > > > > > > > > > Message: 6 > > > > > > Date: Fri, 30 Apr 2021 08:55:49 +0200 > > > > > > From: Christian Gr?n <christian.gruen at gmail.com> > > > > > > To: Reece Dunn <msclrhd at googlemail.com> > > > > > > Cc: BaseX <basex-talk at mailman.uni-konstanz.de> > > > > > > Subject: Re: [basex-talk] Getting profile > > > information in server > > > > > > responses. > > > > > > Message-ID: > > > > > > <CAP94bnMCyZqRYvMEJG7EkON+FjNS0fsGWwx-_2EQrzzYPV-hZQ at mail.gmail.com> > > > > > > Content-Type: text/plain; charset="UTF-8" > > > > > > > > > > > > A good idea; I?ll think of ways to get this > > > included. One challenge > > > > > > might be that the response is streamed to the > > > client. This means that > > > > > > when creating the HTTP request headers, it will not > > > be known yet how > > > > > > long the evaluation will take (and the time for > > > evaluation may also > > > > > > depend on the connection speed). The time for > > > parsing and compiling > > > > > > the query should be known at that time, though. ? > > > Maybe we could > > > > > > suppress result streaming when timings are > > > requested. > > > > > > > > > > > > > > > > > > On Thu, Apr 29, 2021 at 9:50 PM Reece Dunn <msclrhd at googlemail.com> > > > wrote: > > > > > > > > > > > > > > Hi all, > > > > > > > > > > > > > > In BaseX, is there a way to get the profile > > > timings (compile, run, print, etc.) in the response > > > of a HTTP request via the Server-Timing header (https://developer.mozilla.org/en-US/docs/Web/HTTP/Headers/Server-Timing)? > > > > > > > > > > > > > > Kind regards, > > > > > > > Reece > > > > > > > > > > > > > > > > > > ------------------------------ > > > > > > > > > > > > Message: 7 > > > > > > Date: Fri, 30 Apr 2021 08:14:21 +0100 > > > > > > From: Reece Dunn <msclrhd at googlemail.com> > > > > > > To: Christian Gr?n <christian.gruen at gmail.com> > > > > > > Cc: BaseX <basex-talk at mailman.uni-konstanz.de> > > > > > > Subject: Re: [basex-talk] Reloading jars on a > > > running http server. > > > > > > Message-ID: > > > > > > <CAGdtn25JU3aGsHZepExgDigQX7asNDOF=2C6PWJcz1kgQqZEfA at mail.gmail.com> > > > > > > Content-Type: text/plain; charset="utf-8" > > > > > > > > > > > > Hi Christian, > > > > > > > > > > > > I'm not seeing any exceptions in the console window, > > > even when enabling the > > > > > > debug setting. I'm using the AdoptOpenJDK 1.8. I > > > also have AdoptOpenJDK 11, > > > > > > but I assume that will have the issue you described. > > > > > > > > > > > > It's a custom-built jar using Kotlin, built via > > > gradle. > > > > > > > > > > > > One thing that it could be is that I'm using Kotlin > > > objects (not classes), > > > > > > e.g.: > > > > > > > > > > > > package test > > > > > > object Test { fun f(): String = "test" } > > > > > > > > > > > > and using it like: > > > > > > > > > > > > declare namespace Test = "java:test.Test"; > > > > > > > > > > > > declare function test:f() as xs:string { > > > > > > Test::f(Test::INSTANCE()) > > > > > > }; > > > > > > > > > > > > The build.gradle file is simple. It looks something > > > like this (removing > > > > > > things like the junit configuration): > > > > > > > > > > > > ----- > > > > > > buildscript { > > > > > > ext.kotlin_version = "1.4.32" > > > > > > ext.kotlin_stdlib = "kotlin-stdlib" > > > > > > ext.java_version = "1.8" > > > > > > > > > > > > repositories { mavenCentral() } > > > > > > dependencies { classpath > > > > > > "org.jetbrains.kotlin:kotlin-gradle-plugin:$kotlin_version" } > > > > > > } > > > > > > > > > > > > apply plugin: 'kotlin' > > > > > > > > > > > > repositories { > > > > > > mavenCentral() > > > > > > mavenLocal() > > > > > > } > > > > > > > > > > > > compileKotlin { kotlinOptions { jvmTarget = > > > java_version } } > > > > > > compileTestKotlin { kotlinOptions { jvmTarget = > > > java_version } } > > > > > > > > > > > > dependencies { > > > > > > implementation > > > "org.jetbrains.kotlin:$kotlin_stdlib:$kotlin_version" > > > > > > } > > > > > > ----- > > > > > > > > > > > > You'll need to copy the kotlin-stdlib-1.4.32.jar > > > file in addition to the > > > > > > test.jar file to BaseX's lib directory. > > > > > > > > > > > > Kind regards, > > > > > > Reece > > > > > > > > > > > > On Fri, 30 Apr 2021 at 07:48, Christian Gr?n <christian.gruen at gmail.com> > > > > > > wrote: > > > > > > > > > > > > > Hi Reece, > > > > > > > > > > > > > > I?m sorry to hear that. Did you build a custom > > > JAR file, or do you > > > > > > > encounter problems with the JDK? > > > > > > > > > > > > > > Cheers, > > > > > > > Christian > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Thu, Apr 29, 2021 at 9:48 PM Reece Dunn <msclrhd at googlemail.com> > > > wrote: > > > > > > > > > > > > > > > > Hi Christian, > > > > > > > > > > > > > > > > Thanks for the response. Unfortunately, > > > I've not been able to get the > > > > > > > reloading working. > > > > > > > > > > > > > > > > Kind regards, > > > > > > > > Reece > > > > > > > > > > > > > > > > On Wed, 21 Apr 2021 at 18:49, Christian > > > Gr?n <christian.gruen at gmail.com> > > > > > > > wrote: > > > > > > > >> > > > > > > > >> Hi Reece, > > > > > > > >> > > > > > > > >> If you install your Java code as JAR > > > file in the repository [1], the > > > > > > > >> code will be loaded and unloaded every > > > time when your query is > > > > > > > >> executed. If you get an error message? > > > > > > > >> > > > > > > > >> > > > java.lang.reflect.InaccessibleObjectException: > > > Unable to make field > > > > > > > >> private final > > > jdk.internal.loader.URLClassPath > > > > > > > >> java.net.URLClassLoader.ucp > > > accessible: module java.base does not > > > > > > > >> "opens java.net" to unnamed > > > module @79e2c065 > > > > > > > >> > > > > > > > >> ?unloading fails [2], as you?re > > > probably using a more recent version > > > > > > > >> of the JDK, which restricts reflective > > > access to internal variables. > > > > > > > >> You can get around this by adding Java > > > flags at startup time: > > > > > > > >> > > > > > > > >> --add-opens java.base/java.net=ALL-UNNAMED > > > > > > > >> --add-opens > > > java.base/jdk.internal.loader=ALL-UNNAMED > > > > > > > >> > > > > > > > >> Maybe there are better solutions to > > > unload JAR files today. > > > > > > > >> Suggestions are welcome! > > > > > > > >> > > > > > > > >> Hope this helps, > > > > > > > >> Christian > > > > > > > >> > > > > > > > >> [1] https://docs.basex.org/wiki/Repository#Java > > > > > > > >> [2] > > > > > > > https://github.com/BaseXdb/basex/blob/master/basex-core/src/main/java/org/basex/util/JarLoader.java#L34 > > > > > > > >> > > > > > > > >> > > > > > > > >> > > > > > > > >> On Tue, Apr 20, 2021 at 6:44 PM Reece > > > Dunn <msclrhd at googlemail.com> > > > > > > > wrote: > > > > > > > >> > > > > > > > > >> > Hi all, > > > > > > > >> > > > > > > > > >> > I'm working on a Java class that > > > I'm importing into an XQuery, so I > > > > > > > can do additional processing on the data that > > > isn't easily expressible in > > > > > > > XQuery (or XSLT). In order to get BaseX to pick > > > up a modified version of > > > > > > > the jar file I'm building, I'm restarting the > > > BaseX http server. > > > > > > > >> > > > > > > > > >> > This makes it slower to turn > > > around testing the changes. Is there a > > > > > > > better way of doing this? > > > > > > > >> > > > > > > > > >> > Kind regards, > > > > > > > >> > Reece > > > > > > > > > > > > > -------------- next part -------------- > > > > > > An HTML attachment was scrubbed... > > > > > > URL: <http://mailman.uni-konstanz.de/pipermail/basex-talk/attachments/20210430/1b9943e9/attachment-0001.htm> > > > > > > > > > > > > ------------------------------ > > > > > > > > > > > > Message: 8 > > > > > > Date: Fri, 30 Apr 2021 09:30:17 +0200 > > > > > > From: Christian Gr?n <christian.gruen at gmail.com> > > > > > > To: Reece Dunn <msclrhd at googlemail.com> > > > > > > Cc: BaseX <basex-talk at mailman.uni-konstanz.de> > > > > > > Subject: Re: [basex-talk] Reloading jars on a > > > running http server. > > > > > > Message-ID: > > > > > > <CAP94bnN5QnMVBoaNzAL8WOuUo7N8MDYbM4+z=3fTqdn_eUVyZg at mail.gmail.com> > > > > > > Content-Type: text/plain; charset="UTF-8" > > > > > > > > > > > > Hi Reece, > > > > > > > > > > > > > You'll need to copy the > > > kotlin-stdlib-1.4.32.jar file in addition to the > > > test.jar file to BaseX's lib directory. > > > > > > > > > > > > Please note that JAR libraries will only be > > > unregistered after query > > > > > > evalution if they are moved into the repo directory. > > > If a library is > > > > > > copied into the lib directory, it will be added to > > > the static > > > > > > classpath. > > > > > > > > > > > > In the given case, you could probably keep > > > kotlin-stdlib-1.4.32.jar in > > > > > > the lib directory, but you?ll need to keep your > > > development code in > > > > > > the repository (as described in the Wiki). It?s no > > > problem, though, to > > > > > > directly modify the repo code (you don?t have to use > > > REPO INSTALL or > > > > > > repo:install for that). > > > > > > > > > > > > If the problem persists, feel free to send me a > > > little test.jar, I can > > > > > > then do further testing. > > > > > > > > > > > > Hope this helps, > > > > > > Christian > > > > > > > > > > > > > > > > > > On Fri, Apr 30, 2021 at 9:14 AM Reece Dunn <msclrhd at googlemail.com> > > > wrote: > > > > > > > > > > > > > > Hi Christian, > > > > > > > > > > > > > > I'm not seeing any exceptions in the console > > > window, even when enabling the debug setting. I'm > > > using the AdoptOpenJDK 1.8. I also have AdoptOpenJDK > > > 11, but I assume that will have the issue you > > > described. > > > > > > > > > > > > > > It's a custom-built jar using Kotlin, built via > > > gradle. > > > > > > > > > > > > > > One thing that it could be is that I'm using > > > Kotlin objects (not classes), e.g.: > > > > > > > > > > > > > > package test > > > > > > > object Test { fun f(): String = "test" } > > > > > > > > > > > > > > and using it like: > > > > > > > > > > > > > > declare namespace Test = "java:test.Test"; > > > > > > > > > > > > > > declare function test:f() as xs:string { > > > > > > > Test::f(Test::INSTANCE()) > > > > > > > }; > > > > > > > > > > > > > > The build.gradle file is simple. It looks > > > something like this (removing things like the junit > > > configuration): > > > > > > > > > > > > > > ----- > > > > > > > buildscript { > > > > > > > ext.kotlin_version = "1.4.32" > > > > > > > ext.kotlin_stdlib = "kotlin-stdlib" > > > > > > > ext.java_version = "1.8" > > > > > > > > > > > > > > repositories { mavenCentral() } > > > > > > > dependencies { classpath > > > "org.jetbrains.kotlin:kotlin-gradle-plugin:$kotlin_version" > > > } > > > > > > > } > > > > > > > > > > > > > > apply plugin: 'kotlin' > > > > > > > > > > > > > > repositories { > > > > > > > mavenCentral() > > > > > > > mavenLocal() > > > > > > > } > > > > > > > > > > > > > > compileKotlin { kotlinOptions { jvmTarget = > > > java_version } } > > > > > > > compileTestKotlin { kotlinOptions { jvmTarget = > > > java_version } } > > > > > > > > > > > > > > dependencies { > > > > > > > implementation > > > "org.jetbrains.kotlin:$kotlin_stdlib:$kotlin_version" > > > > > > > } > > > > > > > ----- > > > > > > > > > > > > > > You'll need to copy the > > > kotlin-stdlib-1.4.32.jar file in addition to the > > > test.jar file to BaseX's lib directory. > > > > > > > > > > > > > > Kind regards, > > > > > > > Reece > > > > > > > > > > > > > > On Fri, 30 Apr 2021 at 07:48, Christian Gr?n > > > <christian.gruen at gmail.com> > > > wrote: > > > > > > >> > > > > > > >> Hi Reece, > > > > > > >> > > > > > > >> I?m sorry to hear that. Did you build a > > > custom JAR file, or do you > > > > > > >> encounter problems with the JDK? > > > > > > >> > > > > > > >> Cheers, > > > > > > >> Christian > > > > > > >> > > > > > > >> > > > > > > >> > > > > > > >> On Thu, Apr 29, 2021 at 9:48 PM Reece Dunn > > > <msclrhd at googlemail.com> > > > wrote: > > > > > > >> > > > > > > > >> > Hi Christian, > > > > > > >> > > > > > > > >> > Thanks for the response. > > > Unfortunately, I've not been able to get the > > > reloading working. > > > > > > >> > > > > > > > >> > Kind regards, > > > > > > >> > Reece > > > > > > >> > > > > > > > >> > On Wed, 21 Apr 2021 at 18:49, > > > Christian Gr?n <christian.gruen at gmail.com> > > > wrote: > > > > > > >> >> > > > > > > >> >> Hi Reece, > > > > > > >> >> > > > > > > >> >> If you install your Java code as > > > JAR file in the repository [1], the > > > > > > >> >> code will be loaded and unloaded > > > every time when your query is > > > > > > >> >> executed. If you get an error > > > message? > > > > > > >> >> > > > > > > >> >> > > > java.lang.reflect.InaccessibleObjectException: > > > Unable to make field > > > > > > >> >> private final > > > jdk.internal.loader.URLClassPath > > > > > > >> >> java.net.URLClassLoader.ucp > > > accessible: module java.base does not > > > > > > >> >> "opens java.net" to unnamed > > > module @79e2c065 > > > > > > >> >> > > > > > > >> >> ?unloading fails [2], as you?re > > > probably using a more recent version > > > > > > >> >> of the JDK, which restricts > > > reflective access to internal variables. > > > > > > >> >> You can get around this by adding > > > Java flags at startup time: > > > > > > >> >> > > > > > > >> >> --add-opens java.base/java.net=ALL-UNNAMED > > > > > > >> >> --add-opens > > > java.base/jdk.internal.loader=ALL-UNNAMED > > > > > > >> >> > > > > > > >> >> Maybe there are better solutions > > > to unload JAR files today. > > > > > > >> >> Suggestions are welcome! > > > > > > >> >> > > > > > > >> >> Hope this helps, > > > > > > >> >> Christian > > > > > > >> >> > > > > > > >> >> [1] https://docs.basex.org/wiki/Repository#Java > > > > > > >> >> [2] https://github.com/BaseXdb/basex/blob/master/basex-core/src/main/java/org/basex/util/JarLoader.java#L34 > > > > > > >> >> > > > > > > >> >> > > > > > > >> >> > > > > > > >> >> On Tue, Apr 20, 2021 at 6:44 PM > > > Reece Dunn <msclrhd at googlemail.com> > > > wrote: > > > > > > >> >> > > > > > > > >> >> > Hi all, > > > > > > >> >> > > > > > > > >> >> > I'm working on a Java class > > > that I'm importing into an XQuery, so I can do > > > additional processing on the data that isn't easily > > > expressible in XQuery (or XSLT). In order to get > > > BaseX to pick up a modified version of the jar file > > > I'm building, I'm restarting the BaseX http server. > > > > > > >> >> > > > > > > > >> >> > This makes it slower to turn > > > around testing the changes. Is there a better way of > > > doing this? > > > > > > >> >> > > > > > > > >> >> > Kind regards, > > > > > > >> >> > Reece > > > > > > > > > > > > > > > > > > ------------------------------ > > > > > > > > > > > > Message: 9 > > > > > > Date: Fri, 30 Apr 2021 09:37:14 +0200 > > > > > > From: Marco Lettere <m.lettere at gmail.com> > > > > > > To: basex-talk at mailman.uni-konstanz.de > > > > > > Subject: Re: [basex-talk] Make use of external > > > Identity Management for > > > > > > BaseX > > > > > > Message-ID: <1a8d807b-9cb3-3cd4-f1b7-22aff5446154 at gmail.com> > > > > > > Content-Type: text/plain; charset=utf-8; > > > format=flowed > > > > > > > > > > > > Hi Christian and Rob, > > > > > > as the authors of the code you point to we confirm > > > that interacting with > > > > > > Keycloak in XQuery and in particular RestXQ is > > > rather comfortable. > > > > > > That example is mostly a demonstration code for a > > > tool that scrapes a > > > > > > site index and registers sites named gateways as > > > public clients (in > > > > > > Oauth2 sense) into a Keycloak instance. > > > > > > It is a proof of concept (as you can see from the > > > credentials? :-D) that > > > > > > has been used as a batch one-time migration in a > > > particular setting. > > > > > > > > > > > > We have also a RestXQ module that in combination > > > with basex:perm > > > > > > annotations protects access to a GUI implementing > > > the Oauth2 Code-grant > > > > > > flow. If Rob is interested we could share. > > > > > > > > > > > > If there should be any plan of integrating > > > Oauth2/OIDC flows more > > > > > > tightly into BaseX we could also be available for > > > helping out. > > > > > > > > > > > > Regards, > > > > > > Marco. > > > > > > > > > > > > On 30/04/21 08:47, Christian Gr?n wrote: > > > > > > > Hi Rob, > > > > > > > > > > > > > > There is no prepackaged module for Keycloak (at > > > least I?m aware of > > > > > > > none), but you can write your own code with > > > XQuery. See [1] for an > > > > > > > example how this might look like. > > > > > > > > > > > > > > Are you using RESTXQ? > > > > > > > > > > > > > > Best, > > > > > > > Christian > > > > > > > > > > > > > > [1] https://code-repo.d4science.org/gCubeSystem/d4science-keycloak-themes/src/branch/master/src/utils/xquery > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Thu, Apr 29, 2021 at 3:54 PM Rob <private at tjalma.com> > > > wrote: > > > > > > >> Hi, > > > > > > >> > > > > > > >> I have a question. > > > > > > >> Can BaseX make use of an Identity > > > Management application like Keycloak for Users? > > > > > > >> > > > > > > >> I can?t find anything about it :) > > > > > > >> > > > > > > >> With kind regards, > > > > > > >> Rob Tjalma > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > End of BaseX-Talk Digest, Vol 136, Issue 17 > > > > > > ******************************************* > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >

> Op 3 mei 2021, om 09:23 heeft Marco Lettere <m.lettere at gmail.com> het volgende geschreven: > > > > > > > Hi Rob, > > no the code in the repository the link > refers to is more like administrative tooling for batch importing > configuration into Keycloak for administration purposes. > > I'll work on creating an excerpt of the > code that realizes Oauth2 code grant flow with RestXQ and Keycloak > and I'll share by tonight hopefully. > > Regards, > > Marco. > > > > > > > > On 01/05/21 17:49, Rob wrote: > > > > > > > > Hi all! > > > > > > > > > > Sorry for the late response! > > > > I’m reading all the emails now, haha. > > > > > > > > > > > > I’m very happy to hear that it’s possible, I see you > > shared the following: > > > > https://code-repo.d4science.org/gCubeSystem/d4science-keycloak-themes/src/branch/master/src/utils/xquery > > > > > > > > > > > > Thanks for sharing! > > > > > > > > > > > > Based on the following quote from Marco’s mail: > > > > "We have also a RestXQ module that in > > combination with basex:perm annotations protects access to a > > GUI implementing the Oauth2 Code-grant flow. If Rob is > > interested we could share.” > > > > > > > > > > > > > > The link above, is that the RESTXQ module Marco’s > > been talking about? > > > > Or is there another RESTXQ module? > > > > > > > > > > > > > > > > With kind regards, > > > > Rob > > > > > > > > > > > > > Op 1 mei 2021, om 05:29 heeft Adam Law <adamjameslaw at gmail.com> > > > het volgende geschreven: > > > > > > > > > > > > > > > > > > If Rob isn't interested, I certain am... > > > Yes please share > > > > > > > > > > > > > > > > > > >>We have also a RestXQ module that > > > in combination with basex:perm > > > > > > annotations protects access to a GUI implementing the > > > Oauth2 Code-grant > > > > > > flow. If Rob is interested we could share. > > > > > > > > > > > > > > > > > > > > > > > > Many thanks for sharing https://code-repo.d4science.org/gCubeSystem/d4science-keycloak-themes/src/branch/master/src/utils/xquery > > > > > > > > > > > > > > > > > > This is a bit forward of me, but would you > > > consider changing the license away from European Union > > > Public Licence which appears to be 'copyleft' to say > > > BSD 3-Clause, MIT, ... > > > > > > > > > > > > > > > > > > Adam > > > > > > > > > > > > > > > On Fri, Apr 30, 2021 > > > at 6:00 PM <basex-talk-request at mailman.uni-konstanz.de> > > > wrote: > > > > > > > > > > > > > > > > Send BaseX-Talk > > > > mailing list submissions to > > > > > > > > basex-talk at mailman.uni-konstanz.de > > > > > > > > > > > > > > > > To subscribe or unsubscribe via the World Wide Web, > > > > visit > > > > > > > > https://mailman.uni-konstanz.de/mailman/listinfo/basex-talk > > > > > > > > or, via email, send a message with subject or body > > > > 'help' to > > > > > > > > basex-talk-request at mailman.uni-konstanz.de > > > > > > > > > > > > > > > > You can reach the person managing the list at > > > > > > > > basex-talk-owner at mailman.uni-konstanz.de > > > > > > > > > > > > > > > > When replying, please edit your Subject line so it > > > > is more specific > > > > > > > > than "Re: Contents of BaseX-Talk digest..." > > > > > > > > > > > > > > > > > > > > > > > > Today's Topics: > > > > > > > > > > > > > > > > 1. Make use of external Identity Management for > > > > BaseX (Rob) > > > > > > > > 2. Re: Reloading jars on a running http server. > > > > (Reece Dunn) > > > > > > > > 3. Getting profile information in server > > > > responses. (Reece Dunn) > > > > > > > > 4. Re: Make use of external Identity Management > > > > for BaseX > > > > > > > > (Christian Gr?n) > > > > > > > > 5. Re: Reloading jars on a running http server. > > > > (Christian Gr?n) > > > > > > > > 6. Re: Getting profile information in server > > > > responses. > > > > > > > > (Christian Gr?n) > > > > > > > > 7. Re: Reloading jars on a running http server. > > > > (Reece Dunn) > > > > > > > > 8. Re: Reloading jars on a running http server. > > > > (Christian Gr?n) > > > > > > > > 9. Re: Make use of external Identity Management > > > > for BaseX > > > > > > > > (Marco Lettere) > > > > > > > > > > > > > > > > > > > > > > > > ---------------------------------------------------------------------- > > > > > > > > > > > > > > > > Message: 1 > > > > > > > > Date: Thu, 29 Apr 2021 15:54:08 +0200 > > > > > > > > From: Rob <private at tjalma.com> > > > > > > > > To: BaseX <basex-talk at mailman.uni-konstanz.de> > > > > > > > > Subject: [basex-talk] Make use of external Identity > > > > Management for > > > > > > > > BaseX > > > > > > > > Message-ID: <39036EF3-E67D-470D-B2F4-E6FBFFDF40E6 at tjalma.com> > > > > > > > > Content-Type: text/plain; charset=utf-8 > > > > > > > > > > > > > > > > Hi, > > > > > > > > > > > > > > > > I have a question. > > > > > > > > Can BaseX make use of an Identity Management > > > > application like Keycloak for Users? > > > > > > > > > > > > > > > > I can?t find anything about it :) > > > > > > > > > > > > > > > > With kind regards, > > > > > > > > Rob Tjalma > > > > > > > > > > > > > > > > ------------------------------ > > > > > > > > > > > > > > > > Message: 2 > > > > > > > > Date: Thu, 29 Apr 2021 20:48:09 +0100 > > > > > > > > From: Reece Dunn <msclrhd at googlemail.com> > > > > > > > > To: Christian Gr?n <christian.gruen at gmail.com> > > > > > > > > Cc: BaseX <basex-talk at mailman.uni-konstanz.de> > > > > > > > > Subject: Re: [basex-talk] Reloading jars on a > > > > running http server. > > > > > > > > Message-ID: > > > > > > > > <CAGdtn24Qdgbe3=nebYA1je4hCrZVAgi_sercCRxsTxmZcWcAxQ at mail.gmail.com> > > > > > > > > Content-Type: text/plain; charset="utf-8" > > > > > > > > > > > > > > > > Hi Christian, > > > > > > > > > > > > > > > > Thanks for the response. Unfortunately, I've not > > > > been able to get the > > > > > > > > reloading working. > > > > > > > > > > > > > > > > Kind regards, > > > > > > > > Reece > > > > > > > > > > > > > > > > On Wed, 21 Apr 2021 at 18:49, Christian Gr?n <christian.gruen at gmail.com> > > > > > > > > wrote: > > > > > > > > > > > > > > > > > Hi Reece, > > > > > > > > > > > > > > > > > > If you install your Java code as JAR file in > > > > the repository [1], the > > > > > > > > > code will be loaded and unloaded every time > > > > when your query is > > > > > > > > > executed. If you get an error message? > > > > > > > > > > > > > > > > > > > > > > java.lang.reflect.InaccessibleObjectException: > > > > Unable to make field > > > > > > > > > private final jdk.internal.loader.URLClassPath > > > > > > > > > java.net.URLClassLoader.ucp accessible: module > > > > java.base does not > > > > > > > > > "opens java.net" to unnamed > > > > module @79e2c065 > > > > > > > > > > > > > > > > > > ?unloading fails [2], as you?re probably using > > > > a more recent version > > > > > > > > > of the JDK, which restricts reflective access > > > > to internal variables. > > > > > > > > > You can get around this by adding Java flags at > > > > startup time: > > > > > > > > > > > > > > > > > > --add-opens java.base/java.net=ALL-UNNAMED > > > > > > > > > --add-opens > > > > java.base/jdk.internal.loader=ALL-UNNAMED > > > > > > > > > > > > > > > > > > Maybe there are better solutions to unload JAR > > > > files today. > > > > > > > > > Suggestions are welcome! > > > > > > > > > > > > > > > > > > Hope this helps, > > > > > > > > > Christian > > > > > > > > > > > > > > > > > > [1] https://docs.basex.org/wiki/Repository#Java > > > > > > > > > [2] > > > > > > > > > https://github.com/BaseXdb/basex/blob/master/basex-core/src/main/java/org/basex/util/JarLoader.java#L34 > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Tue, Apr 20, 2021 at 6:44 PM Reece Dunn <msclrhd at googlemail.com> > > > > wrote: > > > > > > > > > > > > > > > > > > > > Hi all, > > > > > > > > > > > > > > > > > > > > I'm working on a Java class that I'm > > > > importing into an XQuery, so I can > > > > > > > > > do additional processing on the data that isn't > > > > easily expressible in > > > > > > > > > XQuery (or XSLT). In order to get BaseX to pick > > > > up a modified version of > > > > > > > > > the jar file I'm building, I'm restarting the > > > > BaseX http server. > > > > > > > > > > > > > > > > > > > > This makes it slower to turn around > > > > testing the changes. Is there a > > > > > > > > > better way of doing this? > > > > > > > > > > > > > > > > > > > > Kind regards, > > > > > > > > > > Reece > > > > > > > > > > > > > > > > > -------------- next part -------------- > > > > > > > > An HTML attachment was scrubbed... > > > > > > > > URL: <http://mailman.uni-konstanz.de/pipermail/basex-talk/attachments/20210429/fba079e2/attachment-0001.htm> > > > > > > > > > > > > > > > > ------------------------------ > > > > > > > > > > > > > > > > Message: 3 > > > > > > > > Date: Thu, 29 Apr 2021 20:50:40 +0100 > > > > > > > > From: Reece Dunn <msclrhd at googlemail.com> > > > > > > > > To: BaseX <basex-talk at mailman.uni-konstanz.de> > > > > > > > > Subject: [basex-talk] Getting profile information in > > > > server responses. > > > > > > > > Message-ID: > > > > > > > > <CAGdtn26mnN7Bu3bqUN8pkS1da4eq2tQstFOnx5nqqEvZPnHdkA at mail.gmail.com> > > > > > > > > Content-Type: text/plain; charset="utf-8" > > > > > > > > > > > > > > > > Hi all, > > > > > > > > > > > > > > > > In BaseX, is there a way to get the profile timings > > > > (compile, run, print, > > > > > > > > etc.) in the response of a HTTP request via the > > > > Server-Timing header ( > > > > > > > > https://developer.mozilla.org/en-US/docs/Web/HTTP/Headers/Server-Timing)? > > > > > > > > > > > > > > > > Kind regards, > > > > > > > > Reece > > > > > > > > -------------- next part -------------- > > > > > > > > An HTML attachment was scrubbed... > > > > > > > > URL: <http://mailman.uni-konstanz.de/pipermail/basex-talk/attachments/20210429/12a4d4fa/attachment-0001.htm> > > > > > > > > > > > > > > > > ------------------------------ > > > > > > > > > > > > > > > > Message: 4 > > > > > > > > Date: Fri, 30 Apr 2021 08:47:36 +0200 > > > > > > > > From: Christian Gr?n <christian.gruen at gmail.com> > > > > > > > > To: Rob <private at tjalma.com> > > > > > > > > Cc: BaseX <basex-talk at mailman.uni-konstanz.de> > > > > > > > > Subject: Re: [basex-talk] Make use of external > > > > Identity Management for > > > > > > > > BaseX > > > > > > > > Message-ID: > > > > > > > > > > > > <CAP94bnP_-nFY6BQv38gqQdy9aoFn_gtRzgM1rW+GB7yjr=xTrA at mail.gmail.com> > > > > > > > > Content-Type: text/plain; charset="UTF-8" > > > > > > > > > > > > > > > > Hi Rob, > > > > > > > > > > > > > > > > There is no prepackaged module for Keycloak (at > > > > least I?m aware of > > > > > > > > none), but you can write your own code with XQuery. > > > > See [1] for an > > > > > > > > example how this might look like. > > > > > > > > > > > > > > > > Are you using RESTXQ? > > > > > > > > > > > > > > > > Best, > > > > > > > > Christian > > > > > > > > > > > > > > > > [1] https://code-repo.d4science.org/gCubeSystem/d4science-keycloak-themes/src/branch/master/src/utils/xquery > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Thu, Apr 29, 2021 at 3:54 PM Rob <private at tjalma.com> > > > > wrote: > > > > > > > > > > > > > > > > > > Hi, > > > > > > > > > > > > > > > > > > I have a question. > > > > > > > > > Can BaseX make use of an Identity Management > > > > application like Keycloak for Users? > > > > > > > > > > > > > > > > > > I can?t find anything about it :) > > > > > > > > > > > > > > > > > > With kind regards, > > > > > > > > > Rob Tjalma > > > > > > > > > > > > > > > > > > > > > > > > ------------------------------ > > > > > > > > > > > > > > > > Message: 5 > > > > > > > > Date: Fri, 30 Apr 2021 08:48:36 +0200 > > > > > > > > From: Christian Gr?n <christian.gruen at gmail.com> > > > > > > > > To: Reece Dunn <msclrhd at googlemail.com> > > > > > > > > Cc: BaseX <basex-talk at mailman.uni-konstanz.de> > > > > > > > > Subject: Re: [basex-talk] Reloading jars on a > > > > running http server. > > > > > > > > Message-ID: > > > > > > > > <CAP94bnNs_gmotGxEa2Mp-fcJzQxiO3HdzLfcG0_KknotrZ6APQ at mail.gmail.com> > > > > > > > > Content-Type: text/plain; charset="UTF-8" > > > > > > > > > > > > > > > > Hi Reece, > > > > > > > > > > > > > > > > I?m sorry to hear that. Did you build a custom JAR > > > > file, or do you > > > > > > > > encounter problems with the JDK? > > > > > > > > > > > > > > > > Cheers, > > > > > > > > Christian > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Thu, Apr 29, 2021 at 9:48 PM Reece Dunn <msclrhd at googlemail.com> > > > > wrote: > > > > > > > > > > > > > > > > > > Hi Christian, > > > > > > > > > > > > > > > > > > Thanks for the response. Unfortunately, I've > > > > not been able to get the reloading working. > > > > > > > > > > > > > > > > > > Kind regards, > > > > > > > > > Reece > > > > > > > > > > > > > > > > > > On Wed, 21 Apr 2021 at 18:49, Christian Gr?n > > > > <christian.gruen at gmail.com> > > > > wrote: > > > > > > > > >> > > > > > > > > >> Hi Reece, > > > > > > > > >> > > > > > > > > >> If you install your Java code as JAR file > > > > in the repository [1], the > > > > > > > > >> code will be loaded and unloaded every time > > > > when your query is > > > > > > > > >> executed. If you get an error message? > > > > > > > > >> > > > > > > > > >> > > > > java.lang.reflect.InaccessibleObjectException: > > > > Unable to make field > > > > > > > > >> private final > > > > jdk.internal.loader.URLClassPath > > > > > > > > >> java.net.URLClassLoader.ucp accessible: > > > > module java.base does not > > > > > > > > >> "opens java.net" to unnamed > > > > module @79e2c065 > > > > > > > > >> > > > > > > > > >> ?unloading fails [2], as you?re probably > > > > using a more recent version > > > > > > > > >> of the JDK, which restricts reflective > > > > access to internal variables. > > > > > > > > >> You can get around this by adding Java > > > > flags at startup time: > > > > > > > > >> > > > > > > > > >> --add-opens java.base/java.net=ALL-UNNAMED > > > > > > > > >> --add-opens > > > > java.base/jdk.internal.loader=ALL-UNNAMED > > > > > > > > >> > > > > > > > > >> Maybe there are better solutions to unload > > > > JAR files today. > > > > > > > > >> Suggestions are welcome! > > > > > > > > >> > > > > > > > > >> Hope this helps, > > > > > > > > >> Christian > > > > > > > > >> > > > > > > > > >> [1] https://docs.basex.org/wiki/Repository#Java > > > > > > > > >> [2] https://github.com/BaseXdb/basex/blob/master/basex-core/src/main/java/org/basex/util/JarLoader.java#L34 > > > > > > > > >> > > > > > > > > >> > > > > > > > > >> > > > > > > > > >> On Tue, Apr 20, 2021 at 6:44 PM Reece Dunn > > > > <msclrhd at googlemail.com> > > > > wrote: > > > > > > > > >> > > > > > > > > > >> > Hi all, > > > > > > > > >> > > > > > > > > > >> > I'm working on a Java class that I'm > > > > importing into an XQuery, so I can do additional > > > > processing on the data that isn't easily expressible > > > > in XQuery (or XSLT). In order to get BaseX to pick > > > > up a modified version of the jar file I'm building, > > > > I'm restarting the BaseX http server. > > > > > > > > >> > > > > > > > > > >> > This makes it slower to turn around > > > > testing the changes. Is there a better way of doing > > > > this? > > > > > > > > >> > > > > > > > > > >> > Kind regards, > > > > > > > > >> > Reece > > > > > > > > > > > > > > > > > > > > > > > > ------------------------------ > > > > > > > > > > > > > > > > Message: 6 > > > > > > > > Date: Fri, 30 Apr 2021 08:55:49 +0200 > > > > > > > > From: Christian Gr?n <christian.gruen at gmail.com> > > > > > > > > To: Reece Dunn <msclrhd at googlemail.com> > > > > > > > > Cc: BaseX <basex-talk at mailman.uni-konstanz.de> > > > > > > > > Subject: Re: [basex-talk] Getting profile > > > > information in server > > > > > > > > responses. > > > > > > > > Message-ID: > > > > > > > > <CAP94bnMCyZqRYvMEJG7EkON+FjNS0fsGWwx-_2EQrzzYPV-hZQ at mail.gmail.com> > > > > > > > > Content-Type: text/plain; charset="UTF-8" > > > > > > > > > > > > > > > > A good idea; I?ll think of ways to get this > > > > included. One challenge > > > > > > > > might be that the response is streamed to the > > > > client. This means that > > > > > > > > when creating the HTTP request headers, it will not > > > > be known yet how > > > > > > > > long the evaluation will take (and the time for > > > > evaluation may also > > > > > > > > depend on the connection speed). The time for > > > > parsing and compiling > > > > > > > > the query should be known at that time, though. ? > > > > Maybe we could > > > > > > > > suppress result streaming when timings are > > > > requested. > > > > > > > > > > > > > > > > > > > > > > > > On Thu, Apr 29, 2021 at 9:50 PM Reece Dunn <msclrhd at googlemail.com> > > > > wrote: > > > > > > > > > > > > > > > > > > Hi all, > > > > > > > > > > > > > > > > > > In BaseX, is there a way to get the profile > > > > timings (compile, run, print, etc.) in the response > > > > of a HTTP request via the Server-Timing header (https://developer.mozilla.org/en-US/docs/Web/HTTP/Headers/Server-Timing)? > > > > > > > > > > > > > > > > > > Kind regards, > > > > > > > > > Reece > > > > > > > > > > > > > > > > > > > > > > > > ------------------------------ > > > > > > > > > > > > > > > > Message: 7 > > > > > > > > Date: Fri, 30 Apr 2021 08:14:21 +0100 > > > > > > > > From: Reece Dunn <msclrhd at googlemail.com> > > > > > > > > To: Christian Gr?n <christian.gruen at gmail.com> > > > > > > > > Cc: BaseX <basex-talk at mailman.uni-konstanz.de> > > > > > > > > Subject: Re: [basex-talk] Reloading jars on a > > > > running http server. > > > > > > > > Message-ID: > > > > > > > > <CAGdtn25JU3aGsHZepExgDigQX7asNDOF=2C6PWJcz1kgQqZEfA at mail.gmail.com> > > > > > > > > Content-Type: text/plain; charset="utf-8" > > > > > > > > > > > > > > > > Hi Christian, > > > > > > > > > > > > > > > > I'm not seeing any exceptions in the console window, > > > > even when enabling the > > > > > > > > debug setting. I'm using the AdoptOpenJDK 1.8. I > > > > also have AdoptOpenJDK 11, > > > > > > > > but I assume that will have the issue you described. > > > > > > > > > > > > > > > > It's a custom-built jar using Kotlin, built via > > > > gradle. > > > > > > > > > > > > > > > > One thing that it could be is that I'm using Kotlin > > > > objects (not classes), > > > > > > > > e.g.: > > > > > > > > > > > > > > > > package test > > > > > > > > object Test { fun f(): String = "test" } > > > > > > > > > > > > > > > > and using it like: > > > > > > > > > > > > > > > > declare namespace Test = "java:test.Test"; > > > > > > > > > > > > > > > > declare function test:f() as xs:string { > > > > > > > > Test::f(Test::INSTANCE()) > > > > > > > > }; > > > > > > > > > > > > > > > > The build.gradle file is simple. It looks something > > > > like this (removing > > > > > > > > things like the junit configuration): > > > > > > > > > > > > > > > > ----- > > > > > > > > buildscript { > > > > > > > > ext.kotlin_version = "1.4.32" > > > > > > > > ext.kotlin_stdlib = "kotlin-stdlib" > > > > > > > > ext.java_version = "1.8" > > > > > > > > > > > > > > > > repositories { mavenCentral() } > > > > > > > > dependencies { classpath > > > > > > > > "org.jetbrains.kotlin:kotlin-gradle-plugin:$kotlin_version" } > > > > > > > > } > > > > > > > > > > > > > > > > apply plugin: 'kotlin' > > > > > > > > > > > > > > > > repositories { > > > > > > > > mavenCentral() > > > > > > > > mavenLocal() > > > > > > > > } > > > > > > > > > > > > > > > > compileKotlin { kotlinOptions { jvmTarget = > > > > java_version } } > > > > > > > > compileTestKotlin { kotlinOptions { jvmTarget = > > > > java_version } } > > > > > > > > > > > > > > > > dependencies { > > > > > > > > implementation > > > > "org.jetbrains.kotlin:$kotlin_stdlib:$kotlin_version" > > > > > > > > } > > > > > > > > ----- > > > > > > > > > > > > > > > > You'll need to copy the kotlin-stdlib-1.4.32.jar > > > > file in addition to the > > > > > > > > test.jar file to BaseX's lib directory. > > > > > > > > > > > > > > > > Kind regards, > > > > > > > > Reece > > > > > > > > > > > > > > > > On Fri, 30 Apr 2021 at 07:48, Christian Gr?n <christian.gruen at gmail.com> > > > > > > > > wrote: > > > > > > > > > > > > > > > > > Hi Reece, > > > > > > > > > > > > > > > > > > I?m sorry to hear that. Did you build a custom > > > > JAR file, or do you > > > > > > > > > encounter problems with the JDK? > > > > > > > > > > > > > > > > > > Cheers, > > > > > > > > > Christian > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Thu, Apr 29, 2021 at 9:48 PM Reece Dunn <msclrhd at googlemail.com> > > > > wrote: > > > > > > > > > > > > > > > > > > > > Hi Christian, > > > > > > > > > > > > > > > > > > > > Thanks for the response. Unfortunately, > > > > I've not been able to get the > > > > > > > > > reloading working. > > > > > > > > > > > > > > > > > > > > Kind regards, > > > > > > > > > > Reece > > > > > > > > > > > > > > > > > > > > On Wed, 21 Apr 2021 at 18:49, Christian > > > > Gr?n <christian.gruen at gmail.com> > > > > > > > > > wrote: > > > > > > > > > >> > > > > > > > > > >> Hi Reece, > > > > > > > > > >> > > > > > > > > > >> If you install your Java code as JAR > > > > file in the repository [1], the > > > > > > > > > >> code will be loaded and unloaded every > > > > time when your query is > > > > > > > > > >> executed. If you get an error message? > > > > > > > > > >> > > > > > > > > > >> > > > > java.lang.reflect.InaccessibleObjectException: > > > > Unable to make field > > > > > > > > > >> private final > > > > jdk.internal.loader.URLClassPath > > > > > > > > > >> java.net.URLClassLoader.ucp > > > > accessible: module java.base does not > > > > > > > > > >> "opens java.net" to unnamed > > > > module @79e2c065 > > > > > > > > > >> > > > > > > > > > >> ?unloading fails [2], as you?re > > > > probably using a more recent version > > > > > > > > > >> of the JDK, which restricts reflective > > > > access to internal variables. > > > > > > > > > >> You can get around this by adding Java > > > > flags at startup time: > > > > > > > > > >> > > > > > > > > > >> --add-opens java.base/java.net=ALL-UNNAMED > > > > > > > > > >> --add-opens > > > > java.base/jdk.internal.loader=ALL-UNNAMED > > > > > > > > > >> > > > > > > > > > >> Maybe there are better solutions to > > > > unload JAR files today. > > > > > > > > > >> Suggestions are welcome! > > > > > > > > > >> > > > > > > > > > >> Hope this helps, > > > > > > > > > >> Christian > > > > > > > > > >> > > > > > > > > > >> [1] https://docs.basex.org/wiki/Repository#Java > > > > > > > > > >> [2] > > > > > > > > > https://github.com/BaseXdb/basex/blob/master/basex-core/src/main/java/org/basex/util/JarLoader.java#L34 > > > > > > > > > >> > > > > > > > > > >> > > > > > > > > > >> > > > > > > > > > >> On Tue, Apr 20, 2021 at 6:44 PM Reece > > > > Dunn <msclrhd at googlemail.com> > > > > > > > > > wrote: > > > > > > > > > >> > > > > > > > > > > >> > Hi all, > > > > > > > > > >> > > > > > > > > > > >> > I'm working on a Java class that > > > > I'm importing into an XQuery, so I > > > > > > > > > can do additional processing on the data that > > > > isn't easily expressible in > > > > > > > > > XQuery (or XSLT). In order to get BaseX to pick > > > > up a modified version of > > > > > > > > > the jar file I'm building, I'm restarting the > > > > BaseX http server. > > > > > > > > > >> > > > > > > > > > > >> > This makes it slower to turn > > > > around testing the changes. Is there a > > > > > > > > > better way of doing this? > > > > > > > > > >> > > > > > > > > > > >> > Kind regards, > > > > > > > > > >> > Reece > > > > > > > > > > > > > > > > > -------------- next part -------------- > > > > > > > > An HTML attachment was scrubbed... > > > > > > > > URL: <http://mailman.uni-konstanz.de/pipermail/basex-talk/attachments/20210430/1b9943e9/attachment-0001.htm> > > > > > > > > > > > > > > > > ------------------------------ > > > > > > > > > > > > > > > > Message: 8 > > > > > > > > Date: Fri, 30 Apr 2021 09:30:17 +0200 > > > > > > > > From: Christian Gr?n <christian.gruen at gmail.com> > > > > > > > > To: Reece Dunn <msclrhd at googlemail.com> > > > > > > > > Cc: BaseX <basex-talk at mailman.uni-konstanz.de> > > > > > > > > Subject: Re: [basex-talk] Reloading jars on a > > > > running http server. > > > > > > > > Message-ID: > > > > > > > > <CAP94bnN5QnMVBoaNzAL8WOuUo7N8MDYbM4+z=3fTqdn_eUVyZg at mail.gmail.com> > > > > > > > > Content-Type: text/plain; charset="UTF-8" > > > > > > > > > > > > > > > > Hi Reece, > > > > > > > > > > > > > > > > > You'll need to copy the > > > > kotlin-stdlib-1.4.32.jar file in addition to the > > > > test.jar file to BaseX's lib directory. > > > > > > > > > > > > > > > > Please note that JAR libraries will only be > > > > unregistered after query > > > > > > > > evalution if they are moved into the repo directory. > > > > If a library is > > > > > > > > copied into the lib directory, it will be added to > > > > the static > > > > > > > > classpath. > > > > > > > > > > > > > > > > In the given case, you could probably keep > > > > kotlin-stdlib-1.4.32.jar in > > > > > > > > the lib directory, but you?ll need to keep your > > > > development code in > > > > > > > > the repository (as described in the Wiki). It?s no > > > > problem, though, to > > > > > > > > directly modify the repo code (you don?t have to use > > > > REPO INSTALL or > > > > > > > > repo:install for that). > > > > > > > > > > > > > > > > If the problem persists, feel free to send me a > > > > little test.jar, I can > > > > > > > > then do further testing. > > > > > > > > > > > > > > > > Hope this helps, > > > > > > > > Christian > > > > > > > > > > > > > > > > > > > > > > > > On Fri, Apr 30, 2021 at 9:14 AM Reece Dunn <msclrhd at googlemail.com> > > > > wrote: > > > > > > > > > > > > > > > > > > Hi Christian, > > > > > > > > > > > > > > > > > > I'm not seeing any exceptions in the console > > > > window, even when enabling the debug setting. I'm > > > > using the AdoptOpenJDK 1.8. I also have AdoptOpenJDK > > > > 11, but I assume that will have the issue you > > > > described. > > > > > > > > > > > > > > > > > > It's a custom-built jar using Kotlin, built via > > > > gradle. > > > > > > > > > > > > > > > > > > One thing that it could be is that I'm using > > > > Kotlin objects (not classes), e.g.: > > > > > > > > > > > > > > > > > > package test > > > > > > > > > object Test { fun f(): String = "test" } > > > > > > > > > > > > > > > > > > and using it like: > > > > > > > > > > > > > > > > > > declare namespace Test = "java:test.Test"; > > > > > > > > > > > > > > > > > > declare function test:f() as xs:string { > > > > > > > > > Test::f(Test::INSTANCE()) > > > > > > > > > }; > > > > > > > > > > > > > > > > > > The build.gradle file is simple. It looks > > > > something like this (removing things like the junit > > > > configuration): > > > > > > > > > > > > > > > > > > ----- > > > > > > > > > buildscript { > > > > > > > > > ext.kotlin_version = "1.4.32" > > > > > > > > > ext.kotlin_stdlib = "kotlin-stdlib" > > > > > > > > > ext.java_version = "1.8" > > > > > > > > > > > > > > > > > > repositories { mavenCentral() } > > > > > > > > > dependencies { classpath > > > > "org.jetbrains.kotlin:kotlin-gradle-plugin:$kotlin_version" > > > > } > > > > > > > > > } > > > > > > > > > > > > > > > > > > apply plugin: 'kotlin' > > > > > > > > > > > > > > > > > > repositories { > > > > > > > > > mavenCentral() > > > > > > > > > mavenLocal() > > > > > > > > > } > > > > > > > > > > > > > > > > > > compileKotlin { kotlinOptions { jvmTarget = > > > > java_version } } > > > > > > > > > compileTestKotlin { kotlinOptions { jvmTarget = > > > > java_version } } > > > > > > > > > > > > > > > > > > dependencies { > > > > > > > > > implementation > > > > "org.jetbrains.kotlin:$kotlin_stdlib:$kotlin_version" > > > > > > > > > } > > > > > > > > > ----- > > > > > > > > > > > > > > > > > > You'll need to copy the > > > > kotlin-stdlib-1.4.32.jar file in addition to the > > > > test.jar file to BaseX's lib directory. > > > > > > > > > > > > > > > > > > Kind regards, > > > > > > > > > Reece > > > > > > > > > > > > > > > > > > On Fri, 30 Apr 2021 at 07:48, Christian Gr?n > > > > <christian.gruen at gmail.com> > > > > wrote: > > > > > > > > >> > > > > > > > > >> Hi Reece, > > > > > > > > >> > > > > > > > > >> I?m sorry to hear that. Did you build a > > > > custom JAR file, or do you > > > > > > > > >> encounter problems with the JDK? > > > > > > > > >> > > > > > > > > >> Cheers, > > > > > > > > >> Christian > > > > > > > > >> > > > > > > > > >> > > > > > > > > >> > > > > > > > > >> On Thu, Apr 29, 2021 at 9:48 PM Reece Dunn > > > > <msclrhd at googlemail.com> > > > > wrote: > > > > > > > > >> > > > > > > > > > >> > Hi Christian, > > > > > > > > >> > > > > > > > > > >> > Thanks for the response. > > > > Unfortunately, I've not been able to get the > > > > reloading working. > > > > > > > > >> > > > > > > > > > >> > Kind regards, > > > > > > > > >> > Reece > > > > > > > > >> > > > > > > > > > >> > On Wed, 21 Apr 2021 at 18:49, > > > > Christian Gr?n <christian.gruen at gmail.com> > > > > wrote: > > > > > > > > >> >> > > > > > > > > >> >> Hi Reece, > > > > > > > > >> >> > > > > > > > > >> >> If you install your Java code as > > > > JAR file in the repository [1], the > > > > > > > > >> >> code will be loaded and unloaded > > > > every time when your query is > > > > > > > > >> >> executed. If you get an error > > > > message? > > > > > > > > >> >> > > > > > > > > >> >> > > > > java.lang.reflect.InaccessibleObjectException: > > > > Unable to make field > > > > > > > > >> >> private final > > > > jdk.internal.loader.URLClassPath > > > > > > > > >> >> java.net.URLClassLoader.ucp > > > > accessible: module java.base does not > > > > > > > > >> >> "opens java.net" to unnamed > > > > module @79e2c065 > > > > > > > > >> >> > > > > > > > > >> >> ?unloading fails [2], as you?re > > > > probably using a more recent version > > > > > > > > >> >> of the JDK, which restricts > > > > reflective access to internal variables. > > > > > > > > >> >> You can get around this by adding > > > > Java flags at startup time: > > > > > > > > >> >> > > > > > > > > >> >> --add-opens java.base/java.net=ALL-UNNAMED > > > > > > > > >> >> --add-opens > > > > java.base/jdk.internal.loader=ALL-UNNAMED > > > > > > > > >> >> > > > > > > > > >> >> Maybe there are better solutions > > > > to unload JAR files today. > > > > > > > > >> >> Suggestions are welcome! > > > > > > > > >> >> > > > > > > > > >> >> Hope this helps, > > > > > > > > >> >> Christian > > > > > > > > >> >> > > > > > > > > >> >> [1] https://docs.basex.org/wiki/Repository#Java > > > > > > > > >> >> [2] https://github.com/BaseXdb/basex/blob/master/basex-core/src/main/java/org/basex/util/JarLoader.java#L34 > > > > > > > > >> >> > > > > > > > > >> >> > > > > > > > > >> >> > > > > > > > > >> >> On Tue, Apr 20, 2021 at 6:44 PM > > > > Reece Dunn <msclrhd at googlemail.com> > > > > wrote: > > > > > > > > >> >> > > > > > > > > > >> >> > Hi all, > > > > > > > > >> >> > > > > > > > > > >> >> > I'm working on a Java class > > > > that I'm importing into an XQuery, so I can do > > > > additional processing on the data that isn't easily > > > > expressible in XQuery (or XSLT). In order to get > > > > BaseX to pick up a modified version of the jar file > > > > I'm building, I'm restarting the BaseX http server. > > > > > > > > >> >> > > > > > > > > > >> >> > This makes it slower to turn > > > > around testing the changes. Is there a better way of > > > > doing this? > > > > > > > > >> >> > > > > > > > > > >> >> > Kind regards, > > > > > > > > >> >> > Reece > > > > > > > > > > > > > > > > > > > > > > > > ------------------------------ > > > > > > > > > > > > > > > > Message: 9 > > > > > > > > Date: Fri, 30 Apr 2021 09:37:14 +0200 > > > > > > > > From: Marco Lettere <m.lettere at gmail.com> > > > > > > > > To: basex-talk at mailman.uni-konstanz.de > > > > > > > > Subject: Re: [basex-talk] Make use of external > > > > Identity Management for > > > > > > > > BaseX > > > > > > > > Message-ID: <1a8d807b-9cb3-3cd4-f1b7-22aff5446154 at gmail.com> > > > > > > > > Content-Type: text/plain; charset=utf-8; > > > > format=flowed > > > > > > > > > > > > > > > > Hi Christian and Rob, > > > > > > > > as the authors of the code you point to we confirm > > > > that interacting with > > > > > > > > Keycloak in XQuery and in particular RestXQ is > > > > rather comfortable. > > > > > > > > That example is mostly a demonstration code for a > > > > tool that scrapes a > > > > > > > > site index and registers sites named gateways as > > > > public clients (in > > > > > > > > Oauth2 sense) into a Keycloak instance. > > > > > > > > It is a proof of concept (as you can see from the > > > > credentials? :-D) that > > > > > > > > has been used as a batch one-time migration in a > > > > particular setting. > > > > > > > > > > > > > > > > We have also a RestXQ module that in combination > > > > with basex:perm > > > > > > > > annotations protects access to a GUI implementing > > > > the Oauth2 Code-grant > > > > > > > > flow. If Rob is interested we could share. > > > > > > > > > > > > > > > > If there should be any plan of integrating > > > > Oauth2/OIDC flows more > > > > > > > > tightly into BaseX we could also be available for > > > > helping out. > > > > > > > > > > > > > > > > Regards, > > > > > > > > Marco. > > > > > > > > > > > > > > > > On 30/04/21 08:47, Christian Gr?n wrote: > > > > > > > > > Hi Rob, > > > > > > > > > > > > > > > > > > There is no prepackaged module for Keycloak (at > > > > least I?m aware of > > > > > > > > > none), but you can write your own code with > > > > XQuery. See [1] for an > > > > > > > > > example how this might look like. > > > > > > > > > > > > > > > > > > Are you using RESTXQ? > > > > > > > > > > > > > > > > > > Best, > > > > > > > > > Christian > > > > > > > > > > > > > > > > > > [1] https://code-repo.d4science.org/gCubeSystem/d4science-keycloak-themes/src/branch/master/src/utils/xquery > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Thu, Apr 29, 2021 at 3:54 PM Rob <private at tjalma.com> > > > > wrote: > > > > > > > > >> Hi, > > > > > > > > >> > > > > > > > > >> I have a question. > > > > > > > > >> Can BaseX make use of an Identity > > > > Management application like Keycloak for Users? > > > > > > > > >> > > > > > > > > >> I can?t find anything about it :) > > > > > > > > >> > > > > > > > > >> With kind regards, > > > > > > > > >> Rob Tjalma > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > End of BaseX-Talk Digest, Vol 136, Issue 17 > > > > > > > > ******************************************* > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >

On 03/05/21 12:50, Rob wrote: > > Hi Marco, > > > > > Got it! > > Looking forward to the code! :) > > > > > > With kind regards, > > Rob > > > > > > Op 3 mei 2021, om 09:23 heeft Marco Lettere > > <m.lettere at gmail.com> het > > volgende geschreven: > > > > > > > > > > > > > > Hi Rob, > > > > no the code in the > > repository the link refers to is more like > > administrative tooling for batch importing > > configuration into Keycloak for administration > > purposes. > > > > I'll work on creating an > > excerpt of the code that realizes Oauth2 code grant > > flow with RestXQ and Keycloak and I'll share by > > tonight hopefully. > > > > Regards, > > > > Marco. > > > > > > > > > > > > > > > > On 01/05/21 17:49, Rob > > wrote: > > > > > > > > > > > > > > Hi all! > > > > > > > > > > > > > > > Sorry for the late response! > > > > > > I’m reading all the emails now, haha. > > > > > > > > > > > > > > > > > > I’m very happy to hear that it’s > > > possible, I see you shared the following: > > > > > > https://code-repo.d4science.org/gCubeSystem/d4science-keycloak-themes/src/branch/master/src/utils/xquery > > > > > > > > > > > > > > > > > > Thanks for sharing! > > > > > > > > > > > > > > > > > > Based on the following quote from > > > Marco’s mail: > > > > > > "We have also a RestXQ module that in > > > combination with basex:perm annotations protects > > > access to a GUI implementing the Oauth2 Code-grant > > > flow. If Rob is interested we could share.” > > > > > > > > > > > > > > > > > > > > > The > > > link above, is that the RESTXQ module Marco’s been > > > talking about? > > > > > > Or > > > is there another RESTXQ module? > > > > > > > > > > > > > > > > > > > > > > > > With kind regards, > > > > > > Rob > > > > > > > > > > > > > > > > > > > Op 1 mei 2021, om 05:29 heeft Adam > > > > Law <adamjameslaw at gmail.com> > > > > het volgende geschreven: > > > > > > > > > > > > > > > > > > > > > > > > If Rob isn't interested, I > > > > certain am... Yes please share > > > > > > > > > > > > > > > > > > > > > > > > >>We have also a RestXQ > > > > module that in combination with basex:perm > > > > > > > > > > > > annotations protects access to a GUI > > > > implementing the Oauth2 Code-grant > > > > > > > > flow. If Rob is interested we could > > > > share. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Many thanks for sharing https://code-repo.d4science.org/gCubeSystem/d4science-keycloak-themes/src/branch/master/src/utils/xquery > > > > > > > > > > > > > > > > > > > > > > > > This is a bit forward of me, > > > > but would you consider changing the > > > > license away from European Union Public > > > > Licence which appears to be 'copyleft' to > > > > say BSD 3-Clause, MIT, ... > > > > > > > > > > > > > > > > > > > > > > > > Adam > > > > > > > > > > > > > > > > > > > > On Fri, > > > > Apr 30, 2021 at 6:00 PM <basex-talk-request at mailman.uni-konstanz.de> > > > > wrote: > > > > > > > > > > > > > > > > > > > > > Send > > > > > BaseX-Talk mailing list submissions to > > > > > > > > > > basex-talk at mailman.uni-konstanz.de > > > > > > > > > > > > > > > > > > > > To subscribe or unsubscribe via the > > > > > World Wide Web, visit > > > > > > > > > > https://mailman.uni-konstanz.de/mailman/listinfo/basex-talk > > > > > > > > > > or, via email, send a message with > > > > > subject or body 'help' to > > > > > > > > > > basex-talk-request at mailman.uni-konstanz.de > > > > > > > > > > > > > > > > > > > > You can reach the person managing the > > > > > list at > > > > > > > > > > basex-talk-owner at mailman.uni-konstanz.de > > > > > > > > > > > > > > > > > > > > When replying, please edit your Subject > > > > > line so it is more specific > > > > > > > > > > than "Re: Contents of BaseX-Talk > > > > > digest..." > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Today's Topics: > > > > > > > > > > > > > > > > > > > > 1. Make use of external Identity > > > > > Management for BaseX (Rob) > > > > > > > > > > 2. Re: Reloading jars on a running > > > > > http server. (Reece Dunn) > > > > > > > > > > 3. Getting profile information in > > > > > server responses. (Reece Dunn) > > > > > > > > > > 4. Re: Make use of external Identity > > > > > Management for BaseX > > > > > > > > > > (Christian Gr?n) > > > > > > > > > > 5. Re: Reloading jars on a running > > > > > http server. (Christian Gr?n) > > > > > > > > > > 6. Re: Getting profile information in > > > > > server responses. > > > > > > > > > > (Christian Gr?n) > > > > > > > > > > 7. Re: Reloading jars on a running > > > > > http server. (Reece Dunn) > > > > > > > > > > 8. Re: Reloading jars on a running > > > > > http server. (Christian Gr?n) > > > > > > > > > > 9. Re: Make use of external Identity > > > > > Management for BaseX > > > > > > > > > > (Marco Lettere) > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ---------------------------------------------------------------------- > > > > > > > > > > > > > > > > > > > > Message: 1 > > > > > > > > > > Date: Thu, 29 Apr 2021 15:54:08 +0200 > > > > > > > > > > From: Rob <private at tjalma.com> > > > > > > > > > > To: BaseX <basex-talk at mailman.uni-konstanz.de> > > > > > > > > > > Subject: [basex-talk] Make use of > > > > > external Identity Management for > > > > > > > > > > BaseX > > > > > > > > > > Message-ID: <39036EF3-E67D-470D-B2F4-E6FBFFDF40E6 at tjalma.com> > > > > > > > > > > Content-Type: text/plain; > > > > > charset=utf-8 > > > > > > > > > > > > > > > > > > > > Hi, > > > > > > > > > > > > > > > > > > > > I have a question. > > > > > > > > > > Can BaseX make use of an Identity > > > > > Management application like Keycloak for > > > > > Users? > > > > > > > > > > > > > > > > > > > > I can?t find anything about it :) > > > > > > > > > > > > > > > > > > > > With kind regards, > > > > > > > > > > Rob Tjalma > > > > > > > > > > > > > > > > > > > > ------------------------------ > > > > > > > > > > > > > > > > > > > > Message: 2 > > > > > > > > > > Date: Thu, 29 Apr 2021 20:48:09 +0100 > > > > > > > > > > From: Reece Dunn <msclrhd at googlemail.com> > > > > > > > > > > To: Christian Gr?n <christian.gruen at gmail.com> > > > > > > > > > > Cc: BaseX <basex-talk at mailman.uni-konstanz.de> > > > > > > > > > > Subject: Re: [basex-talk] Reloading jars > > > > > on a running http server. > > > > > > > > > > Message-ID: > > > > > > > > > > <CAGdtn24Qdgbe3=nebYA1je4hCrZVAgi_sercCRxsTxmZcWcAxQ at mail.gmail.com> > > > > > > > > > > Content-Type: text/plain; > > > > > charset="utf-8" > > > > > > > > > > > > > > > > > > > > Hi Christian, > > > > > > > > > > > > > > > > > > > > Thanks for the response. Unfortunately, > > > > > I've not been able to get the > > > > > > > > > > reloading working. > > > > > > > > > > > > > > > > > > > > Kind regards, > > > > > > > > > > Reece > > > > > > > > > > > > > > > > > > > > On Wed, 21 Apr 2021 at 18:49, Christian > > > > > Gr?n <christian.gruen at gmail.com> > > > > > > > > > > wrote: > > > > > > > > > > > > > > > > > > > > > Hi Reece, > > > > > > > > > > > > > > > > > > > > > > If you install your Java code as > > > > > JAR file in the repository [1], the > > > > > > > > > > > code will be loaded and unloaded > > > > > every time when your query is > > > > > > > > > > > executed. If you get an error > > > > > message? > > > > > > > > > > > > > > > > > > > > > > > > > > > java.lang.reflect.InaccessibleObjectException: > > > > > Unable to make field > > > > > > > > > > > private final > > > > > jdk.internal.loader.URLClassPath > > > > > > > > > > > java.net.URLClassLoader.ucp > > > > > accessible: module java.base does not > > > > > > > > > > > "opens java.net" > > > > > to unnamed module @79e2c065 > > > > > > > > > > > > > > > > > > > > > > ?unloading fails [2], as you?re > > > > > probably using a more recent version > > > > > > > > > > > of the JDK, which restricts > > > > > reflective access to internal variables. > > > > > > > > > > > You can get around this by adding > > > > > Java flags at startup time: > > > > > > > > > > > > > > > > > > > > > > --add-opens java.base/java.net=ALL-UNNAMED > > > > > > > > > > > --add-opens > > > > > java.base/jdk.internal.loader=ALL-UNNAMED > > > > > > > > > > > > > > > > > > > > > > Maybe there are better solutions to > > > > > unload JAR files today. > > > > > > > > > > > Suggestions are welcome! > > > > > > > > > > > > > > > > > > > > > > Hope this helps, > > > > > > > > > > > Christian > > > > > > > > > > > > > > > > > > > > > > [1] https://docs.basex.org/wiki/Repository#Java > > > > > > > > > > > [2] > > > > > > > > > > > https://github.com/BaseXdb/basex/blob/master/basex-core/src/main/java/org/basex/util/JarLoader.java#L34 > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Tue, Apr 20, 2021 at 6:44 PM > > > > > Reece Dunn <msclrhd at googlemail.com> > > > > > wrote: > > > > > > > > > > > > > > > > > > > > > > > > Hi all, > > > > > > > > > > > > > > > > > > > > > > > > I'm working on a Java class > > > > > that I'm importing into an XQuery, so I > > > > > can > > > > > > > > > > > do additional processing on the > > > > > data that isn't easily expressible in > > > > > > > > > > > XQuery (or XSLT). In order to get > > > > > BaseX to pick up a modified version of > > > > > > > > > > > the jar file I'm building, I'm > > > > > restarting the BaseX http server. > > > > > > > > > > > > > > > > > > > > > > > > This makes it slower to turn > > > > > around testing the changes. Is there a > > > > > > > > > > > better way of doing this? > > > > > > > > > > > > > > > > > > > > > > > > Kind regards, > > > > > > > > > > > > Reece > > > > > > > > > > > > > > > > > > > > > -------------- next part -------------- > > > > > > > > > > An HTML attachment was scrubbed... > > > > > > > > > > URL: <http://mailman.uni-konstanz.de/pipermail/basex-talk/attachments/20210429/fba079e2/attachment-0001.htm> > > > > > > > > > > > > > > > > > > > > ------------------------------ > > > > > > > > > > > > > > > > > > > > Message: 3 > > > > > > > > > > Date: Thu, 29 Apr 2021 20:50:40 +0100 > > > > > > > > > > From: Reece Dunn <msclrhd at googlemail.com> > > > > > > > > > > To: BaseX <basex-talk at mailman.uni-konstanz.de> > > > > > > > > > > Subject: [basex-talk] Getting profile > > > > > information in server responses. > > > > > > > > > > Message-ID: > > > > > > > > > > <CAGdtn26mnN7Bu3bqUN8pkS1da4eq2tQstFOnx5nqqEvZPnHdkA at mail.gmail.com> > > > > > > > > > > Content-Type: text/plain; > > > > > charset="utf-8" > > > > > > > > > > > > > > > > > > > > Hi all, > > > > > > > > > > > > > > > > > > > > In BaseX, is there a way to get the > > > > > profile timings (compile, run, print, > > > > > > > > > > etc.) in the response of a HTTP request > > > > > via the Server-Timing header ( > > > > > > > > > > https://developer.mozilla.org/en-US/docs/Web/HTTP/Headers/Server-Timing)? > > > > > > > > > > > > > > > > > > > > Kind regards, > > > > > > > > > > Reece > > > > > > > > > > -------------- next part -------------- > > > > > > > > > > An HTML attachment was scrubbed... > > > > > > > > > > URL: <http://mailman.uni-konstanz.de/pipermail/basex-talk/attachments/20210429/12a4d4fa/attachment-0001.htm> > > > > > > > > > > > > > > > > > > > > ------------------------------ > > > > > > > > > > > > > > > > > > > > Message: 4 > > > > > > > > > > Date: Fri, 30 Apr 2021 08:47:36 +0200 > > > > > > > > > > From: Christian Gr?n <christian.gruen at gmail.com> > > > > > > > > > > To: Rob <private at tjalma.com> > > > > > > > > > > Cc: BaseX <basex-talk at mailman.uni-konstanz.de> > > > > > > > > > > Subject: Re: [basex-talk] Make use of > > > > > external Identity Management for > > > > > > > > > > BaseX > > > > > > > > > > Message-ID: > > > > > > > > > > > > > > > <CAP94bnP_-nFY6BQv38gqQdy9aoFn_gtRzgM1rW+GB7yjr=xTrA at mail.gmail.com> > > > > > > > > > > Content-Type: text/plain; > > > > > charset="UTF-8" > > > > > > > > > > > > > > > > > > > > Hi Rob, > > > > > > > > > > > > > > > > > > > > There is no prepackaged module for > > > > > Keycloak (at least I?m aware of > > > > > > > > > > none), but you can write your own code > > > > > with XQuery. See [1] for an > > > > > > > > > > example how this might look like. > > > > > > > > > > > > > > > > > > > > Are you using RESTXQ? > > > > > > > > > > > > > > > > > > > > Best, > > > > > > > > > > Christian > > > > > > > > > > > > > > > > > > > > [1] https://code-repo.d4science.org/gCubeSystem/d4science-keycloak-themes/src/branch/master/src/utils/xquery > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Thu, Apr 29, 2021 at 3:54 PM Rob <private at tjalma.com> > > > > > wrote: > > > > > > > > > > > > > > > > > > > > > > Hi, > > > > > > > > > > > > > > > > > > > > > > I have a question. > > > > > > > > > > > Can BaseX make use of an Identity > > > > > Management application like Keycloak for > > > > > Users? > > > > > > > > > > > > > > > > > > > > > > I can?t find anything about it :) > > > > > > > > > > > > > > > > > > > > > > With kind regards, > > > > > > > > > > > Rob Tjalma > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ------------------------------ > > > > > > > > > > > > > > > > > > > > Message: 5 > > > > > > > > > > Date: Fri, 30 Apr 2021 08:48:36 +0200 > > > > > > > > > > From: Christian Gr?n <christian.gruen at gmail.com> > > > > > > > > > > To: Reece Dunn <msclrhd at googlemail.com> > > > > > > > > > > Cc: BaseX <basex-talk at mailman.uni-konstanz.de> > > > > > > > > > > Subject: Re: [basex-talk] Reloading jars > > > > > on a running http server. > > > > > > > > > > Message-ID: > > > > > > > > > > <CAP94bnNs_gmotGxEa2Mp-fcJzQxiO3HdzLfcG0_KknotrZ6APQ at mail.gmail.com> > > > > > > > > > > Content-Type: text/plain; > > > > > charset="UTF-8" > > > > > > > > > > > > > > > > > > > > Hi Reece, > > > > > > > > > > > > > > > > > > > > I?m sorry to hear that. Did you build a > > > > > custom JAR file, or do you > > > > > > > > > > encounter problems with the JDK? > > > > > > > > > > > > > > > > > > > > Cheers, > > > > > > > > > > Christian > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Thu, Apr 29, 2021 at 9:48 PM Reece > > > > > Dunn <msclrhd at googlemail.com> > > > > > wrote: > > > > > > > > > > > > > > > > > > > > > > Hi Christian, > > > > > > > > > > > > > > > > > > > > > > Thanks for the response. > > > > > Unfortunately, I've not been able to get > > > > > the reloading working. > > > > > > > > > > > > > > > > > > > > > > Kind regards, > > > > > > > > > > > Reece > > > > > > > > > > > > > > > > > > > > > > On Wed, 21 Apr 2021 at 18:49, > > > > > Christian Gr?n <christian.gruen at gmail.com> > > > > > wrote: > > > > > > > > > > >> > > > > > > > > > > >> Hi Reece, > > > > > > > > > > >> > > > > > > > > > > >> If you install your Java code > > > > > as JAR file in the repository [1], the > > > > > > > > > > >> code will be loaded and > > > > > unloaded every time when your query is > > > > > > > > > > >> executed. If you get an error > > > > > message? > > > > > > > > > > >> > > > > > > > > > > >> > > > > > java.lang.reflect.InaccessibleObjectException: > > > > > Unable to make field > > > > > > > > > > >> private final > > > > > jdk.internal.loader.URLClassPath > > > > > > > > > > >> java.net.URLClassLoader.ucp > > > > > accessible: module java.base does not > > > > > > > > > > >> "opens java.net" > > > > > to unnamed module @79e2c065 > > > > > > > > > > >> > > > > > > > > > > >> ?unloading fails [2], as you?re > > > > > probably using a more recent version > > > > > > > > > > >> of the JDK, which restricts > > > > > reflective access to internal variables. > > > > > > > > > > >> You can get around this by > > > > > adding Java flags at startup time: > > > > > > > > > > >> > > > > > > > > > > >> --add-opens java.base/java.net=ALL-UNNAMED > > > > > > > > > > >> --add-opens > > > > > java.base/jdk.internal.loader=ALL-UNNAMED > > > > > > > > > > >> > > > > > > > > > > >> Maybe there are better > > > > > solutions to unload JAR files today. > > > > > > > > > > >> Suggestions are welcome! > > > > > > > > > > >> > > > > > > > > > > >> Hope this helps, > > > > > > > > > > >> Christian > > > > > > > > > > >> > > > > > > > > > > >> [1] https://docs.basex.org/wiki/Repository#Java > > > > > > > > > > >> [2] https://github.com/BaseXdb/basex/blob/master/basex-core/src/main/java/org/basex/util/JarLoader.java#L34 > > > > > > > > > > >> > > > > > > > > > > >> > > > > > > > > > > >> > > > > > > > > > > >> On Tue, Apr 20, 2021 at 6:44 PM > > > > > Reece Dunn <msclrhd at googlemail.com> > > > > > wrote: > > > > > > > > > > >> > > > > > > > > > > > >> > Hi all, > > > > > > > > > > >> > > > > > > > > > > > >> > I'm working on a Java > > > > > class that I'm importing into an XQuery, > > > > > so I can do additional processing on the > > > > > data that isn't easily expressible in > > > > > XQuery (or XSLT). In order to get BaseX > > > > > to pick up a modified version of the jar > > > > > file I'm building, I'm restarting the > > > > > BaseX http server. > > > > > > > > > > >> > > > > > > > > > > > >> > This makes it slower to > > > > > turn around testing the changes. Is > > > > > there a better way of doing this? > > > > > > > > > > >> > > > > > > > > > > > >> > Kind regards, > > > > > > > > > > >> > Reece > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ------------------------------ > > > > > > > > > > > > > > > > > > > > Message: 6 > > > > > > > > > > Date: Fri, 30 Apr 2021 08:55:49 +0200 > > > > > > > > > > From: Christian Gr?n <christian.gruen at gmail.com> > > > > > > > > > > To: Reece Dunn <msclrhd at googlemail.com> > > > > > > > > > > Cc: BaseX <basex-talk at mailman.uni-konstanz.de> > > > > > > > > > > Subject: Re: [basex-talk] Getting > > > > > profile information in server > > > > > > > > > > responses. > > > > > > > > > > Message-ID: > > > > > > > > > > <CAP94bnMCyZqRYvMEJG7EkON+FjNS0fsGWwx-_2EQrzzYPV-hZQ at mail.gmail.com> > > > > > > > > > > Content-Type: text/plain; > > > > > charset="UTF-8" > > > > > > > > > > > > > > > > > > > > A good idea; I?ll think of ways to get > > > > > this included. One challenge > > > > > > > > > > might be that the response is streamed > > > > > to the client. This means that > > > > > > > > > > when creating the HTTP request headers, > > > > > it will not be known yet how > > > > > > > > > > long the evaluation will take (and the > > > > > time for evaluation may also > > > > > > > > > > depend on the connection speed). The > > > > > time for parsing and compiling > > > > > > > > > > the query should be known at that time, > > > > > though. ? Maybe we could > > > > > > > > > > suppress result streaming when timings > > > > > are requested. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Thu, Apr 29, 2021 at 9:50 PM Reece > > > > > Dunn <msclrhd at googlemail.com> > > > > > wrote: > > > > > > > > > > > > > > > > > > > > > > Hi all, > > > > > > > > > > > > > > > > > > > > > > In BaseX, is there a way to get the > > > > > profile timings (compile, run, print, > > > > > etc.) in the response of a HTTP request > > > > > via the Server-Timing header (https://developer.mozilla.org/en-US/docs/Web/HTTP/Headers/Server-Timing)? > > > > > > > > > > > > > > > > > > > > > > Kind regards, > > > > > > > > > > > Reece > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ------------------------------ > > > > > > > > > > > > > > > > > > > > Message: 7 > > > > > > > > > > Date: Fri, 30 Apr 2021 08:14:21 +0100 > > > > > > > > > > From: Reece Dunn <msclrhd at googlemail.com> > > > > > > > > > > To: Christian Gr?n <christian.gruen at gmail.com> > > > > > > > > > > Cc: BaseX <basex-talk at mailman.uni-konstanz.de> > > > > > > > > > > Subject: Re: [basex-talk] Reloading jars > > > > > on a running http server. > > > > > > > > > > Message-ID: > > > > > > > > > > > > > > > <CAGdtn25JU3aGsHZepExgDigQX7asNDOF=2C6PWJcz1kgQqZEfA at mail.gmail.com> > > > > > > > > > > Content-Type: text/plain; > > > > > charset="utf-8" > > > > > > > > > > > > > > > > > > > > Hi Christian, > > > > > > > > > > > > > > > > > > > > I'm not seeing any exceptions in the > > > > > console window, even when enabling the > > > > > > > > > > debug setting. I'm using the > > > > > AdoptOpenJDK 1.8. I also have > > > > > AdoptOpenJDK 11, > > > > > > > > > > but I assume that will have the issue > > > > > you described. > > > > > > > > > > > > > > > > > > > > It's a custom-built jar using Kotlin, > > > > > built via gradle. > > > > > > > > > > > > > > > > > > > > One thing that it could be is that I'm > > > > > using Kotlin objects (not classes), > > > > > > > > > > e.g.: > > > > > > > > > > > > > > > > > > > > package test > > > > > > > > > > object Test { fun f(): String = > > > > > "test" } > > > > > > > > > > > > > > > > > > > > and using it like: > > > > > > > > > > > > > > > > > > > > declare namespace Test = > > > > > "java:test.Test"; > > > > > > > > > > > > > > > > > > > > declare function test:f() as > > > > > xs:string { > > > > > > > > > > Test::f(Test::INSTANCE()) > > > > > > > > > > }; > > > > > > > > > > > > > > > > > > > > The build.gradle file is simple. It > > > > > looks something like this (removing > > > > > > > > > > things like the junit configuration): > > > > > > > > > > > > > > > > > > > > ----- > > > > > > > > > > buildscript { > > > > > > > > > > ext.kotlin_version = "1.4.32" > > > > > > > > > > ext.kotlin_stdlib = "kotlin-stdlib" > > > > > > > > > > ext.java_version = "1.8" > > > > > > > > > > > > > > > > > > > > repositories { mavenCentral() } > > > > > > > > > > dependencies { classpath > > > > > > > > > > "org.jetbrains.kotlin:kotlin-gradle-plugin:$kotlin_version" } > > > > > > > > > > } > > > > > > > > > > > > > > > > > > > > apply plugin: 'kotlin' > > > > > > > > > > > > > > > > > > > > repositories { > > > > > > > > > > mavenCentral() > > > > > > > > > > mavenLocal() > > > > > > > > > > } > > > > > > > > > > > > > > > > > > > > compileKotlin { kotlinOptions { > > > > > jvmTarget = java_version } } > > > > > > > > > > compileTestKotlin { kotlinOptions { > > > > > jvmTarget = java_version } } > > > > > > > > > > > > > > > > > > > > dependencies { > > > > > > > > > > implementation > > > > > "org.jetbrains.kotlin:$kotlin_stdlib:$kotlin_version" > > > > > > > > > > } > > > > > > > > > > ----- > > > > > > > > > > > > > > > > > > > > You'll need to copy the > > > > > kotlin-stdlib-1.4.32.jar file in > > > > > addition to the > > > > > > > > > > test.jar file to BaseX's lib directory. > > > > > > > > > > > > > > > > > > > > Kind regards, > > > > > > > > > > Reece > > > > > > > > > > > > > > > > > > > > On Fri, 30 Apr 2021 at 07:48, Christian > > > > > Gr?n <christian.gruen at gmail.com> > > > > > > > > > > wrote: > > > > > > > > > > > > > > > > > > > > > Hi Reece, > > > > > > > > > > > > > > > > > > > > > > I?m sorry to hear that. Did you > > > > > build a custom JAR file, or do you > > > > > > > > > > > encounter problems with the JDK? > > > > > > > > > > > > > > > > > > > > > > Cheers, > > > > > > > > > > > Christian > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Thu, Apr 29, 2021 at 9:48 PM > > > > > Reece Dunn <msclrhd at googlemail.com> > > > > > wrote: > > > > > > > > > > > > > > > > > > > > > > > > Hi Christian, > > > > > > > > > > > > > > > > > > > > > > > > Thanks for the response. > > > > > Unfortunately, I've not been able to get > > > > > the > > > > > > > > > > > reloading working. > > > > > > > > > > > > > > > > > > > > > > > > Kind regards, > > > > > > > > > > > > Reece > > > > > > > > > > > > > > > > > > > > > > > > On Wed, 21 Apr 2021 at 18:49, > > > > > Christian Gr?n <christian.gruen at gmail.com> > > > > > > > > > > > wrote: > > > > > > > > > > > >> > > > > > > > > > > > >> Hi Reece, > > > > > > > > > > > >> > > > > > > > > > > > >> If you install your Java > > > > > code as JAR file in the repository [1], > > > > > the > > > > > > > > > > > >> code will be loaded and > > > > > unloaded every time when your query is > > > > > > > > > > > >> executed. If you get an > > > > > error message? > > > > > > > > > > > >> > > > > > > > > > > > >> > > > > > java.lang.reflect.InaccessibleObjectException: > > > > > Unable to make field > > > > > > > > > > > >> private final > > > > > jdk.internal.loader.URLClassPath > > > > > > > > > > > >> > > > > > java.net.URLClassLoader.ucp accessible: > > > > > module java.base does not > > > > > > > > > > > >> "opens java.net" > > > > > to unnamed module @79e2c065 > > > > > > > > > > > >> > > > > > > > > > > > >> ?unloading fails [2], as > > > > > you?re probably using a more recent > > > > > version > > > > > > > > > > > >> of the JDK, which > > > > > restricts reflective access to internal > > > > > variables. > > > > > > > > > > > >> You can get around this by > > > > > adding Java flags at startup time: > > > > > > > > > > > >> > > > > > > > > > > > >> --add-opens java.base/java.net=ALL-UNNAMED > > > > > > > > > > > >> --add-opens > > > > > java.base/jdk.internal.loader=ALL-UNNAMED > > > > > > > > > > > >> > > > > > > > > > > > >> Maybe there are better > > > > > solutions to unload JAR files today. > > > > > > > > > > > >> Suggestions are welcome! > > > > > > > > > > > >> > > > > > > > > > > > >> Hope this helps, > > > > > > > > > > > >> Christian > > > > > > > > > > > >> > > > > > > > > > > > >> [1] https://docs.basex.org/wiki/Repository#Java > > > > > > > > > > > >> [2] > > > > > > > > > > > https://github.com/BaseXdb/basex/blob/master/basex-core/src/main/java/org/basex/util/JarLoader.java#L34 > > > > > > > > > > > >> > > > > > > > > > > > >> > > > > > > > > > > > >> > > > > > > > > > > > >> On Tue, Apr 20, 2021 at > > > > > 6:44 PM Reece Dunn <msclrhd at googlemail.com> > > > > > > > > > > > wrote: > > > > > > > > > > > >> > > > > > > > > > > > > >> > Hi all, > > > > > > > > > > > >> > > > > > > > > > > > > >> > I'm working on a Java > > > > > class that I'm importing into an XQuery, > > > > > so I > > > > > > > > > > > can do additional processing on the > > > > > data that isn't easily expressible in > > > > > > > > > > > XQuery (or XSLT). In order to get > > > > > BaseX to pick up a modified version of > > > > > > > > > > > the jar file I'm building, I'm > > > > > restarting the BaseX http server. > > > > > > > > > > > >> > > > > > > > > > > > > >> > This makes it slower > > > > > to turn around testing the changes. Is > > > > > there a > > > > > > > > > > > better way of doing this? > > > > > > > > > > > >> > > > > > > > > > > > > >> > Kind regards, > > > > > > > > > > > >> > Reece > > > > > > > > > > > > > > > > > > > > > -------------- next part -------------- > > > > > > > > > > An HTML attachment was scrubbed... > > > > > > > > > > URL: <http://mailman.uni-konstanz.de/pipermail/basex-talk/attachments/20210430/1b9943e9/attachment-0001.htm> > > > > > > > > > > > > > > > > > > > > ------------------------------ > > > > > > > > > > > > > > > > > > > > Message: 8 > > > > > > > > > > Date: Fri, 30 Apr 2021 09:30:17 +0200 > > > > > > > > > > From: Christian Gr?n <christian.gruen at gmail.com> > > > > > > > > > > To: Reece Dunn <msclrhd at googlemail.com> > > > > > > > > > > Cc: BaseX <basex-talk at mailman.uni-konstanz.de> > > > > > > > > > > Subject: Re: [basex-talk] Reloading jars > > > > > on a running http server. > > > > > > > > > > Message-ID: > > > > > > > > > > > > > > > <CAP94bnN5QnMVBoaNzAL8WOuUo7N8MDYbM4+z=3fTqdn_eUVyZg at mail.gmail.com> > > > > > > > > > > Content-Type: text/plain; > > > > > charset="UTF-8" > > > > > > > > > > > > > > > > > > > > Hi Reece, > > > > > > > > > > > > > > > > > > > > > You'll need to copy the > > > > > kotlin-stdlib-1.4.32.jar file in > > > > > addition to the test.jar file to BaseX's > > > > > lib directory. > > > > > > > > > > > > > > > > > > > > Please note that JAR libraries will only > > > > > be unregistered after query > > > > > > > > > > evalution if they are moved into the > > > > > repo directory. If a library is > > > > > > > > > > copied into the lib directory, it will > > > > > be added to the static > > > > > > > > > > classpath. > > > > > > > > > > > > > > > > > > > > In the given case, you could probably > > > > > keep kotlin-stdlib-1.4.32.jar in > > > > > > > > > > the lib directory, but you?ll need to > > > > > keep your development code in > > > > > > > > > > the repository (as described in the > > > > > Wiki). It?s no problem, though, to > > > > > > > > > > directly modify the repo code (you don?t > > > > > have to use REPO INSTALL or > > > > > > > > > > repo:install for that). > > > > > > > > > > > > > > > > > > > > If the problem persists, feel free to > > > > > send me a little test.jar, I can > > > > > > > > > > then do further testing. > > > > > > > > > > > > > > > > > > > > Hope this helps, > > > > > > > > > > Christian > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Fri, Apr 30, 2021 at 9:14 AM Reece > > > > > Dunn <msclrhd at googlemail.com> > > > > > wrote: > > > > > > > > > > > > > > > > > > > > > > Hi Christian, > > > > > > > > > > > > > > > > > > > > > > I'm not seeing any exceptions in > > > > > the console window, even when enabling > > > > > the debug setting. I'm using the > > > > > AdoptOpenJDK 1.8. I also have > > > > > AdoptOpenJDK 11, but I assume that will > > > > > have the issue you described. > > > > > > > > > > > > > > > > > > > > > > It's a custom-built jar using > > > > > Kotlin, built via gradle. > > > > > > > > > > > > > > > > > > > > > > One thing that it could be is that > > > > > I'm using Kotlin objects (not classes), > > > > > e.g.: > > > > > > > > > > > > > > > > > > > > > > package test > > > > > > > > > > > object Test { fun f(): String = > > > > > "test" } > > > > > > > > > > > > > > > > > > > > > > and using it like: > > > > > > > > > > > > > > > > > > > > > > declare namespace Test = > > > > > "java:test.Test"; > > > > > > > > > > > > > > > > > > > > > > declare function test:f() as > > > > > xs:string { > > > > > > > > > > > Test::f(Test::INSTANCE()) > > > > > > > > > > > }; > > > > > > > > > > > > > > > > > > > > > > The build.gradle file is simple. It > > > > > looks something like this (removing > > > > > things like the junit configuration): > > > > > > > > > > > > > > > > > > > > > > ----- > > > > > > > > > > > buildscript { > > > > > > > > > > > ext.kotlin_version = "1.4.32" > > > > > > > > > > > ext.kotlin_stdlib = > > > > > "kotlin-stdlib" > > > > > > > > > > > ext.java_version = "1.8" > > > > > > > > > > > > > > > > > > > > > > repositories { mavenCentral() } > > > > > > > > > > > dependencies { classpath > > > > > "org.jetbrains.kotlin:kotlin-gradle-plugin:$kotlin_version" > > > > > } > > > > > > > > > > > } > > > > > > > > > > > > > > > > > > > > > > apply plugin: 'kotlin' > > > > > > > > > > > > > > > > > > > > > > repositories { > > > > > > > > > > > mavenCentral() > > > > > > > > > > > mavenLocal() > > > > > > > > > > > } > > > > > > > > > > > > > > > > > > > > > > compileKotlin { kotlinOptions { > > > > > jvmTarget = java_version } } > > > > > > > > > > > compileTestKotlin { kotlinOptions { > > > > > jvmTarget = java_version } } > > > > > > > > > > > > > > > > > > > > > > dependencies { > > > > > > > > > > > implementation > > > > > "org.jetbrains.kotlin:$kotlin_stdlib:$kotlin_version" > > > > > > > > > > > } > > > > > > > > > > > ----- > > > > > > > > > > > > > > > > > > > > > > You'll need to copy the > > > > > kotlin-stdlib-1.4.32.jar file in > > > > > addition to the test.jar file to BaseX's > > > > > lib directory. > > > > > > > > > > > > > > > > > > > > > > Kind regards, > > > > > > > > > > > Reece > > > > > > > > > > > > > > > > > > > > > > On Fri, 30 Apr 2021 at 07:48, > > > > > Christian Gr?n <christian.gruen at gmail.com> > > > > > wrote: > > > > > > > > > > >> > > > > > > > > > > >> Hi Reece, > > > > > > > > > > >> > > > > > > > > > > >> I?m sorry to hear that. Did you > > > > > build a custom JAR file, or do you > > > > > > > > > > >> encounter problems with the > > > > > JDK? > > > > > > > > > > >> > > > > > > > > > > >> Cheers, > > > > > > > > > > >> Christian > > > > > > > > > > >> > > > > > > > > > > >> > > > > > > > > > > >> > > > > > > > > > > >> On Thu, Apr 29, 2021 at 9:48 PM > > > > > Reece Dunn <msclrhd at googlemail.com> > > > > > wrote: > > > > > > > > > > >> > > > > > > > > > > > >> > Hi Christian, > > > > > > > > > > >> > > > > > > > > > > > >> > Thanks for the response. > > > > > Unfortunately, I've not been able to get > > > > > the reloading working. > > > > > > > > > > >> > > > > > > > > > > > >> > Kind regards, > > > > > > > > > > >> > Reece > > > > > > > > > > >> > > > > > > > > > > > >> > On Wed, 21 Apr 2021 at > > > > > 18:49, Christian Gr?n <christian.gruen at gmail.com> > > > > > wrote: > > > > > > > > > > >> >> > > > > > > > > > > >> >> Hi Reece, > > > > > > > > > > >> >> > > > > > > > > > > >> >> If you install your > > > > > Java code as JAR file in the repository > > > > > [1], the > > > > > > > > > > >> >> code will be loaded > > > > > and unloaded every time when your query > > > > > is > > > > > > > > > > >> >> executed. If you get > > > > > an error message? > > > > > > > > > > >> >> > > > > > > > > > > >> >> > > > > > java.lang.reflect.InaccessibleObjectException: > > > > > Unable to make field > > > > > > > > > > >> >> private final > > > > > jdk.internal.loader.URLClassPath > > > > > > > > > > >> >> > > > > > java.net.URLClassLoader.ucp accessible: > > > > > module java.base does not > > > > > > > > > > >> >> "opens java.net" > > > > > to unnamed module @79e2c065 > > > > > > > > > > >> >> > > > > > > > > > > >> >> ?unloading fails [2], > > > > > as you?re probably using a more recent > > > > > version > > > > > > > > > > >> >> of the JDK, which > > > > > restricts reflective access to internal > > > > > variables. > > > > > > > > > > >> >> You can get around > > > > > this by adding Java flags at startup > > > > > time: > > > > > > > > > > >> >> > > > > > > > > > > >> >> --add-opens > > > > > java.base/java.net=ALL-UNNAMED > > > > > > > > > > >> >> --add-opens > > > > > java.base/jdk.internal.loader=ALL-UNNAMED > > > > > > > > > > >> >> > > > > > > > > > > >> >> Maybe there are better > > > > > solutions to unload JAR files today. > > > > > > > > > > >> >> Suggestions are > > > > > welcome! > > > > > > > > > > >> >> > > > > > > > > > > >> >> Hope this helps, > > > > > > > > > > >> >> Christian > > > > > > > > > > >> >> > > > > > > > > > > >> >> [1] https://docs.basex.org/wiki/Repository#Java > > > > > > > > > > >> >> [2] https://github.com/BaseXdb/basex/blob/master/basex-core/src/main/java/org/basex/util/JarLoader.java#L34 > > > > > > > > > > >> >> > > > > > > > > > > >> >> > > > > > > > > > > >> >> > > > > > > > > > > >> >> On Tue, Apr 20, 2021 > > > > > at 6:44 PM Reece Dunn <msclrhd at googlemail.com> > > > > > wrote: > > > > > > > > > > >> >> > > > > > > > > > > > >> >> > Hi all, > > > > > > > > > > >> >> > > > > > > > > > > > >> >> > I'm working on a > > > > > Java class that I'm importing into an > > > > > XQuery, so I can do additional > > > > > processing on the data that isn't easily > > > > > expressible in XQuery (or XSLT). In > > > > > order to get BaseX to pick up a modified > > > > > version of the jar file I'm building, > > > > > I'm restarting the BaseX http server. > > > > > > > > > > >> >> > > > > > > > > > > > >> >> > This makes it > > > > > slower to turn around testing the > > > > > changes. Is there a better way of doing > > > > > this? > > > > > > > > > > >> >> > > > > > > > > > > > >> >> > Kind regards, > > > > > > > > > > >> >> > Reece > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ------------------------------ > > > > > > > > > > > > > > > > > > > > Message: 9 > > > > > > > > > > Date: Fri, 30 Apr 2021 09:37:14 +0200 > > > > > > > > > > From: Marco Lettere <m.lettere at gmail.com> > > > > > > > > > > To: basex-talk at mailman.uni-konstanz.de > > > > > > > > > > Subject: Re: [basex-talk] Make use of > > > > > external Identity Management for > > > > > > > > > > BaseX > > > > > > > > > > Message-ID: <1a8d807b-9cb3-3cd4-f1b7-22aff5446154 at gmail.com> > > > > > > > > > > Content-Type: text/plain; charset=utf-8; > > > > > format=flowed > > > > > > > > > > > > > > > > > > > > Hi Christian and Rob, > > > > > > > > > > as the authors of the code you point to > > > > > we confirm that interacting with > > > > > > > > > > Keycloak in XQuery and in particular > > > > > RestXQ is rather comfortable. > > > > > > > > > > That example is mostly a demonstration > > > > > code for a tool that scrapes a > > > > > > > > > > site index and registers sites named > > > > > gateways as public clients (in > > > > > > > > > > Oauth2 sense) into a Keycloak instance. > > > > > > > > > > It is a proof of concept (as you can see > > > > > from the credentials? :-D) that > > > > > > > > > > has been used as a batch one-time > > > > > migration in a particular setting. > > > > > > > > > > > > > > > > > > > > We have also a RestXQ module that in > > > > > combination with basex:perm > > > > > > > > > > annotations protects access to a GUI > > > > > implementing the Oauth2 Code-grant > > > > > > > > > > flow. If Rob is interested we could > > > > > share. > > > > > > > > > > > > > > > > > > > > If there should be any plan of > > > > > integrating Oauth2/OIDC flows more > > > > > > > > > > tightly into BaseX we could also be > > > > > available for helping out. > > > > > > > > > > > > > > > > > > > > Regards, > > > > > > > > > > Marco. > > > > > > > > > > > > > > > > > > > > On 30/04/21 08:47, Christian Gr?n wrote: > > > > > > > > > > > Hi Rob, > > > > > > > > > > > > > > > > > > > > > > There is no prepackaged module for > > > > > Keycloak (at least I?m aware of > > > > > > > > > > > none), but you can write your own > > > > > code with XQuery. See [1] for an > > > > > > > > > > > example how this might look like. > > > > > > > > > > > > > > > > > > > > > > Are you using RESTXQ? > > > > > > > > > > > > > > > > > > > > > > Best, > > > > > > > > > > > Christian > > > > > > > > > > > > > > > > > > > > > > [1] https://code-repo.d4science.org/gCubeSystem/d4science-keycloak-themes/src/branch/master/src/utils/xquery > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Thu, Apr 29, 2021 at 3:54 PM Rob > > > > > <private at tjalma.com> > > > > > wrote: > > > > > > > > > > >> Hi, > > > > > > > > > > >> > > > > > > > > > > >> I have a question. > > > > > > > > > > >> Can BaseX make use of an > > > > > Identity Management application like > > > > > Keycloak for Users? > > > > > > > > > > >> > > > > > > > > > > >> I can?t find anything about it > > > > > :) > > > > > > > > > > >> > > > > > > > > > > >> With kind regards, > > > > > > > > > > >> Rob Tjalma > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > End of BaseX-Talk Digest, Vol 136, Issue > > > > > 17 > > > > > > > > > > ******************************************* > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >

On 04/05/21 09:51, Marco Lettere wrote: > > Hi Rob and all, > > I attach here an example of an OIDC > code grant flow implemented with RestXQ, BaseX permission and > error handler. > > The file includes a sort of library > for performing the steps of the OIDC flow plus a minimal > application that is registered as public client inside keycloak > and which is what you should access from your browser by calling > http://localhost:8984/authtest > or http://localhost:8984/authtest/internal. > > > > I've put into it also the logout > procedure for performing the back-channel logout which closes > the SSO session. > > > > > > This is only a resume of a more > generic and complex module but it should be useful as a howto > and it should be as simple to install as copying the file to > your BaseX' webapp folder. Use it as you like. > > Regards, > > Marco. > > > > > > > > On 03/05/21 12:50, Rob wrote: > > > > > > > > Hi Marco, > > > > > > > > > > Got it! > > > > Looking forward to the code! :) > > > > > > > > > > > > With kind regards, > > > > Rob > > > > > > > > > > > Op 3 mei 2021, om 09:23 heeft Marco Lettere > > > <m.lettere at gmail.com> het > > > volgende geschreven: > > > > > > > > > > > > > > > > > > > > > Hi Rob, > > > > > > no the code in the > > > repository the link refers to is more like > > > administrative tooling for batch importing > > > configuration into Keycloak for administration > > > purposes. > > > > > > I'll work on creating an > > > excerpt of the code that realizes Oauth2 code grant > > > flow with RestXQ and Keycloak and I'll share by > > > tonight hopefully. > > > > > > Regards, > > > > > > Marco. > > > > > > > > > > > > > > > > > > > > > > > > On 01/05/21 17:49, Rob > > > wrote: > > > > > > > > > > > > > > > > > > > > Hi all! > > > > > > > > > > > > > > > > > > > > Sorry for the late response! > > > > > > > > I’m reading all the emails now, haha. > > > > > > > > > > > > > > > > > > > > > > > > I’m very happy to hear that it’s > > > > possible, I see you shared the following: > > > > > > > > https://code-repo.d4science.org/gCubeSystem/d4science-keycloak-themes/src/branch/master/src/utils/xquery > > > > > > > > > > > > > > > > > > > > > > > > Thanks for sharing! > > > > > > > > > > > > > > > > > > > > > > > > Based on the following quote from > > > > Marco’s mail: > > > > > > > > "We have also a RestXQ module that > > > > in combination with basex:perm annotations > > > > protects access to a GUI implementing the Oauth2 > > > > Code-grant flow. If Rob is interested we could > > > > share.” > > > > > > > > > > > > > > > > > > > > > > > > > > > > The > > > > link above, is that the RESTXQ module Marco’s > > > > been talking about? > > > > > > > > Or > > > > is there another RESTXQ module? > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > With kind regards, > > > > > > > > Rob > > > > > > > > > > > > > > > > > > > > > > > > > Op 1 mei 2021, om 05:29 heeft > > > > > Adam Law <adamjameslaw at gmail.com> > > > > > het volgende geschreven: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > If Rob isn't interested, I > > > > > certain am... Yes please share > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >>We have also a > > > > > RestXQ module that in combination with > > > > > basex:perm > > > > > > > > > > annotations protects access to a GUI > > > > > implementing the Oauth2 Code-grant > > > > > > > > > > flow. If Rob is interested we could > > > > > share. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Many thanks for sharing https://code-repo.d4science.org/gCubeSystem/d4science-keycloak-themes/src/branch/master/src/utils/xquery > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > This is a bit forward of me, > > > > > but would you consider changing the > > > > > license away from European Union Public > > > > > Licence which appears to be 'copyleft' > > > > > to say BSD 3-Clause, MIT, ... > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Adam > > > > > > > > > > > > > > > > > > > > > > > > > On > > > > > Fri, Apr 30, 2021 at 6:00 PM <basex-talk-request at mailman.uni-konstanz.de> > > > > > wrote: > > > > > > > > > > > > > > > > > > > > > > > > > > Send > > > > > > BaseX-Talk mailing list submissions to > > > > > > > > > > > > basex-talk at mailman.uni-konstanz.de > > > > > > > > > > > > > > > > > > > > > > > > To subscribe or unsubscribe via the > > > > > > World Wide Web, visit > > > > > > > > > > > > https://mailman.uni-konstanz.de/mailman/listinfo/basex-talk > > > > > > > > > > > > or, via email, send a message with > > > > > > subject or body 'help' to > > > > > > > > > > > > basex-talk-request at mailman.uni-konstanz.de > > > > > > > > > > > > > > > > > > > > > > > > You can reach the person managing the > > > > > > list at > > > > > > > > > > > > basex-talk-owner at mailman.uni-konstanz.de > > > > > > > > > > > > > > > > > > > > > > > > When replying, please edit your > > > > > > Subject line so it is more specific > > > > > > > > > > > > than "Re: Contents of BaseX-Talk > > > > > > digest..." > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Today's Topics: > > > > > > > > > > > > > > > > > > > > > > > > 1. Make use of external Identity > > > > > > Management for BaseX (Rob) > > > > > > > > > > > > 2. Re: Reloading jars on a running > > > > > > http server. (Reece Dunn) > > > > > > > > > > > > 3. Getting profile information in > > > > > > server responses. (Reece Dunn) > > > > > > > > > > > > 4. Re: Make use of external > > > > > > Identity Management for BaseX > > > > > > > > > > > > (Christian Gr?n) > > > > > > > > > > > > 5. Re: Reloading jars on a running > > > > > > http server. (Christian Gr?n) > > > > > > > > > > > > 6. Re: Getting profile information > > > > > > in server responses. > > > > > > > > > > > > (Christian Gr?n) > > > > > > > > > > > > 7. Re: Reloading jars on a running > > > > > > http server. (Reece Dunn) > > > > > > > > > > > > 8. Re: Reloading jars on a running > > > > > > http server. (Christian Gr?n) > > > > > > > > > > > > 9. Re: Make use of external > > > > > > Identity Management for BaseX > > > > > > > > > > > > (Marco Lettere) > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ---------------------------------------------------------------------- > > > > > > > > > > > > > > > > > > > > > > > > Message: 1 > > > > > > > > > > > > Date: Thu, 29 Apr 2021 15:54:08 +0200 > > > > > > > > > > > > From: Rob <private at tjalma.com> > > > > > > > > > > > > To: BaseX <basex-talk at mailman.uni-konstanz.de> > > > > > > > > > > > > Subject: [basex-talk] Make use of > > > > > > external Identity Management for > > > > > > > > > > > > BaseX > > > > > > > > > > > > Message-ID: <39036EF3-E67D-470D-B2F4-E6FBFFDF40E6 at tjalma.com> > > > > > > > > > > > > Content-Type: text/plain; > > > > > > charset=utf-8 > > > > > > > > > > > > > > > > > > > > > > > > Hi, > > > > > > > > > > > > > > > > > > > > > > > > I have a question. > > > > > > > > > > > > Can BaseX make use of an Identity > > > > > > Management application like Keycloak > > > > > > for Users? > > > > > > > > > > > > > > > > > > > > > > > > I can?t find anything about it :) > > > > > > > > > > > > > > > > > > > > > > > > With kind regards, > > > > > > > > > > > > Rob Tjalma > > > > > > > > > > > > > > > > > > > > > > > > ------------------------------ > > > > > > > > > > > > > > > > > > > > > > > > Message: 2 > > > > > > > > > > > > Date: Thu, 29 Apr 2021 20:48:09 +0100 > > > > > > > > > > > > From: Reece Dunn <msclrhd at googlemail.com> > > > > > > > > > > > > To: Christian Gr?n <christian.gruen at gmail.com> > > > > > > > > > > > > Cc: BaseX <basex-talk at mailman.uni-konstanz.de> > > > > > > > > > > > > Subject: Re: [basex-talk] Reloading > > > > > > jars on a running http server. > > > > > > > > > > > > Message-ID: > > > > > > > > > > > > <CAGdtn24Qdgbe3=nebYA1je4hCrZVAgi_sercCRxsTxmZcWcAxQ at mail.gmail.com> > > > > > > > > > > > > Content-Type: text/plain; > > > > > > charset="utf-8" > > > > > > > > > > > > > > > > > > > > > > > > Hi Christian, > > > > > > > > > > > > > > > > > > > > > > > > Thanks for the response. > > > > > > Unfortunately, I've not been able to > > > > > > get the > > > > > > > > > > > > reloading working. > > > > > > > > > > > > > > > > > > > > > > > > Kind regards, > > > > > > > > > > > > Reece > > > > > > > > > > > > > > > > > > > > > > > > On Wed, 21 Apr 2021 at 18:49, > > > > > > Christian Gr?n <christian.gruen at gmail.com> > > > > > > > > > > > > wrote: > > > > > > > > > > > > > > > > > > > > > > > > > Hi Reece, > > > > > > > > > > > > > > > > > > > > > > > > > > If you install your Java code as > > > > > > JAR file in the repository [1], the > > > > > > > > > > > > > code will be loaded and unloaded > > > > > > every time when your query is > > > > > > > > > > > > > executed. If you get an error > > > > > > message? > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > java.lang.reflect.InaccessibleObjectException: > > > > > > Unable to make field > > > > > > > > > > > > > private final > > > > > > jdk.internal.loader.URLClassPath > > > > > > > > > > > > > java.net.URLClassLoader.ucp > > > > > > accessible: module java.base does not > > > > > > > > > > > > > "opens java.net" > > > > > > to unnamed module @79e2c065 > > > > > > > > > > > > > > > > > > > > > > > > > > ?unloading fails [2], as you?re > > > > > > probably using a more recent version > > > > > > > > > > > > > of the JDK, which restricts > > > > > > reflective access to internal > > > > > > variables. > > > > > > > > > > > > > You can get around this by adding > > > > > > Java flags at startup time: > > > > > > > > > > > > > > > > > > > > > > > > > > --add-opens java.base/java.net=ALL-UNNAMED > > > > > > > > > > > > > --add-opens > > > > > > java.base/jdk.internal.loader=ALL-UNNAMED > > > > > > > > > > > > > > > > > > > > > > > > > > Maybe there are better solutions > > > > > > to unload JAR files today. > > > > > > > > > > > > > Suggestions are welcome! > > > > > > > > > > > > > > > > > > > > > > > > > > Hope this helps, > > > > > > > > > > > > > Christian > > > > > > > > > > > > > > > > > > > > > > > > > > [1] https://docs.basex.org/wiki/Repository#Java > > > > > > > > > > > > > [2] > > > > > > > > > > > > > https://github.com/BaseXdb/basex/blob/master/basex-core/src/main/java/org/basex/util/JarLoader.java#L34 > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Tue, Apr 20, 2021 at 6:44 PM > > > > > > Reece Dunn <msclrhd at googlemail.com> > > > > > > wrote: > > > > > > > > > > > > > > > > > > > > > > > > > > > > Hi all, > > > > > > > > > > > > > > > > > > > > > > > > > > > > I'm working on a Java class > > > > > > that I'm importing into an XQuery, so > > > > > > I can > > > > > > > > > > > > > do additional processing on the > > > > > > data that isn't easily expressible in > > > > > > > > > > > > > XQuery (or XSLT). In order to get > > > > > > BaseX to pick up a modified version of > > > > > > > > > > > > > the jar file I'm building, I'm > > > > > > restarting the BaseX http server. > > > > > > > > > > > > > > > > > > > > > > > > > > > > This makes it slower to turn > > > > > > around testing the changes. Is there a > > > > > > > > > > > > > better way of doing this? > > > > > > > > > > > > > > > > > > > > > > > > > > > > Kind regards, > > > > > > > > > > > > > > Reece > > > > > > > > > > > > > > > > > > > > > > > > > -------------- next part > > > > > > -------------- > > > > > > > > > > > > An HTML attachment was scrubbed... > > > > > > > > > > > > URL: <http://mailman.uni-konstanz.de/pipermail/basex-talk/attachments/20210429/fba079e2/attachment-0001.htm> > > > > > > > > > > > > > > > > > > > > > > > > ------------------------------ > > > > > > > > > > > > > > > > > > > > > > > > Message: 3 > > > > > > > > > > > > Date: Thu, 29 Apr 2021 20:50:40 +0100 > > > > > > > > > > > > From: Reece Dunn <msclrhd at googlemail.com> > > > > > > > > > > > > To: BaseX <basex-talk at mailman.uni-konstanz.de> > > > > > > > > > > > > Subject: [basex-talk] Getting profile > > > > > > information in server responses. > > > > > > > > > > > > Message-ID: > > > > > > > > > > > > <CAGdtn26mnN7Bu3bqUN8pkS1da4eq2tQstFOnx5nqqEvZPnHdkA at mail.gmail.com> > > > > > > > > > > > > Content-Type: text/plain; > > > > > > charset="utf-8" > > > > > > > > > > > > > > > > > > > > > > > > Hi all, > > > > > > > > > > > > > > > > > > > > > > > > In BaseX, is there a way to get the > > > > > > profile timings (compile, run, print, > > > > > > > > > > > > etc.) in the response of a HTTP > > > > > > request via the Server-Timing header ( > > > > > > > > > > > > https://developer.mozilla.org/en-US/docs/Web/HTTP/Headers/Server-Timing)? > > > > > > > > > > > > > > > > > > > > > > > > Kind regards, > > > > > > > > > > > > Reece > > > > > > > > > > > > -------------- next part > > > > > > -------------- > > > > > > > > > > > > An HTML attachment was scrubbed... > > > > > > > > > > > > URL: <http://mailman.uni-konstanz.de/pipermail/basex-talk/attachments/20210429/12a4d4fa/attachment-0001.htm> > > > > > > > > > > > > > > > > > > > > > > > > ------------------------------ > > > > > > > > > > > > > > > > > > > > > > > > Message: 4 > > > > > > > > > > > > Date: Fri, 30 Apr 2021 08:47:36 +0200 > > > > > > > > > > > > From: Christian Gr?n <christian.gruen at gmail.com> > > > > > > > > > > > > To: Rob <private at tjalma.com> > > > > > > > > > > > > Cc: BaseX <basex-talk at mailman.uni-konstanz.de> > > > > > > > > > > > > Subject: Re: [basex-talk] Make use of > > > > > > external Identity Management for > > > > > > > > > > > > BaseX > > > > > > > > > > > > Message-ID: > > > > > > > > > > > > > > > > > > <CAP94bnP_-nFY6BQv38gqQdy9aoFn_gtRzgM1rW+GB7yjr=xTrA at mail.gmail.com> > > > > > > > > > > > > Content-Type: text/plain; > > > > > > charset="UTF-8" > > > > > > > > > > > > > > > > > > > > > > > > Hi Rob, > > > > > > > > > > > > > > > > > > > > > > > > There is no prepackaged module for > > > > > > Keycloak (at least I?m aware of > > > > > > > > > > > > none), but you can write your own code > > > > > > with XQuery. See [1] for an > > > > > > > > > > > > example how this might look like. > > > > > > > > > > > > > > > > > > > > > > > > Are you using RESTXQ? > > > > > > > > > > > > > > > > > > > > > > > > Best, > > > > > > > > > > > > Christian > > > > > > > > > > > > > > > > > > > > > > > > [1] https://code-repo.d4science.org/gCubeSystem/d4science-keycloak-themes/src/branch/master/src/utils/xquery > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Thu, Apr 29, 2021 at 3:54 PM Rob > > > > > > <private at tjalma.com> > > > > > > wrote: > > > > > > > > > > > > > > > > > > > > > > > > > > Hi, > > > > > > > > > > > > > > > > > > > > > > > > > > I have a question. > > > > > > > > > > > > > Can BaseX make use of an Identity > > > > > > Management application like Keycloak > > > > > > for Users? > > > > > > > > > > > > > > > > > > > > > > > > > > I can?t find anything about it :) > > > > > > > > > > > > > > > > > > > > > > > > > > With kind regards, > > > > > > > > > > > > > Rob Tjalma > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ------------------------------ > > > > > > > > > > > > > > > > > > > > > > > > Message: 5 > > > > > > > > > > > > Date: Fri, 30 Apr 2021 08:48:36 +0200 > > > > > > > > > > > > From: Christian Gr?n <christian.gruen at gmail.com> > > > > > > > > > > > > To: Reece Dunn <msclrhd at googlemail.com> > > > > > > > > > > > > Cc: BaseX <basex-talk at mailman.uni-konstanz.de> > > > > > > > > > > > > Subject: Re: [basex-talk] Reloading > > > > > > jars on a running http server. > > > > > > > > > > > > Message-ID: > > > > > > > > > > > > <CAP94bnNs_gmotGxEa2Mp-fcJzQxiO3HdzLfcG0_KknotrZ6APQ at mail.gmail.com> > > > > > > > > > > > > Content-Type: text/plain; > > > > > > charset="UTF-8" > > > > > > > > > > > > > > > > > > > > > > > > Hi Reece, > > > > > > > > > > > > > > > > > > > > > > > > I?m sorry to hear that. Did you build > > > > > > a custom JAR file, or do you > > > > > > > > > > > > encounter problems with the JDK? > > > > > > > > > > > > > > > > > > > > > > > > Cheers, > > > > > > > > > > > > Christian > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Thu, Apr 29, 2021 at 9:48 PM Reece > > > > > > Dunn <msclrhd at googlemail.com> > > > > > > wrote: > > > > > > > > > > > > > > > > > > > > > > > > > > Hi Christian, > > > > > > > > > > > > > > > > > > > > > > > > > > Thanks for the response. > > > > > > Unfortunately, I've not been able to > > > > > > get the reloading working. > > > > > > > > > > > > > > > > > > > > > > > > > > Kind regards, > > > > > > > > > > > > > Reece > > > > > > > > > > > > > > > > > > > > > > > > > > On Wed, 21 Apr 2021 at 18:49, > > > > > > Christian Gr?n <christian.gruen at gmail.com> > > > > > > wrote: > > > > > > > > > > > > >> > > > > > > > > > > > > >> Hi Reece, > > > > > > > > > > > > >> > > > > > > > > > > > > >> If you install your Java code > > > > > > as JAR file in the repository [1], the > > > > > > > > > > > > >> code will be loaded and > > > > > > unloaded every time when your query is > > > > > > > > > > > > >> executed. If you get an error > > > > > > message? > > > > > > > > > > > > >> > > > > > > > > > > > > >> > > > > > > java.lang.reflect.InaccessibleObjectException: > > > > > > Unable to make field > > > > > > > > > > > > >> private final > > > > > > jdk.internal.loader.URLClassPath > > > > > > > > > > > > >> java.net.URLClassLoader.ucp > > > > > > accessible: module java.base does not > > > > > > > > > > > > >> "opens java.net" > > > > > > to unnamed module @79e2c065 > > > > > > > > > > > > >> > > > > > > > > > > > > >> ?unloading fails [2], as > > > > > > you?re probably using a more recent > > > > > > version > > > > > > > > > > > > >> of the JDK, which restricts > > > > > > reflective access to internal > > > > > > variables. > > > > > > > > > > > > >> You can get around this by > > > > > > adding Java flags at startup time: > > > > > > > > > > > > >> > > > > > > > > > > > > >> --add-opens java.base/java.net=ALL-UNNAMED > > > > > > > > > > > > >> --add-opens > > > > > > java.base/jdk.internal.loader=ALL-UNNAMED > > > > > > > > > > > > >> > > > > > > > > > > > > >> Maybe there are better > > > > > > solutions to unload JAR files today. > > > > > > > > > > > > >> Suggestions are welcome! > > > > > > > > > > > > >> > > > > > > > > > > > > >> Hope this helps, > > > > > > > > > > > > >> Christian > > > > > > > > > > > > >> > > > > > > > > > > > > >> [1] https://docs.basex.org/wiki/Repository#Java > > > > > > > > > > > > >> [2] https://github.com/BaseXdb/basex/blob/master/basex-core/src/main/java/org/basex/util/JarLoader.java#L34 > > > > > > > > > > > > >> > > > > > > > > > > > > >> > > > > > > > > > > > > >> > > > > > > > > > > > > >> On Tue, Apr 20, 2021 at 6:44 > > > > > > PM Reece Dunn <msclrhd at googlemail.com> > > > > > > wrote: > > > > > > > > > > > > >> > > > > > > > > > > > > > >> > Hi all, > > > > > > > > > > > > >> > > > > > > > > > > > > > >> > I'm working on a Java > > > > > > class that I'm importing into an > > > > > > XQuery, so I can do additional > > > > > > processing on the data that isn't > > > > > > easily expressible in XQuery (or > > > > > > XSLT). In order to get BaseX to pick > > > > > > up a modified version of the jar file > > > > > > I'm building, I'm restarting the BaseX > > > > > > http server. > > > > > > > > > > > > >> > > > > > > > > > > > > > >> > This makes it slower to > > > > > > turn around testing the changes. Is > > > > > > there a better way of doing this? > > > > > > > > > > > > >> > > > > > > > > > > > > > >> > Kind regards, > > > > > > > > > > > > >> > Reece > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ------------------------------ > > > > > > > > > > > > > > > > > > > > > > > > Message: 6 > > > > > > > > > > > > Date: Fri, 30 Apr 2021 08:55:49 +0200 > > > > > > > > > > > > From: Christian Gr?n <christian.gruen at gmail.com> > > > > > > > > > > > > To: Reece Dunn <msclrhd at googlemail.com> > > > > > > > > > > > > Cc: BaseX <basex-talk at mailman.uni-konstanz.de> > > > > > > > > > > > > Subject: Re: [basex-talk] Getting > > > > > > profile information in server > > > > > > > > > > > > responses. > > > > > > > > > > > > Message-ID: > > > > > > > > > > > > <CAP94bnMCyZqRYvMEJG7EkON+FjNS0fsGWwx-_2EQrzzYPV-hZQ at mail.gmail.com> > > > > > > > > > > > > Content-Type: text/plain; > > > > > > charset="UTF-8" > > > > > > > > > > > > > > > > > > > > > > > > A good idea; I?ll think of ways to get > > > > > > this included. One challenge > > > > > > > > > > > > might be that the response is streamed > > > > > > to the client. This means that > > > > > > > > > > > > when creating the HTTP request > > > > > > headers, it will not be known yet how > > > > > > > > > > > > long the evaluation will take (and the > > > > > > time for evaluation may also > > > > > > > > > > > > depend on the connection speed). The > > > > > > time for parsing and compiling > > > > > > > > > > > > the query should be known at that > > > > > > time, though. ? Maybe we could > > > > > > > > > > > > suppress result streaming when timings > > > > > > are requested. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Thu, Apr 29, 2021 at 9:50 PM Reece > > > > > > Dunn <msclrhd at googlemail.com> > > > > > > wrote: > > > > > > > > > > > > > > > > > > > > > > > > > > Hi all, > > > > > > > > > > > > > > > > > > > > > > > > > > In BaseX, is there a way to get > > > > > > the profile timings (compile, run, > > > > > > print, etc.) in the response of a HTTP > > > > > > request via the Server-Timing header (https://developer.mozilla.org/en-US/docs/Web/HTTP/Headers/Server-Timing)? > > > > > > > > > > > > > > > > > > > > > > > > > > Kind regards, > > > > > > > > > > > > > Reece > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ------------------------------ > > > > > > > > > > > > > > > > > > > > > > > > Message: 7 > > > > > > > > > > > > Date: Fri, 30 Apr 2021 08:14:21 +0100 > > > > > > > > > > > > From: Reece Dunn <msclrhd at googlemail.com> > > > > > > > > > > > > To: Christian Gr?n <christian.gruen at gmail.com> > > > > > > > > > > > > Cc: BaseX <basex-talk at mailman.uni-konstanz.de> > > > > > > > > > > > > Subject: Re: [basex-talk] Reloading > > > > > > jars on a running http server. > > > > > > > > > > > > Message-ID: > > > > > > > > > > > > > > > > > > <CAGdtn25JU3aGsHZepExgDigQX7asNDOF=2C6PWJcz1kgQqZEfA at mail.gmail.com> > > > > > > > > > > > > Content-Type: text/plain; > > > > > > charset="utf-8" > > > > > > > > > > > > > > > > > > > > > > > > Hi Christian, > > > > > > > > > > > > > > > > > > > > > > > > I'm not seeing any exceptions in the > > > > > > console window, even when enabling the > > > > > > > > > > > > debug setting. I'm using the > > > > > > AdoptOpenJDK 1.8. I also have > > > > > > AdoptOpenJDK 11, > > > > > > > > > > > > but I assume that will have the issue > > > > > > you described. > > > > > > > > > > > > > > > > > > > > > > > > It's a custom-built jar using Kotlin, > > > > > > built via gradle. > > > > > > > > > > > > > > > > > > > > > > > > One thing that it could be is that I'm > > > > > > using Kotlin objects (not classes), > > > > > > > > > > > > e.g.: > > > > > > > > > > > > > > > > > > > > > > > > package test > > > > > > > > > > > > object Test { fun f(): String = > > > > > > "test" } > > > > > > > > > > > > > > > > > > > > > > > > and using it like: > > > > > > > > > > > > > > > > > > > > > > > > declare namespace Test = > > > > > > "java:test.Test"; > > > > > > > > > > > > > > > > > > > > > > > > declare function test:f() as > > > > > > xs:string { > > > > > > > > > > > > Test::f(Test::INSTANCE()) > > > > > > > > > > > > }; > > > > > > > > > > > > > > > > > > > > > > > > The build.gradle file is simple. It > > > > > > looks something like this (removing > > > > > > > > > > > > things like the junit configuration): > > > > > > > > > > > > > > > > > > > > > > > > ----- > > > > > > > > > > > > buildscript { > > > > > > > > > > > > ext.kotlin_version = "1.4.32" > > > > > > > > > > > > ext.kotlin_stdlib = > > > > > > "kotlin-stdlib" > > > > > > > > > > > > ext.java_version = "1.8" > > > > > > > > > > > > > > > > > > > > > > > > repositories { mavenCentral() } > > > > > > > > > > > > dependencies { classpath > > > > > > > > > > > > "org.jetbrains.kotlin:kotlin-gradle-plugin:$kotlin_version" } > > > > > > > > > > > > } > > > > > > > > > > > > > > > > > > > > > > > > apply plugin: 'kotlin' > > > > > > > > > > > > > > > > > > > > > > > > repositories { > > > > > > > > > > > > mavenCentral() > > > > > > > > > > > > mavenLocal() > > > > > > > > > > > > } > > > > > > > > > > > > > > > > > > > > > > > > compileKotlin { kotlinOptions { > > > > > > jvmTarget = java_version } } > > > > > > > > > > > > compileTestKotlin { kotlinOptions { > > > > > > jvmTarget = java_version } } > > > > > > > > > > > > > > > > > > > > > > > > dependencies { > > > > > > > > > > > > implementation > > > > > > "org.jetbrains.kotlin:$kotlin_stdlib:$kotlin_version" > > > > > > > > > > > > } > > > > > > > > > > > > ----- > > > > > > > > > > > > > > > > > > > > > > > > You'll need to copy the > > > > > > kotlin-stdlib-1.4.32.jar file in > > > > > > addition to the > > > > > > > > > > > > test.jar file to BaseX's lib > > > > > > directory. > > > > > > > > > > > > > > > > > > > > > > > > Kind regards, > > > > > > > > > > > > Reece > > > > > > > > > > > > > > > > > > > > > > > > On Fri, 30 Apr 2021 at 07:48, > > > > > > Christian Gr?n <christian.gruen at gmail.com> > > > > > > > > > > > > wrote: > > > > > > > > > > > > > > > > > > > > > > > > > Hi Reece, > > > > > > > > > > > > > > > > > > > > > > > > > > I?m sorry to hear that. Did you > > > > > > build a custom JAR file, or do you > > > > > > > > > > > > > encounter problems with the JDK? > > > > > > > > > > > > > > > > > > > > > > > > > > Cheers, > > > > > > > > > > > > > Christian > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Thu, Apr 29, 2021 at 9:48 PM > > > > > > Reece Dunn <msclrhd at googlemail.com> > > > > > > wrote: > > > > > > > > > > > > > > > > > > > > > > > > > > > > Hi Christian, > > > > > > > > > > > > > > > > > > > > > > > > > > > > Thanks for the response. > > > > > > Unfortunately, I've not been able to > > > > > > get the > > > > > > > > > > > > > reloading working. > > > > > > > > > > > > > > > > > > > > > > > > > > > > Kind regards, > > > > > > > > > > > > > > Reece > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Wed, 21 Apr 2021 at > > > > > > 18:49, Christian Gr?n <christian.gruen at gmail.com> > > > > > > > > > > > > > wrote: > > > > > > > > > > > > > >> > > > > > > > > > > > > > >> Hi Reece, > > > > > > > > > > > > > >> > > > > > > > > > > > > > >> If you install your Java > > > > > > code as JAR file in the repository > > > > > > [1], the > > > > > > > > > > > > > >> code will be loaded and > > > > > > unloaded every time when your query is > > > > > > > > > > > > > >> executed. If you get an > > > > > > error message? > > > > > > > > > > > > > >> > > > > > > > > > > > > > >> > > > > > > java.lang.reflect.InaccessibleObjectException: > > > > > > Unable to make field > > > > > > > > > > > > > >> private final > > > > > > jdk.internal.loader.URLClassPath > > > > > > > > > > > > > >> > > > > > > java.net.URLClassLoader.ucp > > > > > > accessible: module java.base does not > > > > > > > > > > > > > >> "opens java.net" > > > > > > to unnamed module @79e2c065 > > > > > > > > > > > > > >> > > > > > > > > > > > > > >> ?unloading fails [2], as > > > > > > you?re probably using a more recent > > > > > > version > > > > > > > > > > > > > >> of the JDK, which > > > > > > restricts reflective access to > > > > > > internal variables. > > > > > > > > > > > > > >> You can get around this > > > > > > by adding Java flags at startup time: > > > > > > > > > > > > > >> > > > > > > > > > > > > > >> --add-opens java.base/java.net=ALL-UNNAMED > > > > > > > > > > > > > >> --add-opens > > > > > > java.base/jdk.internal.loader=ALL-UNNAMED > > > > > > > > > > > > > >> > > > > > > > > > > > > > >> Maybe there are better > > > > > > solutions to unload JAR files today. > > > > > > > > > > > > > >> Suggestions are welcome! > > > > > > > > > > > > > >> > > > > > > > > > > > > > >> Hope this helps, > > > > > > > > > > > > > >> Christian > > > > > > > > > > > > > >> > > > > > > > > > > > > > >> [1] https://docs.basex.org/wiki/Repository#Java > > > > > > > > > > > > > >> [2] > > > > > > > > > > > > > https://github.com/BaseXdb/basex/blob/master/basex-core/src/main/java/org/basex/util/JarLoader.java#L34 > > > > > > > > > > > > > >> > > > > > > > > > > > > > >> > > > > > > > > > > > > > >> > > > > > > > > > > > > > >> On Tue, Apr 20, 2021 at > > > > > > 6:44 PM Reece Dunn <msclrhd at googlemail.com> > > > > > > > > > > > > > wrote: > > > > > > > > > > > > > >> > > > > > > > > > > > > > > >> > Hi all, > > > > > > > > > > > > > >> > > > > > > > > > > > > > > >> > I'm working on a > > > > > > Java class that I'm importing into an > > > > > > XQuery, so I > > > > > > > > > > > > > can do additional processing on > > > > > > the data that isn't easily expressible > > > > > > in > > > > > > > > > > > > > XQuery (or XSLT). In order to get > > > > > > BaseX to pick up a modified version of > > > > > > > > > > > > > the jar file I'm building, I'm > > > > > > restarting the BaseX http server. > > > > > > > > > > > > > >> > > > > > > > > > > > > > > >> > This makes it > > > > > > slower to turn around testing the > > > > > > changes. Is there a > > > > > > > > > > > > > better way of doing this? > > > > > > > > > > > > > >> > > > > > > > > > > > > > > >> > Kind regards, > > > > > > > > > > > > > >> > Reece > > > > > > > > > > > > > > > > > > > > > > > > > -------------- next part > > > > > > -------------- > > > > > > > > > > > > An HTML attachment was scrubbed... > > > > > > > > > > > > URL: <http://mailman.uni-konstanz.de/pipermail/basex-talk/attachments/20210430/1b9943e9/attachment-0001.htm> > > > > > > > > > > > > > > > > > > > > > > > > ------------------------------ > > > > > > > > > > > > > > > > > > > > > > > > Message: 8 > > > > > > > > > > > > Date: Fri, 30 Apr 2021 09:30:17 +0200 > > > > > > > > > > > > From: Christian Gr?n <christian.gruen at gmail.com> > > > > > > > > > > > > To: Reece Dunn <msclrhd at googlemail.com> > > > > > > > > > > > > Cc: BaseX <basex-talk at mailman.uni-konstanz.de> > > > > > > > > > > > > Subject: Re: [basex-talk] Reloading > > > > > > jars on a running http server. > > > > > > > > > > > > Message-ID: > > > > > > > > > > > > > > > > > > <CAP94bnN5QnMVBoaNzAL8WOuUo7N8MDYbM4+z=3fTqdn_eUVyZg at mail.gmail.com> > > > > > > > > > > > > Content-Type: text/plain; > > > > > > charset="UTF-8" > > > > > > > > > > > > > > > > > > > > > > > > Hi Reece, > > > > > > > > > > > > > > > > > > > > > > > > > You'll need to copy the > > > > > > kotlin-stdlib-1.4.32.jar file in > > > > > > addition to the test.jar file to > > > > > > BaseX's lib directory. > > > > > > > > > > > > > > > > > > > > > > > > Please note that JAR libraries will > > > > > > only be unregistered after query > > > > > > > > > > > > evalution if they are moved into the > > > > > > repo directory. If a library is > > > > > > > > > > > > copied into the lib directory, it will > > > > > > be added to the static > > > > > > > > > > > > classpath. > > > > > > > > > > > > > > > > > > > > > > > > In the given case, you could probably > > > > > > keep kotlin-stdlib-1.4.32.jar in > > > > > > > > > > > > the lib directory, but you?ll need to > > > > > > keep your development code in > > > > > > > > > > > > the repository (as described in the > > > > > > Wiki). It?s no problem, though, to > > > > > > > > > > > > directly modify the repo code (you > > > > > > don?t have to use REPO INSTALL or > > > > > > > > > > > > repo:install for that). > > > > > > > > > > > > > > > > > > > > > > > > If the problem persists, feel free to > > > > > > send me a little test.jar, I can > > > > > > > > > > > > then do further testing. > > > > > > > > > > > > > > > > > > > > > > > > Hope this helps, > > > > > > > > > > > > Christian > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Fri, Apr 30, 2021 at 9:14 AM Reece > > > > > > Dunn <msclrhd at googlemail.com> > > > > > > wrote: > > > > > > > > > > > > > > > > > > > > > > > > > > Hi Christian, > > > > > > > > > > > > > > > > > > > > > > > > > > I'm not seeing any exceptions in > > > > > > the console window, even when enabling > > > > > > the debug setting. I'm using the > > > > > > AdoptOpenJDK 1.8. I also have > > > > > > AdoptOpenJDK 11, but I assume that > > > > > > will have the issue you described. > > > > > > > > > > > > > > > > > > > > > > > > > > It's a custom-built jar using > > > > > > Kotlin, built via gradle. > > > > > > > > > > > > > > > > > > > > > > > > > > One thing that it could be is > > > > > > that I'm using Kotlin objects (not > > > > > > classes), e.g.: > > > > > > > > > > > > > > > > > > > > > > > > > > package test > > > > > > > > > > > > > object Test { fun f(): String > > > > > > = "test" } > > > > > > > > > > > > > > > > > > > > > > > > > > and using it like: > > > > > > > > > > > > > > > > > > > > > > > > > > declare namespace Test = > > > > > > "java:test.Test"; > > > > > > > > > > > > > > > > > > > > > > > > > > declare function test:f() as > > > > > > xs:string { > > > > > > > > > > > > > Test::f(Test::INSTANCE()) > > > > > > > > > > > > > }; > > > > > > > > > > > > > > > > > > > > > > > > > > The build.gradle file is simple. > > > > > > It looks something like this (removing > > > > > > things like the junit configuration): > > > > > > > > > > > > > > > > > > > > > > > > > > ----- > > > > > > > > > > > > > buildscript { > > > > > > > > > > > > > ext.kotlin_version = "1.4.32" > > > > > > > > > > > > > ext.kotlin_stdlib = > > > > > > "kotlin-stdlib" > > > > > > > > > > > > > ext.java_version = "1.8" > > > > > > > > > > > > > > > > > > > > > > > > > > repositories { mavenCentral() > > > > > > } > > > > > > > > > > > > > dependencies { classpath > > > > > > "org.jetbrains.kotlin:kotlin-gradle-plugin:$kotlin_version" > > > > > > } > > > > > > > > > > > > > } > > > > > > > > > > > > > > > > > > > > > > > > > > apply plugin: 'kotlin' > > > > > > > > > > > > > > > > > > > > > > > > > > repositories { > > > > > > > > > > > > > mavenCentral() > > > > > > > > > > > > > mavenLocal() > > > > > > > > > > > > > } > > > > > > > > > > > > > > > > > > > > > > > > > > compileKotlin { kotlinOptions { > > > > > > jvmTarget = java_version } } > > > > > > > > > > > > > compileTestKotlin { kotlinOptions > > > > > > { jvmTarget = java_version } } > > > > > > > > > > > > > > > > > > > > > > > > > > dependencies { > > > > > > > > > > > > > implementation > > > > > > "org.jetbrains.kotlin:$kotlin_stdlib:$kotlin_version" > > > > > > > > > > > > > } > > > > > > > > > > > > > ----- > > > > > > > > > > > > > > > > > > > > > > > > > > You'll need to copy the > > > > > > kotlin-stdlib-1.4.32.jar file in > > > > > > addition to the test.jar file to > > > > > > BaseX's lib directory. > > > > > > > > > > > > > > > > > > > > > > > > > > Kind regards, > > > > > > > > > > > > > Reece > > > > > > > > > > > > > > > > > > > > > > > > > > On Fri, 30 Apr 2021 at 07:48, > > > > > > Christian Gr?n <christian.gruen at gmail.com> > > > > > > wrote: > > > > > > > > > > > > >> > > > > > > > > > > > > >> Hi Reece, > > > > > > > > > > > > >> > > > > > > > > > > > > >> I?m sorry to hear that. Did > > > > > > you build a custom JAR file, or do you > > > > > > > > > > > > >> encounter problems with the > > > > > > JDK? > > > > > > > > > > > > >> > > > > > > > > > > > > >> Cheers, > > > > > > > > > > > > >> Christian > > > > > > > > > > > > >> > > > > > > > > > > > > >> > > > > > > > > > > > > >> > > > > > > > > > > > > >> On Thu, Apr 29, 2021 at 9:48 > > > > > > PM Reece Dunn <msclrhd at googlemail.com> > > > > > > wrote: > > > > > > > > > > > > >> > > > > > > > > > > > > > >> > Hi Christian, > > > > > > > > > > > > >> > > > > > > > > > > > > > >> > Thanks for the response. > > > > > > Unfortunately, I've not been able to > > > > > > get the reloading working. > > > > > > > > > > > > >> > > > > > > > > > > > > > >> > Kind regards, > > > > > > > > > > > > >> > Reece > > > > > > > > > > > > >> > > > > > > > > > > > > > >> > On Wed, 21 Apr 2021 at > > > > > > 18:49, Christian Gr?n <christian.gruen at gmail.com> > > > > > > wrote: > > > > > > > > > > > > >> >> > > > > > > > > > > > > >> >> Hi Reece, > > > > > > > > > > > > >> >> > > > > > > > > > > > > >> >> If you install your > > > > > > Java code as JAR file in the > > > > > > repository [1], the > > > > > > > > > > > > >> >> code will be loaded > > > > > > and unloaded every time when your > > > > > > query is > > > > > > > > > > > > >> >> executed. If you get > > > > > > an error message? > > > > > > > > > > > > >> >> > > > > > > > > > > > > >> >> > > > > > > java.lang.reflect.InaccessibleObjectException: > > > > > > Unable to make field > > > > > > > > > > > > >> >> private final > > > > > > jdk.internal.loader.URLClassPath > > > > > > > > > > > > >> >> > > > > > > java.net.URLClassLoader.ucp > > > > > > accessible: module java.base does not > > > > > > > > > > > > >> >> "opens java.net" > > > > > > to unnamed module @79e2c065 > > > > > > > > > > > > >> >> > > > > > > > > > > > > >> >> ?unloading fails > > > > > > [2], as you?re probably using a more > > > > > > recent version > > > > > > > > > > > > >> >> of the JDK, which > > > > > > restricts reflective access to > > > > > > internal variables. > > > > > > > > > > > > >> >> You can get around > > > > > > this by adding Java flags at startup > > > > > > time: > > > > > > > > > > > > >> >> > > > > > > > > > > > > >> >> --add-opens > > > > > > java.base/java.net=ALL-UNNAMED > > > > > > > > > > > > >> >> --add-opens > > > > > > java.base/jdk.internal.loader=ALL-UNNAMED > > > > > > > > > > > > >> >> > > > > > > > > > > > > >> >> Maybe there are > > > > > > better solutions to unload JAR files > > > > > > today. > > > > > > > > > > > > >> >> Suggestions are > > > > > > welcome! > > > > > > > > > > > > >> >> > > > > > > > > > > > > >> >> Hope this helps, > > > > > > > > > > > > >> >> Christian > > > > > > > > > > > > >> >> > > > > > > > > > > > > >> >> [1] https://docs.basex.org/wiki/Repository#Java > > > > > > > > > > > > >> >> [2] https://github.com/BaseXdb/basex/blob/master/basex-core/src/main/java/org/basex/util/JarLoader.java#L34 > > > > > > > > > > > > >> >> > > > > > > > > > > > > >> >> > > > > > > > > > > > > >> >> > > > > > > > > > > > > >> >> On Tue, Apr 20, 2021 > > > > > > at 6:44 PM Reece Dunn <msclrhd at googlemail.com> > > > > > > wrote: > > > > > > > > > > > > >> >> > > > > > > > > > > > > > >> >> > Hi all, > > > > > > > > > > > > >> >> > > > > > > > > > > > > > >> >> > I'm working on > > > > > > a Java class that I'm importing into > > > > > > an XQuery, so I can do additional > > > > > > processing on the data that isn't > > > > > > easily expressible in XQuery (or > > > > > > XSLT). In order to get BaseX to pick > > > > > > up a modified version of the jar file > > > > > > I'm building, I'm restarting the BaseX > > > > > > http server. > > > > > > > > > > > > >> >> > > > > > > > > > > > > > >> >> > This makes it > > > > > > slower to turn around testing the > > > > > > changes. Is there a better way of > > > > > > doing this? > > > > > > > > > > > > >> >> > > > > > > > > > > > > > >> >> > Kind regards, > > > > > > > > > > > > >> >> > Reece > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ------------------------------ > > > > > > > > > > > > > > > > > > > > > > > > Message: 9 > > > > > > > > > > > > Date: Fri, 30 Apr 2021 09:37:14 +0200 > > > > > > > > > > > > From: Marco Lettere <m.lettere at gmail.com> > > > > > > > > > > > > To: basex-talk at mailman.uni-konstanz.de > > > > > > > > > > > > Subject: Re: [basex-talk] Make use of > > > > > > external Identity Management for > > > > > > > > > > > > BaseX > > > > > > > > > > > > Message-ID: <1a8d807b-9cb3-3cd4-f1b7-22aff5446154 at gmail.com> > > > > > > > > > > > > Content-Type: text/plain; > > > > > > charset=utf-8; format=flowed > > > > > > > > > > > > > > > > > > > > > > > > Hi Christian and Rob, > > > > > > > > > > > > as the authors of the code you point > > > > > > to we confirm that interacting with > > > > > > > > > > > > Keycloak in XQuery and in particular > > > > > > RestXQ is rather comfortable. > > > > > > > > > > > > That example is mostly a demonstration > > > > > > code for a tool that scrapes a > > > > > > > > > > > > site index and registers sites named > > > > > > gateways as public clients (in > > > > > > > > > > > > Oauth2 sense) into a Keycloak > > > > > > instance. > > > > > > > > > > > > It is a proof of concept (as you can > > > > > > see from the credentials? :-D) that > > > > > > > > > > > > has been used as a batch one-time > > > > > > migration in a particular setting. > > > > > > > > > > > > > > > > > > > > > > > > We have also a RestXQ module that in > > > > > > combination with basex:perm > > > > > > > > > > > > annotations protects access to a GUI > > > > > > implementing the Oauth2 Code-grant > > > > > > > > > > > > flow. If Rob is interested we could > > > > > > share. > > > > > > > > > > > > > > > > > > > > > > > > If there should be any plan of > > > > > > integrating Oauth2/OIDC flows more > > > > > > > > > > > > tightly into BaseX we could also be > > > > > > available for helping out. > > > > > > > > > > > > > > > > > > > > > > > > Regards, > > > > > > > > > > > > Marco. > > > > > > > > > > > > > > > > > > > > > > > > On 30/04/21 08:47, Christian Gr?n > > > > > > wrote: > > > > > > > > > > > > > Hi Rob, > > > > > > > > > > > > > > > > > > > > > > > > > > There is no prepackaged module > > > > > > for Keycloak (at least I?m aware of > > > > > > > > > > > > > none), but you can write your own > > > > > > code with XQuery. See [1] for an > > > > > > > > > > > > > example how this might look like. > > > > > > > > > > > > > > > > > > > > > > > > > > Are you using RESTXQ? > > > > > > > > > > > > > > > > > > > > > > > > > > Best, > > > > > > > > > > > > > Christian > > > > > > > > > > > > > > > > > > > > > > > > > > [1] https://code-repo.d4science.org/gCubeSystem/d4science-keycloak-themes/src/branch/master/src/utils/xquery > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Thu, Apr 29, 2021 at 3:54 PM > > > > > > Rob <private at tjalma.com> > > > > > > wrote: > > > > > > > > > > > > >> Hi, > > > > > > > > > > > > >> > > > > > > > > > > > > >> I have a question. > > > > > > > > > > > > >> Can BaseX make use of an > > > > > > Identity Management application like > > > > > > Keycloak for Users? > > > > > > > > > > > > >> > > > > > > > > > > > > >> I can?t find anything about > > > > > > it :) > > > > > > > > > > > > >> > > > > > > > > > > > > >> With kind regards, > > > > > > > > > > > > >> Rob Tjalma > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > End of BaseX-Talk Digest, Vol 136, > > > > > > Issue 17 > > > > > > > > > > > > ******************************************* > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >

> Op 4 mei 2021, om 09:53 heeft Marco Lettere <m.lettere at gmail.com> het volgende geschreven: > > > > > > > Forgot to mention that for decoding the > JWT we needed to hook up Java's internal B64 decoder because I > don't remember why the one provided with basex was not able to > handle that encoding. > > > > > > > > On 04/05/21 09:51, Marco Lettere wrote: > > > > > > > > Hi Rob and all, > > > > I attach here an example of an OIDC > > code grant flow implemented with RestXQ, BaseX permission and > > error handler. > > > > The file includes a sort of library > > for performing the steps of the OIDC flow plus a minimal > > application that is registered as public client inside keycloak > > and which is what you should access from your browser by calling > > http://localhost:8984/authtest > > or http://localhost:8984/authtest/internal. > > > > > > > > I've put into it also the logout > > procedure for performing the back-channel logout which closes > > the SSO session. > > > > > > > > > > > > This is only a resume of a more > > generic and complex module but it should be useful as a howto > > and it should be as simple to install as copying the file to > > your BaseX' webapp folder. Use it as you like. > > > > Regards, > > > > Marco. > > > > > > > > > > > > > > > > On 03/05/21 12:50, Rob wrote: > > > > > > > > > > > > > > Hi Marco, > > > > > > > > > > > > > > > Got it! > > > > > > Looking forward to the code! :) > > > > > > > > > > > > > > > > > > With kind regards, > > > > > > Rob > > > > > > > > > > > > > > > > Op 3 mei 2021, om 09:23 heeft Marco Lettere > > > > <m.lettere at gmail.com> het > > > > volgende geschreven: > > > > > > > > > > > > > > > > > > > > > > > > > > > > Hi Rob, > > > > > > > > no the code in the > > > > repository the link refers to is more like > > > > administrative tooling for batch importing > > > > configuration into Keycloak for administration > > > > purposes. > > > > > > > > I'll work on creating an > > > > excerpt of the code that realizes Oauth2 code grant > > > > flow with RestXQ and Keycloak and I'll share by > > > > tonight hopefully. > > > > > > > > Regards, > > > > > > > > Marco. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On 01/05/21 17:49, Rob > > > > wrote: > > > > > > > > > > > > > > > > > > > > > > > > > > Hi all! > > > > > > > > > > > > > > > > > > > > > > > > > Sorry for the late response! > > > > > > > > > > I’m reading all the emails now, haha. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > I’m very happy to hear that it’s > > > > > possible, I see you shared the following: > > > > > > > > > > https://code-repo.d4science.org/gCubeSystem/d4science-keycloak-themes/src/branch/master/src/utils/xquery > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Thanks for sharing! > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Based on the following quote from > > > > > Marco’s mail: > > > > > > > > > > "We have also a RestXQ module that > > > > > in combination with basex:perm annotations > > > > > protects access to a GUI implementing the Oauth2 > > > > > Code-grant flow. If Rob is interested we could > > > > > share.” > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > The > > > > > link above, is that the RESTXQ module Marco’s > > > > > been talking about? > > > > > > > > > > Or > > > > > is there another RESTXQ module? > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > With kind regards, > > > > > > > > > > Rob > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Op 1 mei 2021, om 05:29 heeft > > > > > > Adam Law <adamjameslaw at gmail.com> > > > > > > het volgende geschreven: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > If Rob isn't interested, I > > > > > > certain am... Yes please share > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >>We have also a > > > > > > RestXQ module that in combination with > > > > > > basex:perm > > > > > > > > > > > > annotations protects access to a GUI > > > > > > implementing the Oauth2 Code-grant > > > > > > > > > > > > flow. If Rob is interested we could > > > > > > share. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Many thanks for sharing https://code-repo.d4science.org/gCubeSystem/d4science-keycloak-themes/src/branch/master/src/utils/xquery > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > This is a bit forward of me, > > > > > > but would you consider changing the > > > > > > license away from European Union Public > > > > > > Licence which appears to be 'copyleft' > > > > > > to say BSD 3-Clause, MIT, ... > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Adam > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On > > > > > > Fri, Apr 30, 2021 at 6:00 PM <basex-talk-request at mailman.uni-konstanz.de> > > > > > > wrote: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Send > > > > > > > BaseX-Talk mailing list submissions to > > > > > > > > > > > > > > basex-talk at mailman.uni-konstanz.de > > > > > > > > > > > > > > > > > > > > > > > > > > > > To subscribe or unsubscribe via the > > > > > > > World Wide Web, visit > > > > > > > > > > > > > > https://mailman.uni-konstanz.de/mailman/listinfo/basex-talk > > > > > > > > > > > > > > or, via email, send a message with > > > > > > > subject or body 'help' to > > > > > > > > > > > > > > basex-talk-request at mailman.uni-konstanz.de > > > > > > > > > > > > > > > > > > > > > > > > > > > > You can reach the person managing the > > > > > > > list at > > > > > > > > > > > > > > basex-talk-owner at mailman.uni-konstanz.de > > > > > > > > > > > > > > > > > > > > > > > > > > > > When replying, please edit your > > > > > > > Subject line so it is more specific > > > > > > > > > > > > > > than "Re: Contents of BaseX-Talk > > > > > > > digest..." > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Today's Topics: > > > > > > > > > > > > > > > > > > > > > > > > > > > > 1. Make use of external Identity > > > > > > > Management for BaseX (Rob) > > > > > > > > > > > > > > 2. Re: Reloading jars on a running > > > > > > > http server. (Reece Dunn) > > > > > > > > > > > > > > 3. Getting profile information in > > > > > > > server responses. (Reece Dunn) > > > > > > > > > > > > > > 4. Re: Make use of external > > > > > > > Identity Management for BaseX > > > > > > > > > > > > > > (Christian Gr?n) > > > > > > > > > > > > > > 5. Re: Reloading jars on a running > > > > > > > http server. (Christian Gr?n) > > > > > > > > > > > > > > 6. Re: Getting profile information > > > > > > > in server responses. > > > > > > > > > > > > > > (Christian Gr?n) > > > > > > > > > > > > > > 7. Re: Reloading jars on a running > > > > > > > http server. (Reece Dunn) > > > > > > > > > > > > > > 8. Re: Reloading jars on a running > > > > > > > http server. (Christian Gr?n) > > > > > > > > > > > > > > 9. Re: Make use of external > > > > > > > Identity Management for BaseX > > > > > > > > > > > > > > (Marco Lettere) > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ---------------------------------------------------------------------- > > > > > > > > > > > > > > > > > > > > > > > > > > > > Message: 1 > > > > > > > > > > > > > > Date: Thu, 29 Apr 2021 15:54:08 +0200 > > > > > > > > > > > > > > From: Rob <private at tjalma.com> > > > > > > > > > > > > > > To: BaseX <basex-talk at mailman.uni-konstanz.de> > > > > > > > > > > > > > > Subject: [basex-talk] Make use of > > > > > > > external Identity Management for > > > > > > > > > > > > > > BaseX > > > > > > > > > > > > > > Message-ID: <39036EF3-E67D-470D-B2F4-E6FBFFDF40E6 at tjalma.com> > > > > > > > > > > > > > > Content-Type: text/plain; > > > > > > > charset=utf-8 > > > > > > > > > > > > > > > > > > > > > > > > > > > > Hi, > > > > > > > > > > > > > > > > > > > > > > > > > > > > I have a question. > > > > > > > > > > > > > > Can BaseX make use of an Identity > > > > > > > Management application like Keycloak > > > > > > > for Users? > > > > > > > > > > > > > > > > > > > > > > > > > > > > I can?t find anything about it :) > > > > > > > > > > > > > > > > > > > > > > > > > > > > With kind regards, > > > > > > > > > > > > > > Rob Tjalma > > > > > > > > > > > > > > > > > > > > > > > > > > > > ------------------------------ > > > > > > > > > > > > > > > > > > > > > > > > > > > > Message: 2 > > > > > > > > > > > > > > Date: Thu, 29 Apr 2021 20:48:09 +0100 > > > > > > > > > > > > > > From: Reece Dunn <msclrhd at googlemail.com> > > > > > > > > > > > > > > To: Christian Gr?n <christian.gruen at gmail.com> > > > > > > > > > > > > > > Cc: BaseX <basex-talk at mailman.uni-konstanz.de> > > > > > > > > > > > > > > Subject: Re: [basex-talk] Reloading > > > > > > > jars on a running http server. > > > > > > > > > > > > > > Message-ID: > > > > > > > > > > > > > > <CAGdtn24Qdgbe3=nebYA1je4hCrZVAgi_sercCRxsTxmZcWcAxQ at mail.gmail.com> > > > > > > > > > > > > > > Content-Type: text/plain; > > > > > > > charset="utf-8" > > > > > > > > > > > > > > > > > > > > > > > > > > > > Hi Christian, > > > > > > > > > > > > > > > > > > > > > > > > > > > > Thanks for the response. > > > > > > > Unfortunately, I've not been able to > > > > > > > get the > > > > > > > > > > > > > > reloading working. > > > > > > > > > > > > > > > > > > > > > > > > > > > > Kind regards, > > > > > > > > > > > > > > Reece > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Wed, 21 Apr 2021 at 18:49, > > > > > > > Christian Gr?n <christian.gruen at gmail.com> > > > > > > > > > > > > > > wrote: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Hi Reece, > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > If you install your Java code as > > > > > > > JAR file in the repository [1], the > > > > > > > > > > > > > > > code will be loaded and unloaded > > > > > > > every time when your query is > > > > > > > > > > > > > > > executed. If you get an error > > > > > > > message? > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > java.lang.reflect.InaccessibleObjectException: > > > > > > > Unable to make field > > > > > > > > > > > > > > > private final > > > > > > > jdk.internal.loader.URLClassPath > > > > > > > > > > > > > > > java.net.URLClassLoader.ucp > > > > > > > accessible: module java.base does not > > > > > > > > > > > > > > > "opens java.net" > > > > > > > to unnamed module @79e2c065 > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ?unloading fails [2], as you?re > > > > > > > probably using a more recent version > > > > > > > > > > > > > > > of the JDK, which restricts > > > > > > > reflective access to internal > > > > > > > variables. > > > > > > > > > > > > > > > You can get around this by adding > > > > > > > Java flags at startup time: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > --add-opens java.base/java.net=ALL-UNNAMED > > > > > > > > > > > > > > > --add-opens > > > > > > > java.base/jdk.internal.loader=ALL-UNNAMED > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Maybe there are better solutions > > > > > > > to unload JAR files today. > > > > > > > > > > > > > > > Suggestions are welcome! > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Hope this helps, > > > > > > > > > > > > > > > Christian > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > [1] https://docs.basex.org/wiki/Repository#Java > > > > > > > > > > > > > > > [2] > > > > > > > > > > > > > > > https://github.com/BaseXdb/basex/blob/master/basex-core/src/main/java/org/basex/util/JarLoader.java#L34 > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Tue, Apr 20, 2021 at 6:44 PM > > > > > > > Reece Dunn <msclrhd at googlemail.com> > > > > > > > wrote: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Hi all, > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > I'm working on a Java class > > > > > > > that I'm importing into an XQuery, so > > > > > > > I can > > > > > > > > > > > > > > > do additional processing on the > > > > > > > data that isn't easily expressible in > > > > > > > > > > > > > > > XQuery (or XSLT). In order to get > > > > > > > BaseX to pick up a modified version of > > > > > > > > > > > > > > > the jar file I'm building, I'm > > > > > > > restarting the BaseX http server. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > This makes it slower to turn > > > > > > > around testing the changes. Is there a > > > > > > > > > > > > > > > better way of doing this? > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Kind regards, > > > > > > > > > > > > > > > > Reece > > > > > > > > > > > > > > > > > > > > > > > > > > > > > -------------- next part > > > > > > > -------------- > > > > > > > > > > > > > > An HTML attachment was scrubbed... > > > > > > > > > > > > > > URL: <http://mailman.uni-konstanz.de/pipermail/basex-talk/attachments/20210429/fba079e2/attachment-0001.htm> > > > > > > > > > > > > > > > > > > > > > > > > > > > > ------------------------------ > > > > > > > > > > > > > > > > > > > > > > > > > > > > Message: 3 > > > > > > > > > > > > > > Date: Thu, 29 Apr 2021 20:50:40 +0100 > > > > > > > > > > > > > > From: Reece Dunn <msclrhd at googlemail.com> > > > > > > > > > > > > > > To: BaseX <basex-talk at mailman.uni-konstanz.de> > > > > > > > > > > > > > > Subject: [basex-talk] Getting profile > > > > > > > information in server responses. > > > > > > > > > > > > > > Message-ID: > > > > > > > > > > > > > > <CAGdtn26mnN7Bu3bqUN8pkS1da4eq2tQstFOnx5nqqEvZPnHdkA at mail.gmail.com> > > > > > > > > > > > > > > Content-Type: text/plain; > > > > > > > charset="utf-8" > > > > > > > > > > > > > > > > > > > > > > > > > > > > Hi all, > > > > > > > > > > > > > > > > > > > > > > > > > > > > In BaseX, is there a way to get the > > > > > > > profile timings (compile, run, print, > > > > > > > > > > > > > > etc.) in the response of a HTTP > > > > > > > request via the Server-Timing header ( > > > > > > > > > > > > > > https://developer.mozilla.org/en-US/docs/Web/HTTP/Headers/Server-Timing)? > > > > > > > > > > > > > > > > > > > > > > > > > > > > Kind regards, > > > > > > > > > > > > > > Reece > > > > > > > > > > > > > > -------------- next part > > > > > > > -------------- > > > > > > > > > > > > > > An HTML attachment was scrubbed... > > > > > > > > > > > > > > URL: <http://mailman.uni-konstanz.de/pipermail/basex-talk/attachments/20210429/12a4d4fa/attachment-0001.htm> > > > > > > > > > > > > > > > > > > > > > > > > > > > > ------------------------------ > > > > > > > > > > > > > > > > > > > > > > > > > > > > Message: 4 > > > > > > > > > > > > > > Date: Fri, 30 Apr 2021 08:47:36 +0200 > > > > > > > > > > > > > > From: Christian Gr?n <christian.gruen at gmail.com> > > > > > > > > > > > > > > To: Rob <private at tjalma.com> > > > > > > > > > > > > > > Cc: BaseX <basex-talk at mailman.uni-konstanz.de> > > > > > > > > > > > > > > Subject: Re: [basex-talk] Make use of > > > > > > > external Identity Management for > > > > > > > > > > > > > > BaseX > > > > > > > > > > > > > > Message-ID: > > > > > > > > > > > > > > > > > > > > > <CAP94bnP_-nFY6BQv38gqQdy9aoFn_gtRzgM1rW+GB7yjr=xTrA at mail.gmail.com> > > > > > > > > > > > > > > Content-Type: text/plain; > > > > > > > charset="UTF-8" > > > > > > > > > > > > > > > > > > > > > > > > > > > > Hi Rob, > > > > > > > > > > > > > > > > > > > > > > > > > > > > There is no prepackaged module for > > > > > > > Keycloak (at least I?m aware of > > > > > > > > > > > > > > none), but you can write your own code > > > > > > > with XQuery. See [1] for an > > > > > > > > > > > > > > example how this might look like. > > > > > > > > > > > > > > > > > > > > > > > > > > > > Are you using RESTXQ? > > > > > > > > > > > > > > > > > > > > > > > > > > > > Best, > > > > > > > > > > > > > > Christian > > > > > > > > > > > > > > > > > > > > > > > > > > > > [1] https://code-repo.d4science.org/gCubeSystem/d4science-keycloak-themes/src/branch/master/src/utils/xquery > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Thu, Apr 29, 2021 at 3:54 PM Rob > > > > > > > <private at tjalma.com> > > > > > > > wrote: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Hi, > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > I have a question. > > > > > > > > > > > > > > > Can BaseX make use of an Identity > > > > > > > Management application like Keycloak > > > > > > > for Users? > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > I can?t find anything about it :) > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > With kind regards, > > > > > > > > > > > > > > > Rob Tjalma > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ------------------------------ > > > > > > > > > > > > > > > > > > > > > > > > > > > > Message: 5 > > > > > > > > > > > > > > Date: Fri, 30 Apr 2021 08:48:36 +0200 > > > > > > > > > > > > > > From: Christian Gr?n <christian.gruen at gmail.com> > > > > > > > > > > > > > > To: Reece Dunn <msclrhd at googlemail.com> > > > > > > > > > > > > > > Cc: BaseX <basex-talk at mailman.uni-konstanz.de> > > > > > > > > > > > > > > Subject: Re: [basex-talk] Reloading > > > > > > > jars on a running http server. > > > > > > > > > > > > > > Message-ID: > > > > > > > > > > > > > > <CAP94bnNs_gmotGxEa2Mp-fcJzQxiO3HdzLfcG0_KknotrZ6APQ at mail.gmail.com> > > > > > > > > > > > > > > Content-Type: text/plain; > > > > > > > charset="UTF-8" > > > > > > > > > > > > > > > > > > > > > > > > > > > > Hi Reece, > > > > > > > > > > > > > > > > > > > > > > > > > > > > I?m sorry to hear that. Did you build > > > > > > > a custom JAR file, or do you > > > > > > > > > > > > > > encounter problems with the JDK? > > > > > > > > > > > > > > > > > > > > > > > > > > > > Cheers, > > > > > > > > > > > > > > Christian > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Thu, Apr 29, 2021 at 9:48 PM Reece > > > > > > > Dunn <msclrhd at googlemail.com> > > > > > > > wrote: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Hi Christian, > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Thanks for the response. > > > > > > > Unfortunately, I've not been able to > > > > > > > get the reloading working. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Kind regards, > > > > > > > > > > > > > > > Reece > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Wed, 21 Apr 2021 at 18:49, > > > > > > > Christian Gr?n <christian.gruen at gmail.com> > > > > > > > wrote: > > > > > > > > > > > > > > >> > > > > > > > > > > > > > > >> Hi Reece, > > > > > > > > > > > > > > >> > > > > > > > > > > > > > > >> If you install your Java code > > > > > > > as JAR file in the repository [1], the > > > > > > > > > > > > > > >> code will be loaded and > > > > > > > unloaded every time when your query is > > > > > > > > > > > > > > >> executed. If you get an error > > > > > > > message? > > > > > > > > > > > > > > >> > > > > > > > > > > > > > > >> > > > > > > > java.lang.reflect.InaccessibleObjectException: > > > > > > > Unable to make field > > > > > > > > > > > > > > >> private final > > > > > > > jdk.internal.loader.URLClassPath > > > > > > > > > > > > > > >> java.net.URLClassLoader.ucp > > > > > > > accessible: module java.base does not > > > > > > > > > > > > > > >> "opens java.net" > > > > > > > to unnamed module @79e2c065 > > > > > > > > > > > > > > >> > > > > > > > > > > > > > > >> ?unloading fails [2], as > > > > > > > you?re probably using a more recent > > > > > > > version > > > > > > > > > > > > > > >> of the JDK, which restricts > > > > > > > reflective access to internal > > > > > > > variables. > > > > > > > > > > > > > > >> You can get around this by > > > > > > > adding Java flags at startup time: > > > > > > > > > > > > > > >> > > > > > > > > > > > > > > >> --add-opens java.base/java.net=ALL-UNNAMED > > > > > > > > > > > > > > >> --add-opens > > > > > > > java.base/jdk.internal.loader=ALL-UNNAMED > > > > > > > > > > > > > > >> > > > > > > > > > > > > > > >> Maybe there are better > > > > > > > solutions to unload JAR files today. > > > > > > > > > > > > > > >> Suggestions are welcome! > > > > > > > > > > > > > > >> > > > > > > > > > > > > > > >> Hope this helps, > > > > > > > > > > > > > > >> Christian > > > > > > > > > > > > > > >> > > > > > > > > > > > > > > >> [1] https://docs.basex.org/wiki/Repository#Java > > > > > > > > > > > > > > >> [2] https://github.com/BaseXdb/basex/blob/master/basex-core/src/main/java/org/basex/util/JarLoader.java#L34 > > > > > > > > > > > > > > >> > > > > > > > > > > > > > > >> > > > > > > > > > > > > > > >> > > > > > > > > > > > > > > >> On Tue, Apr 20, 2021 at 6:44 > > > > > > > PM Reece Dunn <msclrhd at googlemail.com> > > > > > > > wrote: > > > > > > > > > > > > > > >> > > > > > > > > > > > > > > > >> > Hi all, > > > > > > > > > > > > > > >> > > > > > > > > > > > > > > > >> > I'm working on a Java > > > > > > > class that I'm importing into an > > > > > > > XQuery, so I can do additional > > > > > > > processing on the data that isn't > > > > > > > easily expressible in XQuery (or > > > > > > > XSLT). In order to get BaseX to pick > > > > > > > up a modified version of the jar file > > > > > > > I'm building, I'm restarting the BaseX > > > > > > > http server. > > > > > > > > > > > > > > >> > > > > > > > > > > > > > > > >> > This makes it slower to > > > > > > > turn around testing the changes. Is > > > > > > > there a better way of doing this? > > > > > > > > > > > > > > >> > > > > > > > > > > > > > > > >> > Kind regards, > > > > > > > > > > > > > > >> > Reece > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ------------------------------ > > > > > > > > > > > > > > > > > > > > > > > > > > > > Message: 6 > > > > > > > > > > > > > > Date: Fri, 30 Apr 2021 08:55:49 +0200 > > > > > > > > > > > > > > From: Christian Gr?n <christian.gruen at gmail.com> > > > > > > > > > > > > > > To: Reece Dunn <msclrhd at googlemail.com> > > > > > > > > > > > > > > Cc: BaseX <basex-talk at mailman.uni-konstanz.de> > > > > > > > > > > > > > > Subject: Re: [basex-talk] Getting > > > > > > > profile information in server > > > > > > > > > > > > > > responses. > > > > > > > > > > > > > > Message-ID: > > > > > > > > > > > > > > <CAP94bnMCyZqRYvMEJG7EkON+FjNS0fsGWwx-_2EQrzzYPV-hZQ at mail.gmail.com> > > > > > > > > > > > > > > Content-Type: text/plain; > > > > > > > charset="UTF-8" > > > > > > > > > > > > > > > > > > > > > > > > > > > > A good idea; I?ll think of ways to get > > > > > > > this included. One challenge > > > > > > > > > > > > > > might be that the response is streamed > > > > > > > to the client. This means that > > > > > > > > > > > > > > when creating the HTTP request > > > > > > > headers, it will not be known yet how > > > > > > > > > > > > > > long the evaluation will take (and the > > > > > > > time for evaluation may also > > > > > > > > > > > > > > depend on the connection speed). The > > > > > > > time for parsing and compiling > > > > > > > > > > > > > > the query should be known at that > > > > > > > time, though. ? Maybe we could > > > > > > > > > > > > > > suppress result streaming when timings > > > > > > > are requested. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Thu, Apr 29, 2021 at 9:50 PM Reece > > > > > > > Dunn <msclrhd at googlemail.com> > > > > > > > wrote: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Hi all, > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > In BaseX, is there a way to get > > > > > > > the profile timings (compile, run, > > > > > > > print, etc.) in the response of a HTTP > > > > > > > request via the Server-Timing header (https://developer.mozilla.org/en-US/docs/Web/HTTP/Headers/Server-Timing)? > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Kind regards, > > > > > > > > > > > > > > > Reece > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ------------------------------ > > > > > > > > > > > > > > > > > > > > > > > > > > > > Message: 7 > > > > > > > > > > > > > > Date: Fri, 30 Apr 2021 08:14:21 +0100 > > > > > > > > > > > > > > From: Reece Dunn <msclrhd at googlemail.com> > > > > > > > > > > > > > > To: Christian Gr?n <christian.gruen at gmail.com> > > > > > > > > > > > > > > Cc: BaseX <basex-talk at mailman.uni-konstanz.de> > > > > > > > > > > > > > > Subject: Re: [basex-talk] Reloading > > > > > > > jars on a running http server. > > > > > > > > > > > > > > Message-ID: > > > > > > > > > > > > > > > > > > > > > <CAGdtn25JU3aGsHZepExgDigQX7asNDOF=2C6PWJcz1kgQqZEfA at mail.gmail.com> > > > > > > > > > > > > > > Content-Type: text/plain; > > > > > > > charset="utf-8" > > > > > > > > > > > > > > > > > > > > > > > > > > > > Hi Christian, > > > > > > > > > > > > > > > > > > > > > > > > > > > > I'm not seeing any exceptions in the > > > > > > > console window, even when enabling the > > > > > > > > > > > > > > debug setting. I'm using the > > > > > > > AdoptOpenJDK 1.8. I also have > > > > > > > AdoptOpenJDK 11, > > > > > > > > > > > > > > but I assume that will have the issue > > > > > > > you described. > > > > > > > > > > > > > > > > > > > > > > > > > > > > It's a custom-built jar using Kotlin, > > > > > > > built via gradle. > > > > > > > > > > > > > > > > > > > > > > > > > > > > One thing that it could be is that I'm > > > > > > > using Kotlin objects (not classes), > > > > > > > > > > > > > > e.g.: > > > > > > > > > > > > > > > > > > > > > > > > > > > > package test > > > > > > > > > > > > > > object Test { fun f(): String = > > > > > > > "test" } > > > > > > > > > > > > > > > > > > > > > > > > > > > > and using it like: > > > > > > > > > > > > > > > > > > > > > > > > > > > > declare namespace Test = > > > > > > > "java:test.Test"; > > > > > > > > > > > > > > > > > > > > > > > > > > > > declare function test:f() as > > > > > > > xs:string { > > > > > > > > > > > > > > Test::f(Test::INSTANCE()) > > > > > > > > > > > > > > }; > > > > > > > > > > > > > > > > > > > > > > > > > > > > The build.gradle file is simple. It > > > > > > > looks something like this (removing > > > > > > > > > > > > > > things like the junit configuration): > > > > > > > > > > > > > > > > > > > > > > > > > > > > ----- > > > > > > > > > > > > > > buildscript { > > > > > > > > > > > > > > ext.kotlin_version = "1.4.32" > > > > > > > > > > > > > > ext.kotlin_stdlib = > > > > > > > "kotlin-stdlib" > > > > > > > > > > > > > > ext.java_version = "1.8" > > > > > > > > > > > > > > > > > > > > > > > > > > > > repositories { mavenCentral() } > > > > > > > > > > > > > > dependencies { classpath > > > > > > > > > > > > > > "org.jetbrains.kotlin:kotlin-gradle-plugin:$kotlin_version" } > > > > > > > > > > > > > > } > > > > > > > > > > > > > > > > > > > > > > > > > > > > apply plugin: 'kotlin' > > > > > > > > > > > > > > > > > > > > > > > > > > > > repositories { > > > > > > > > > > > > > > mavenCentral() > > > > > > > > > > > > > > mavenLocal() > > > > > > > > > > > > > > } > > > > > > > > > > > > > > > > > > > > > > > > > > > > compileKotlin { kotlinOptions { > > > > > > > jvmTarget = java_version } } > > > > > > > > > > > > > > compileTestKotlin { kotlinOptions { > > > > > > > jvmTarget = java_version } } > > > > > > > > > > > > > > > > > > > > > > > > > > > > dependencies { > > > > > > > > > > > > > > implementation > > > > > > > "org.jetbrains.kotlin:$kotlin_stdlib:$kotlin_version" > > > > > > > > > > > > > > } > > > > > > > > > > > > > > ----- > > > > > > > > > > > > > > > > > > > > > > > > > > > > You'll need to copy the > > > > > > > kotlin-stdlib-1.4.32.jar file in > > > > > > > addition to the > > > > > > > > > > > > > > test.jar file to BaseX's lib > > > > > > > directory. > > > > > > > > > > > > > > > > > > > > > > > > > > > > Kind regards, > > > > > > > > > > > > > > Reece > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Fri, 30 Apr 2021 at 07:48, > > > > > > > Christian Gr?n <christian.gruen at gmail.com> > > > > > > > > > > > > > > wrote: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Hi Reece, > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > I?m sorry to hear that. Did you > > > > > > > build a custom JAR file, or do you > > > > > > > > > > > > > > > encounter problems with the JDK? > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Cheers, > > > > > > > > > > > > > > > Christian > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Thu, Apr 29, 2021 at 9:48 PM > > > > > > > Reece Dunn <msclrhd at googlemail.com> > > > > > > > wrote: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Hi Christian, > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Thanks for the response. > > > > > > > Unfortunately, I've not been able to > > > > > > > get the > > > > > > > > > > > > > > > reloading working. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Kind regards, > > > > > > > > > > > > > > > > Reece > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Wed, 21 Apr 2021 at > > > > > > > 18:49, Christian Gr?n <christian.gruen at gmail.com> > > > > > > > > > > > > > > > wrote: > > > > > > > > > > > > > > > >> > > > > > > > > > > > > > > > >> Hi Reece, > > > > > > > > > > > > > > > >> > > > > > > > > > > > > > > > >> If you install your Java > > > > > > > code as JAR file in the repository > > > > > > > [1], the > > > > > > > > > > > > > > > >> code will be loaded and > > > > > > > unloaded every time when your query is > > > > > > > > > > > > > > > >> executed. If you get an > > > > > > > error message? > > > > > > > > > > > > > > > >> > > > > > > > > > > > > > > > >> > > > > > > > java.lang.reflect.InaccessibleObjectException: > > > > > > > Unable to make field > > > > > > > > > > > > > > > >> private final > > > > > > > jdk.internal.loader.URLClassPath > > > > > > > > > > > > > > > >> > > > > > > > java.net.URLClassLoader.ucp > > > > > > > accessible: module java.base does not > > > > > > > > > > > > > > > >> "opens java.net" > > > > > > > to unnamed module @79e2c065 > > > > > > > > > > > > > > > >> > > > > > > > > > > > > > > > >> ?unloading fails [2], as > > > > > > > you?re probably using a more recent > > > > > > > version > > > > > > > > > > > > > > > >> of the JDK, which > > > > > > > restricts reflective access to > > > > > > > internal variables. > > > > > > > > > > > > > > > >> You can get around this > > > > > > > by adding Java flags at startup time: > > > > > > > > > > > > > > > >> > > > > > > > > > > > > > > > >> --add-opens java.base/java.net=ALL-UNNAMED > > > > > > > > > > > > > > > >> --add-opens > > > > > > > java.base/jdk.internal.loader=ALL-UNNAMED > > > > > > > > > > > > > > > >> > > > > > > > > > > > > > > > >> Maybe there are better > > > > > > > solutions to unload JAR files today. > > > > > > > > > > > > > > > >> Suggestions are welcome! > > > > > > > > > > > > > > > >> > > > > > > > > > > > > > > > >> Hope this helps, > > > > > > > > > > > > > > > >> Christian > > > > > > > > > > > > > > > >> > > > > > > > > > > > > > > > >> [1] https://docs.basex.org/wiki/Repository#Java > > > > > > > > > > > > > > > >> [2] > > > > > > > > > > > > > > > https://github.com/BaseXdb/basex/blob/master/basex-core/src/main/java/org/basex/util/JarLoader.java#L34 > > > > > > > > > > > > > > > >> > > > > > > > > > > > > > > > >> > > > > > > > > > > > > > > > >> > > > > > > > > > > > > > > > >> On Tue, Apr 20, 2021 at > > > > > > > 6:44 PM Reece Dunn <msclrhd at googlemail.com> > > > > > > > > > > > > > > > wrote: > > > > > > > > > > > > > > > >> > > > > > > > > > > > > > > > > >> > Hi all, > > > > > > > > > > > > > > > >> > > > > > > > > > > > > > > > > >> > I'm working on a > > > > > > > Java class that I'm importing into an > > > > > > > XQuery, so I > > > > > > > > > > > > > > > can do additional processing on > > > > > > > the data that isn't easily expressible > > > > > > > in > > > > > > > > > > > > > > > XQuery (or XSLT). In order to get > > > > > > > BaseX to pick up a modified version of > > > > > > > > > > > > > > > the jar file I'm building, I'm > > > > > > > restarting the BaseX http server. > > > > > > > > > > > > > > > >> > > > > > > > > > > > > > > > > >> > This makes it > > > > > > > slower to turn around testing the > > > > > > > changes. Is there a > > > > > > > > > > > > > > > better way of doing this? > > > > > > > > > > > > > > > >> > > > > > > > > > > > > > > > > >> > Kind regards, > > > > > > > > > > > > > > > >> > Reece > > > > > > > > > > > > > > > > > > > > > > > > > > > > > -------------- next part > > > > > > > -------------- > > > > > > > > > > > > > > An HTML attachment was scrubbed... > > > > > > > > > > > > > > URL: <http://mailman.uni-konstanz.de/pipermail/basex-talk/attachments/20210430/1b9943e9/attachment-0001.htm> > > > > > > > > > > > > > > > > > > > > > > > > > > > > ------------------------------ > > > > > > > > > > > > > > > > > > > > > > > > > > > > Message: 8 > > > > > > > > > > > > > > Date: Fri, 30 Apr 2021 09:30:17 +0200 > > > > > > > > > > > > > > From: Christian Gr?n <christian.gruen at gmail.com> > > > > > > > > > > > > > > To: Reece Dunn <msclrhd at googlemail.com> > > > > > > > > > > > > > > Cc: BaseX <basex-talk at mailman.uni-konstanz.de> > > > > > > > > > > > > > > Subject: Re: [basex-talk] Reloading > > > > > > > jars on a running http server. > > > > > > > > > > > > > > Message-ID: > > > > > > > > > > > > > > > > > > > > > <CAP94bnN5QnMVBoaNzAL8WOuUo7N8MDYbM4+z=3fTqdn_eUVyZg at mail.gmail.com> > > > > > > > > > > > > > > Content-Type: text/plain; > > > > > > > charset="UTF-8" > > > > > > > > > > > > > > > > > > > > > > > > > > > > Hi Reece, > > > > > > > > > > > > > > > > > > > > > > > > > > > > > You'll need to copy the > > > > > > > kotlin-stdlib-1.4.32.jar file in > > > > > > > addition to the test.jar file to > > > > > > > BaseX's lib directory. > > > > > > > > > > > > > > > > > > > > > > > > > > > > Please note that JAR libraries will > > > > > > > only be unregistered after query > > > > > > > > > > > > > > evalution if they are moved into the > > > > > > > repo directory. If a library is > > > > > > > > > > > > > > copied into the lib directory, it will > > > > > > > be added to the static > > > > > > > > > > > > > > classpath. > > > > > > > > > > > > > > > > > > > > > > > > > > > > In the given case, you could probably > > > > > > > keep kotlin-stdlib-1.4.32.jar in > > > > > > > > > > > > > > the lib directory, but you?ll need to > > > > > > > keep your development code in > > > > > > > > > > > > > > the repository (as described in the > > > > > > > Wiki). It?s no problem, though, to > > > > > > > > > > > > > > directly modify the repo code (you > > > > > > > don?t have to use REPO INSTALL or > > > > > > > > > > > > > > repo:install for that). > > > > > > > > > > > > > > > > > > > > > > > > > > > > If the problem persists, feel free to > > > > > > > send me a little test.jar, I can > > > > > > > > > > > > > > then do further testing. > > > > > > > > > > > > > > > > > > > > > > > > > > > > Hope this helps, > > > > > > > > > > > > > > Christian > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Fri, Apr 30, 2021 at 9:14 AM Reece > > > > > > > Dunn <msclrhd at googlemail.com> > > > > > > > wrote: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Hi Christian, > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > I'm not seeing any exceptions in > > > > > > > the console window, even when enabling > > > > > > > the debug setting. I'm using the > > > > > > > AdoptOpenJDK 1.8. I also have > > > > > > > AdoptOpenJDK 11, but I assume that > > > > > > > will have the issue you described. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > It's a custom-built jar using > > > > > > > Kotlin, built via gradle. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > One thing that it could be is > > > > > > > that I'm using Kotlin objects (not > > > > > > > classes), e.g.: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > package test > > > > > > > > > > > > > > > object Test { fun f(): String > > > > > > > = "test" } > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > and using it like: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > declare namespace Test = > > > > > > > "java:test.Test"; > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > declare function test:f() as > > > > > > > xs:string { > > > > > > > > > > > > > > > Test::f(Test::INSTANCE()) > > > > > > > > > > > > > > > }; > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > The build.gradle file is simple. > > > > > > > It looks something like this (removing > > > > > > > things like the junit configuration): > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ----- > > > > > > > > > > > > > > > buildscript { > > > > > > > > > > > > > > > ext.kotlin_version = "1.4.32" > > > > > > > > > > > > > > > ext.kotlin_stdlib = > > > > > > > "kotlin-stdlib" > > > > > > > > > > > > > > > ext.java_version = "1.8" > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > repositories { mavenCentral() > > > > > > > } > > > > > > > > > > > > > > > dependencies { classpath > > > > > > > "org.jetbrains.kotlin:kotlin-gradle-plugin:$kotlin_version" > > > > > > > } > > > > > > > > > > > > > > > } > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > apply plugin: 'kotlin' > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > repositories { > > > > > > > > > > > > > > > mavenCentral() > > > > > > > > > > > > > > > mavenLocal() > > > > > > > > > > > > > > > } > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > compileKotlin { kotlinOptions { > > > > > > > jvmTarget = java_version } } > > > > > > > > > > > > > > > compileTestKotlin { kotlinOptions > > > > > > > { jvmTarget = java_version } } > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > dependencies { > > > > > > > > > > > > > > > implementation > > > > > > > "org.jetbrains.kotlin:$kotlin_stdlib:$kotlin_version" > > > > > > > > > > > > > > > } > > > > > > > > > > > > > > > ----- > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > You'll need to copy the > > > > > > > kotlin-stdlib-1.4.32.jar file in > > > > > > > addition to the test.jar file to > > > > > > > BaseX's lib directory. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Kind regards, > > > > > > > > > > > > > > > Reece > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Fri, 30 Apr 2021 at 07:48, > > > > > > > Christian Gr?n <christian.gruen at gmail.com> > > > > > > > wrote: > > > > > > > > > > > > > > >> > > > > > > > > > > > > > > >> Hi Reece, > > > > > > > > > > > > > > >> > > > > > > > > > > > > > > >> I?m sorry to hear that. Did > > > > > > > you build a custom JAR file, or do you > > > > > > > > > > > > > > >> encounter problems with the > > > > > > > JDK? > > > > > > > > > > > > > > >> > > > > > > > > > > > > > > >> Cheers, > > > > > > > > > > > > > > >> Christian > > > > > > > > > > > > > > >> > > > > > > > > > > > > > > >> > > > > > > > > > > > > > > >> > > > > > > > > > > > > > > >> On Thu, Apr 29, 2021 at 9:48 > > > > > > > PM Reece Dunn <msclrhd at googlemail.com> > > > > > > > wrote: > > > > > > > > > > > > > > >> > > > > > > > > > > > > > > > >> > Hi Christian, > > > > > > > > > > > > > > >> > > > > > > > > > > > > > > > >> > Thanks for the response. > > > > > > > Unfortunately, I've not been able to > > > > > > > get the reloading working. > > > > > > > > > > > > > > >> > > > > > > > > > > > > > > > >> > Kind regards, > > > > > > > > > > > > > > >> > Reece > > > > > > > > > > > > > > >> > > > > > > > > > > > > > > > >> > On Wed, 21 Apr 2021 at > > > > > > > 18:49, Christian Gr?n <christian.gruen at gmail.com> > > > > > > > wrote: > > > > > > > > > > > > > > >> >> > > > > > > > > > > > > > > >> >> Hi Reece, > > > > > > > > > > > > > > >> >> > > > > > > > > > > > > > > >> >> If you install your > > > > > > > Java code as JAR file in the > > > > > > > repository [1], the > > > > > > > > > > > > > > >> >> code will be loaded > > > > > > > and unloaded every time when your > > > > > > > query is > > > > > > > > > > > > > > >> >> executed. If you get > > > > > > > an error message? > > > > > > > > > > > > > > >> >> > > > > > > > > > > > > > > >> >> > > > > > > > java.lang.reflect.InaccessibleObjectException: > > > > > > > Unable to make field > > > > > > > > > > > > > > >> >> private final > > > > > > > jdk.internal.loader.URLClassPath > > > > > > > > > > > > > > >> >> > > > > > > > java.net.URLClassLoader.ucp > > > > > > > accessible: module java.base does not > > > > > > > > > > > > > > >> >> "opens java.net" > > > > > > > to unnamed module @79e2c065 > > > > > > > > > > > > > > >> >> > > > > > > > > > > > > > > >> >> ?unloading fails > > > > > > > [2], as you?re probably using a more > > > > > > > recent version > > > > > > > > > > > > > > >> >> of the JDK, which > > > > > > > restricts reflective access to > > > > > > > internal variables. > > > > > > > > > > > > > > >> >> You can get around > > > > > > > this by adding Java flags at startup > > > > > > > time: > > > > > > > > > > > > > > >> >> > > > > > > > > > > > > > > >> >> --add-opens > > > > > > > java.base/java.net=ALL-UNNAMED > > > > > > > > > > > > > > >> >> --add-opens > > > > > > > java.base/jdk.internal.loader=ALL-UNNAMED > > > > > > > > > > > > > > >> >> > > > > > > > > > > > > > > >> >> Maybe there are > > > > > > > better solutions to unload JAR files > > > > > > > today. > > > > > > > > > > > > > > >> >> Suggestions are > > > > > > > welcome! > > > > > > > > > > > > > > >> >> > > > > > > > > > > > > > > >> >> Hope this helps, > > > > > > > > > > > > > > >> >> Christian > > > > > > > > > > > > > > >> >> > > > > > > > > > > > > > > >> >> [1] https://docs.basex.org/wiki/Repository#Java > > > > > > > > > > > > > > >> >> [2] https://github.com/BaseXdb/basex/blob/master/basex-core/src/main/java/org/basex/util/JarLoader.java#L34 > > > > > > > > > > > > > > >> >> > > > > > > > > > > > > > > >> >> > > > > > > > > > > > > > > >> >> > > > > > > > > > > > > > > >> >> On Tue, Apr 20, 2021 > > > > > > > at 6:44 PM Reece Dunn <msclrhd at googlemail.com> > > > > > > > wrote: > > > > > > > > > > > > > > >> >> > > > > > > > > > > > > > > > >> >> > Hi all, > > > > > > > > > > > > > > >> >> > > > > > > > > > > > > > > > >> >> > I'm working on > > > > > > > a Java class that I'm importing into > > > > > > > an XQuery, so I can do additional > > > > > > > processing on the data that isn't > > > > > > > easily expressible in XQuery (or > > > > > > > XSLT). In order to get BaseX to pick > > > > > > > up a modified version of the jar file > > > > > > > I'm building, I'm restarting the BaseX > > > > > > > http server. > > > > > > > > > > > > > > >> >> > > > > > > > > > > > > > > > >> >> > This makes it > > > > > > > slower to turn around testing the > > > > > > > changes. Is there a better way of > > > > > > > doing this? > > > > > > > > > > > > > > >> >> > > > > > > > > > > > > > > > >> >> > Kind regards, > > > > > > > > > > > > > > >> >> > Reece > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ------------------------------ > > > > > > > > > > > > > > > > > > > > > > > > > > > > Message: 9 > > > > > > > > > > > > > > Date: Fri, 30 Apr 2021 09:37:14 +0200 > > > > > > > > > > > > > > From: Marco Lettere <m.lettere at gmail.com> > > > > > > > > > > > > > > To: basex-talk at mailman.uni-konstanz.de > > > > > > > > > > > > > > Subject: Re: [basex-talk] Make use of > > > > > > > external Identity Management for > > > > > > > > > > > > > > BaseX > > > > > > > > > > > > > > Message-ID: <1a8d807b-9cb3-3cd4-f1b7-22aff5446154 at gmail.com> > > > > > > > > > > > > > > Content-Type: text/plain; > > > > > > > charset=utf-8; format=flowed > > > > > > > > > > > > > > > > > > > > > > > > > > > > Hi Christian and Rob, > > > > > > > > > > > > > > as the authors of the code you point > > > > > > > to we confirm that interacting with > > > > > > > > > > > > > > Keycloak in XQuery and in particular > > > > > > > RestXQ is rather comfortable. > > > > > > > > > > > > > > That example is mostly a demonstration > > > > > > > code for a tool that scrapes a > > > > > > > > > > > > > > site index and registers sites named > > > > > > > gateways as public clients (in > > > > > > > > > > > > > > Oauth2 sense) into a Keycloak > > > > > > > instance. > > > > > > > > > > > > > > It is a proof of concept (as you can > > > > > > > see from the credentials? :-D) that > > > > > > > > > > > > > > has been used as a batch one-time > > > > > > > migration in a particular setting. > > > > > > > > > > > > > > > > > > > > > > > > > > > > We have also a RestXQ module that in > > > > > > > combination with basex:perm > > > > > > > > > > > > > > annotations protects access to a GUI > > > > > > > implementing the Oauth2 Code-grant > > > > > > > > > > > > > > flow. If Rob is interested we could > > > > > > > share. > > > > > > > > > > > > > > > > > > > > > > > > > > > > If there should be any plan of > > > > > > > integrating Oauth2/OIDC flows more > > > > > > > > > > > > > > tightly into BaseX we could also be > > > > > > > available for helping out. > > > > > > > > > > > > > > > > > > > > > > > > > > > > Regards, > > > > > > > > > > > > > > Marco. > > > > > > > > > > > > > > > > > > > > > > > > > > > > On 30/04/21 08:47, Christian Gr?n > > > > > > > wrote: > > > > > > > > > > > > > > > Hi Rob, > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > There is no prepackaged module > > > > > > > for Keycloak (at least I?m aware of > > > > > > > > > > > > > > > none), but you can write your own > > > > > > > code with XQuery. See [1] for an > > > > > > > > > > > > > > > example how this might look like. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Are you using RESTXQ? > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Best, > > > > > > > > > > > > > > > Christian > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > [1] https://code-repo.d4science.org/gCubeSystem/d4science-keycloak-themes/src/branch/master/src/utils/xquery > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Thu, Apr 29, 2021 at 3:54 PM > > > > > > > Rob <private at tjalma.com> > > > > > > > wrote: > > > > > > > > > > > > > > >> Hi, > > > > > > > > > > > > > > >> > > > > > > > > > > > > > > >> I have a question. > > > > > > > > > > > > > > >> Can BaseX make use of an > > > > > > > Identity Management application like > > > > > > > Keycloak for Users? > > > > > > > > > > > > > > >> > > > > > > > > > > > > > > >> I can?t find anything about > > > > > > > it :) > > > > > > > > > > > > > > >> > > > > > > > > > > > > > > >> With kind regards, > > > > > > > > > > > > > > >> Rob Tjalma > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > End of BaseX-Talk Digest, Vol 136, > > > > > > > Issue 17 > > > > > > > > > > > > > > ******************************************* > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >

On 04/05/21 11:08, Rob wrote: > > Thanks Marco! > > > > > The example is not copyrighted? :) > > > > > > Kind regards, > > Rob > > > > > > > Op 4 mei 2021, om 09:53 heeft Marco Lettere > > <m.lettere at gmail.com> het > > volgende geschreven: > > > > > > > > > > > > > > Forgot to mention that for > > decoding the JWT we needed to hook up Java's internal > > B64 decoder because I don't remember why the one > > provided with basex was not able to handle that > > encoding. > > > > > > > > > > > > > > > > On 04/05/21 09:51, Marco > > Lettere wrote: > > > > > > > > > > > > > > Hi Rob and all, > > > > > > I attach here an example > > > of an OIDC code grant flow implemented with RestXQ, > > > BaseX permission and error handler. > > > > > > The file includes a sort > > > of library for performing the steps of the OIDC flow > > > plus a minimal application that is registered as > > > public client inside keycloak and which is what you > > > should access from your browser by calling http://localhost:8984/authtest > > > or http://localhost:8984/authtest/internal. > > > > > > > > > > > > I've put into it also the > > > logout procedure for performing the back-channel > > > logout which closes the SSO session. > > > > > > > > > > > > > > > > > > This is only a resume of > > > a more generic and complex module but it should be > > > useful as a howto and it should be as simple to > > > install as copying the file to your BaseX' webapp > > > folder. Use it as you like. > > > > > > Regards, > > > > > > Marco. > > > > > > > > > > > > > > > > > > > > > > > > On 03/05/21 12:50, Rob > > > wrote: > > > > > > > > > > > > > > > > > > > > Hi Marco, > > > > > > > > > > > > > > > > > > > > Got it! > > > > > > > > Looking forward to the code! :) > > > > > > > > > > > > > > > > > > > > > > > > With kind regards, > > > > > > > > Rob > > > > > > > > > > > > > > > > > > > > > Op 3 mei 2021, om 09:23 heeft > > > > > Marco Lettere <m.lettere at gmail.com> > > > > > het volgende geschreven: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Hi Rob, > > > > > > > > > > no the code > > > > > in the repository the link refers to is > > > > > more like administrative tooling for > > > > > batch importing configuration into > > > > > Keycloak for administration purposes. > > > > > > > > > > I'll work on > > > > > creating an excerpt of the code that > > > > > realizes Oauth2 code grant flow with > > > > > RestXQ and Keycloak and I'll share by > > > > > tonight hopefully. > > > > > > > > > > Regards, > > > > > > > > > > Marco. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On 01/05/21 > > > > > 17:49, Rob wrote: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Hi all! > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Sorry for the late > > > > > > response! > > > > > > > > > > > > I’m reading all the emails > > > > > > now, haha. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > I’m very happy to hear > > > > > > that it’s possible, I see you shared > > > > > > the following: > > > > > > > > > > > > https://code-repo.d4science.org/gCubeSystem/d4science-keycloak-themes/src/branch/master/src/utils/xquery > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Thanks for sharing! > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Based on the following > > > > > > quote from Marco’s mail: > > > > > > > > > > > > "We have > > > > > > also a RestXQ module that in > > > > > > combination with basex:perm > > > > > > annotations protects access to a GUI > > > > > > implementing the Oauth2 Code-grant > > > > > > flow. If Rob is interested we could > > > > > > share.” > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > The link above, is > > > > > > that the RESTXQ module Marco’s been > > > > > > talking about? > > > > > > > > > > > > Or is there another > > > > > > RESTXQ module? > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > With kind regards, > > > > > > > > > > > > Rob > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Op 1 mei 2021, om > > > > > > > 05:29 heeft Adam Law <adamjameslaw at gmail.com> > > > > > > > het volgende geschreven: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > If Rob isn't > > > > > > > interested, I certain am... > > > > > > > Yes please share > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >>We have > > > > > > > also a RestXQ module that in > > > > > > > combination with basex:perm > > > > > > > > > > > > > > > > > > > > > annotations protects access > > > > > > > to a GUI implementing the > > > > > > > Oauth2 Code-grant > > > > > > > > > > > > > > flow. If Rob is interested > > > > > > > we could share. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Many thanks for > > > > > > > sharing https://code-repo.d4science.org/gCubeSystem/d4science-keycloak-themes/src/branch/master/src/utils/xquery > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > This is a bit > > > > > > > forward of me, but would you > > > > > > > consider changing the > > > > > > > license away from European > > > > > > > Union Public Licence which > > > > > > > appears to be 'copyleft' to > > > > > > > say BSD 3-Clause, MIT, ... > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Adam > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Fri, > > > > > > > Apr 30, 2021 at 6:00 PM > > > > > > > <basex-talk-request at mailman.uni-konstanz.de> > > > > > > > wrote: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Send > > > > > > > > BaseX-Talk mailing list > > > > > > > > submissions to > > > > > > > > > > > > > > > > basex-talk at mailman.uni-konstanz.de > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > To subscribe or > > > > > > > > unsubscribe via the World > > > > > > > > Wide Web, visit > > > > > > > > > > > > > > > > https://mailman.uni-konstanz.de/mailman/listinfo/basex-talk > > > > > > > > > > > > > > > > or, via email, send a > > > > > > > > message with subject or > > > > > > > > body 'help' to > > > > > > > > > > > > > > > > basex-talk-request at mailman.uni-konstanz.de > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > You can reach the person > > > > > > > > managing the list at > > > > > > > > > > > > > > > > basex-talk-owner at mailman.uni-konstanz.de > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > When replying, please edit > > > > > > > > your Subject line so it is > > > > > > > > more specific > > > > > > > > > > > > > > > > than "Re: Contents of > > > > > > > > BaseX-Talk digest..." > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Today's Topics: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > 1. Make use of external > > > > > > > > Identity Management for > > > > > > > > BaseX (Rob) > > > > > > > > > > > > > > > > 2. Re: Reloading jars > > > > > > > > on a running http server. > > > > > > > > (Reece Dunn) > > > > > > > > > > > > > > > > 3. Getting profile > > > > > > > > information in server > > > > > > > > responses. (Reece Dunn) > > > > > > > > > > > > > > > > 4. Re: Make use of > > > > > > > > external Identity > > > > > > > > Management for BaseX > > > > > > > > > > > > > > > > (Christian Gr?n) > > > > > > > > > > > > > > > > 5. Re: Reloading jars > > > > > > > > on a running http server. > > > > > > > > (Christian Gr?n) > > > > > > > > > > > > > > > > 6. Re: Getting profile > > > > > > > > information in server > > > > > > > > responses. > > > > > > > > > > > > > > > > (Christian Gr?n) > > > > > > > > > > > > > > > > 7. Re: Reloading jars > > > > > > > > on a running http server. > > > > > > > > (Reece Dunn) > > > > > > > > > > > > > > > > 8. Re: Reloading jars > > > > > > > > on a running http server. > > > > > > > > (Christian Gr?n) > > > > > > > > > > > > > > > > 9. Re: Make use of > > > > > > > > external Identity > > > > > > > > Management for BaseX > > > > > > > > > > > > > > > > (Marco Lettere) > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ---------------------------------------------------------------------- > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Message: 1 > > > > > > > > > > > > > > > > Date: Thu, 29 Apr 2021 > > > > > > > > 15:54:08 +0200 > > > > > > > > > > > > > > > > From: Rob <private at tjalma.com> > > > > > > > > > > > > > > > > To: BaseX <basex-talk at mailman.uni-konstanz.de> > > > > > > > > > > > > > > > > Subject: [basex-talk] Make > > > > > > > > use of external Identity > > > > > > > > Management for > > > > > > > > > > > > > > > > BaseX > > > > > > > > > > > > > > > > Message-ID: <39036EF3-E67D-470D-B2F4-E6FBFFDF40E6 at tjalma.com> > > > > > > > > > > > > > > > > Content-Type: text/plain; > > > > > > > > charset=utf-8 > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Hi, > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > I have a question. > > > > > > > > > > > > > > > > Can BaseX make use of an > > > > > > > > Identity Management > > > > > > > > application like Keycloak > > > > > > > > for Users? > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > I can?t find anything > > > > > > > > about it :) > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > With kind regards, > > > > > > > > > > > > > > > > Rob Tjalma > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ------------------------------ > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Message: 2 > > > > > > > > > > > > > > > > Date: Thu, 29 Apr 2021 > > > > > > > > 20:48:09 +0100 > > > > > > > > > > > > > > > > From: Reece Dunn <msclrhd at googlemail.com> > > > > > > > > > > > > > > > > To: Christian Gr?n <christian.gruen at gmail.com> > > > > > > > > > > > > > > > > Cc: BaseX <basex-talk at mailman.uni-konstanz.de> > > > > > > > > > > > > > > > > Subject: Re: [basex-talk] > > > > > > > > Reloading jars on a > > > > > > > > running http server. > > > > > > > > > > > > > > > > Message-ID: > > > > > > > > > > > > > > > > > > > > > > > > <CAGdtn24Qdgbe3=nebYA1je4hCrZVAgi_sercCRxsTxmZcWcAxQ at mail.gmail.com> > > > > > > > > > > > > > > > > Content-Type: text/plain; > > > > > > > > charset="utf-8" > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Hi Christian, > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Thanks for the response. > > > > > > > > Unfortunately, I've not > > > > > > > > been able to get the > > > > > > > > > > > > > > > > reloading working. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Kind regards, > > > > > > > > > > > > > > > > Reece > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Wed, 21 Apr 2021 at > > > > > > > > 18:49, Christian Gr?n <christian.gruen at gmail.com> > > > > > > > > > > > > > > > > wrote: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Hi Reece, > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > If you install your > > > > > > > > Java code as JAR file in > > > > > > > > the repository [1], the > > > > > > > > > > > > > > > > > code will be loaded > > > > > > > > and unloaded every time > > > > > > > > when your query is > > > > > > > > > > > > > > > > > executed. If you get > > > > > > > > an error message? > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > java.lang.reflect.InaccessibleObjectException: > > > > > > > > Unable to make field > > > > > > > > > > > > > > > > > private final > > > > > > > > jdk.internal.loader.URLClassPath > > > > > > > > > > > > > > > > > > > > > > > > > java.net.URLClassLoader.ucp > > > > > > > > accessible: module > > > > > > > > java.base does not > > > > > > > > > > > > > > > > > "opens java.net" > > > > > > > > to unnamed module > > > > > > > > @79e2c065 > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ?unloading fails [2], > > > > > > > > as you?re probably using a > > > > > > > > more recent version > > > > > > > > > > > > > > > > > of the JDK, which > > > > > > > > restricts reflective > > > > > > > > access to internal > > > > > > > > variables. > > > > > > > > > > > > > > > > > You can get around > > > > > > > > this by adding Java flags > > > > > > > > at startup time: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > --add-opens > > > > > > > > java.base/java.net=ALL-UNNAMED > > > > > > > > > > > > > > > > > --add-opens > > > > > > > > java.base/jdk.internal.loader=ALL-UNNAMED > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Maybe there are > > > > > > > > better solutions to unload > > > > > > > > JAR files today. > > > > > > > > > > > > > > > > > Suggestions are > > > > > > > > welcome! > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Hope this helps, > > > > > > > > > > > > > > > > > Christian > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > [1] https://docs.basex.org/wiki/Repository#Java > > > > > > > > > > > > > > > > > [2] > > > > > > > > > > > > > > > > > https://github.com/BaseXdb/basex/blob/master/basex-core/src/main/java/org/basex/util/JarLoader.java#L34 > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Tue, Apr 20, 2021 > > > > > > > > at 6:44 PM Reece Dunn <msclrhd at googlemail.com> > > > > > > > > wrote: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Hi all, > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > I'm working on a > > > > > > > > Java class that I'm > > > > > > > > importing into an XQuery, > > > > > > > > so I can > > > > > > > > > > > > > > > > > do additional > > > > > > > > processing on the data > > > > > > > > that isn't easily > > > > > > > > expressible in > > > > > > > > > > > > > > > > > XQuery (or XSLT). In > > > > > > > > order to get BaseX to pick > > > > > > > > up a modified version of > > > > > > > > > > > > > > > > > the jar file I'm > > > > > > > > building, I'm restarting > > > > > > > > the BaseX http server. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > This makes it > > > > > > > > slower to turn around > > > > > > > > testing the changes. Is > > > > > > > > there a > > > > > > > > > > > > > > > > > better way of doing > > > > > > > > this? > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Kind regards, > > > > > > > > > > > > > > > > > > Reece > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > -------------- next part > > > > > > > > -------------- > > > > > > > > > > > > > > > > An HTML attachment was > > > > > > > > scrubbed... > > > > > > > > > > > > > > > > URL: <http://mailman.uni-konstanz.de/pipermail/basex-talk/attachments/20210429/fba079e2/attachment-0001.htm> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ------------------------------ > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Message: 3 > > > > > > > > > > > > > > > > Date: Thu, 29 Apr 2021 > > > > > > > > 20:50:40 +0100 > > > > > > > > > > > > > > > > From: Reece Dunn <msclrhd at googlemail.com> > > > > > > > > > > > > > > > > To: BaseX <basex-talk at mailman.uni-konstanz.de> > > > > > > > > > > > > > > > > Subject: [basex-talk] > > > > > > > > Getting profile > > > > > > > > information in server > > > > > > > > responses. > > > > > > > > > > > > > > > > Message-ID: > > > > > > > > > > > > > > > > <CAGdtn26mnN7Bu3bqUN8pkS1da4eq2tQstFOnx5nqqEvZPnHdkA at mail.gmail.com> > > > > > > > > > > > > > > > > Content-Type: text/plain; > > > > > > > > charset="utf-8" > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Hi all, > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > In BaseX, is there a way > > > > > > > > to get the profile timings > > > > > > > > (compile, run, print, > > > > > > > > > > > > > > > > etc.) in the response of a > > > > > > > > HTTP request via the > > > > > > > > Server-Timing header ( > > > > > > > > > > > > > > > > https://developer.mozilla.org/en-US/docs/Web/HTTP/Headers/Server-Timing)? > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Kind regards, > > > > > > > > > > > > > > > > Reece > > > > > > > > > > > > > > > > -------------- next part > > > > > > > > -------------- > > > > > > > > > > > > > > > > An HTML attachment was > > > > > > > > scrubbed... > > > > > > > > > > > > > > > > URL: <http://mailman.uni-konstanz.de/pipermail/basex-talk/attachments/20210429/12a4d4fa/attachment-0001.htm> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ------------------------------ > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Message: 4 > > > > > > > > > > > > > > > > Date: Fri, 30 Apr 2021 > > > > > > > > 08:47:36 +0200 > > > > > > > > > > > > > > > > From: Christian Gr?n <christian.gruen at gmail.com> > > > > > > > > > > > > > > > > To: Rob <private at tjalma.com> > > > > > > > > > > > > > > > > Cc: BaseX <basex-talk at mailman.uni-konstanz.de> > > > > > > > > > > > > > > > > Subject: Re: [basex-talk] > > > > > > > > Make use of external > > > > > > > > Identity Management for > > > > > > > > > > > > > > > > BaseX > > > > > > > > > > > > > > > > Message-ID: > > > > > > > > > > > > > > > > > > > > > > > > <CAP94bnP_-nFY6BQv38gqQdy9aoFn_gtRzgM1rW+GB7yjr=xTrA at mail.gmail.com> > > > > > > > > > > > > > > > > Content-Type: text/plain; > > > > > > > > charset="UTF-8" > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Hi Rob, > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > There is no prepackaged > > > > > > > > module for Keycloak (at > > > > > > > > least I?m aware of > > > > > > > > > > > > > > > > none), but you can write > > > > > > > > your own code with XQuery. > > > > > > > > See [1] for an > > > > > > > > > > > > > > > > example how this might > > > > > > > > look like. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Are you using RESTXQ? > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Best, > > > > > > > > > > > > > > > > Christian > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > [1] https://code-repo.d4science.org/gCubeSystem/d4science-keycloak-themes/src/branch/master/src/utils/xquery > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Thu, Apr 29, 2021 at > > > > > > > > 3:54 PM Rob <private at tjalma.com> > > > > > > > > wrote: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Hi, > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > I have a question. > > > > > > > > > > > > > > > > > Can BaseX make use of > > > > > > > > an Identity Management > > > > > > > > application like Keycloak > > > > > > > > for Users? > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > I can?t find anything > > > > > > > > about it :) > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > With kind regards, > > > > > > > > > > > > > > > > > Rob Tjalma > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ------------------------------ > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Message: 5 > > > > > > > > > > > > > > > > Date: Fri, 30 Apr 2021 > > > > > > > > 08:48:36 +0200 > > > > > > > > > > > > > > > > From: Christian Gr?n <christian.gruen at gmail.com> > > > > > > > > > > > > > > > > To: Reece Dunn <msclrhd at googlemail.com> > > > > > > > > > > > > > > > > Cc: BaseX <basex-talk at mailman.uni-konstanz.de> > > > > > > > > > > > > > > > > Subject: Re: [basex-talk] > > > > > > > > Reloading jars on a > > > > > > > > running http server. > > > > > > > > > > > > > > > > Message-ID: > > > > > > > > > > > > > > > > <CAP94bnNs_gmotGxEa2Mp-fcJzQxiO3HdzLfcG0_KknotrZ6APQ at mail.gmail.com> > > > > > > > > > > > > > > > > Content-Type: text/plain; > > > > > > > > charset="UTF-8" > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Hi Reece, > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > I?m sorry to hear that. > > > > > > > > Did you build a custom JAR > > > > > > > > file, or do you > > > > > > > > > > > > > > > > encounter problems with > > > > > > > > the JDK? > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Cheers, > > > > > > > > > > > > > > > > Christian > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Thu, Apr 29, 2021 at > > > > > > > > 9:48 PM Reece Dunn <msclrhd at googlemail.com> > > > > > > > > wrote: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Hi Christian, > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Thanks for the > > > > > > > > response. Unfortunately, > > > > > > > > I've not been able to get > > > > > > > > the reloading working. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Kind regards, > > > > > > > > > > > > > > > > > Reece > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Wed, 21 Apr 2021 > > > > > > > > at 18:49, Christian Gr?n > > > > > > > > <christian.gruen at gmail.com> > > > > > > > > wrote: > > > > > > > > > > > > > > > > >> > > > > > > > > > > > > > > > > >> Hi Reece, > > > > > > > > > > > > > > > > >> > > > > > > > > > > > > > > > > >> If you install > > > > > > > > your Java code as JAR file > > > > > > > > in the repository [1], the > > > > > > > > > > > > > > > > >> code will be > > > > > > > > loaded and unloaded every > > > > > > > > time when your query is > > > > > > > > > > > > > > > > >> executed. If you > > > > > > > > get an error message? > > > > > > > > > > > > > > > > >> > > > > > > > > > > > > > > > > >> > > > > > > > > java.lang.reflect.InaccessibleObjectException: > > > > > > > > Unable to make field > > > > > > > > > > > > > > > > >> private final > > > > > > > > jdk.internal.loader.URLClassPath > > > > > > > > > > > > > > > > >> > > > > > > > > java.net.URLClassLoader.ucp > > > > > > > > accessible: module > > > > > > > > java.base does not > > > > > > > > > > > > > > > > >> "opens java.net" > > > > > > > > to unnamed module > > > > > > > > @79e2c065 > > > > > > > > > > > > > > > > >> > > > > > > > > > > > > > > > > >> ?unloading fails > > > > > > > > [2], as you?re probably > > > > > > > > using a more recent > > > > > > > > version > > > > > > > > > > > > > > > > >> of the JDK, which > > > > > > > > restricts reflective > > > > > > > > access to internal > > > > > > > > variables. > > > > > > > > > > > > > > > > >> You can get > > > > > > > > around this by adding Java > > > > > > > > flags at startup time: > > > > > > > > > > > > > > > > >> > > > > > > > > > > > > > > > > >> --add-opens > > > > > > > > java.base/java.net=ALL-UNNAMED > > > > > > > > > > > > > > > > >> --add-opens > > > > > > > > java.base/jdk.internal.loader=ALL-UNNAMED > > > > > > > > > > > > > > > > >> > > > > > > > > > > > > > > > > >> Maybe there are > > > > > > > > better solutions to unload > > > > > > > > JAR files today. > > > > > > > > > > > > > > > > >> Suggestions are > > > > > > > > welcome! > > > > > > > > > > > > > > > > >> > > > > > > > > > > > > > > > > >> Hope this helps, > > > > > > > > > > > > > > > > >> Christian > > > > > > > > > > > > > > > > >> > > > > > > > > > > > > > > > > >> [1] https://docs.basex.org/wiki/Repository#Java > > > > > > > > > > > > > > > > >> [2] https://github.com/BaseXdb/basex/blob/master/basex-core/src/main/java/org/basex/util/JarLoader.java#L34 > > > > > > > > > > > > > > > > >> > > > > > > > > > > > > > > > > >> > > > > > > > > > > > > > > > > >> > > > > > > > > > > > > > > > > >> On Tue, Apr 20, > > > > > > > > 2021 at 6:44 PM Reece Dunn > > > > > > > > <msclrhd at googlemail.com> > > > > > > > > wrote: > > > > > > > > > > > > > > > > >> > > > > > > > > > > > > > > > > > >> > Hi all, > > > > > > > > > > > > > > > > >> > > > > > > > > > > > > > > > > > >> > I'm working > > > > > > > > on a Java class that I'm > > > > > > > > importing into an XQuery, > > > > > > > > so I can do additional > > > > > > > > processing on the data > > > > > > > > that isn't easily > > > > > > > > expressible in XQuery (or > > > > > > > > XSLT). In order to get > > > > > > > > BaseX to pick up a > > > > > > > > modified version of the > > > > > > > > jar file I'm building, I'm > > > > > > > > restarting the BaseX http > > > > > > > > server. > > > > > > > > > > > > > > > > >> > > > > > > > > > > > > > > > > > >> > This makes > > > > > > > > it slower to turn around > > > > > > > > testing the changes. Is > > > > > > > > there a better way of > > > > > > > > doing this? > > > > > > > > > > > > > > > > >> > > > > > > > > > > > > > > > > > >> > Kind > > > > > > > > regards, > > > > > > > > > > > > > > > > >> > Reece > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ------------------------------ > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Message: 6 > > > > > > > > > > > > > > > > Date: Fri, 30 Apr 2021 > > > > > > > > 08:55:49 +0200 > > > > > > > > > > > > > > > > From: Christian Gr?n <christian.gruen at gmail.com> > > > > > > > > > > > > > > > > To: Reece Dunn <msclrhd at googlemail.com> > > > > > > > > > > > > > > > > Cc: BaseX <basex-talk at mailman.uni-konstanz.de> > > > > > > > > > > > > > > > > Subject: Re: [basex-talk] > > > > > > > > Getting profile > > > > > > > > information in server > > > > > > > > > > > > > > > > responses. > > > > > > > > > > > > > > > > Message-ID: > > > > > > > > > > > > > > > > <CAP94bnMCyZqRYvMEJG7EkON+FjNS0fsGWwx-_2EQrzzYPV-hZQ at mail.gmail.com> > > > > > > > > > > > > > > > > Content-Type: text/plain; > > > > > > > > charset="UTF-8" > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > A good idea; I?ll think of > > > > > > > > ways to get this included. > > > > > > > > One challenge > > > > > > > > > > > > > > > > might be that the response > > > > > > > > is streamed to the client. > > > > > > > > This means that > > > > > > > > > > > > > > > > when creating the HTTP > > > > > > > > request headers, it will > > > > > > > > not be known yet how > > > > > > > > > > > > > > > > long the evaluation will > > > > > > > > take (and the time for > > > > > > > > evaluation may also > > > > > > > > > > > > > > > > depend on the connection > > > > > > > > speed). The time for > > > > > > > > parsing and compiling > > > > > > > > > > > > > > > > the query should be known > > > > > > > > at that time, though. ? > > > > > > > > Maybe we could > > > > > > > > > > > > > > > > suppress result streaming > > > > > > > > when timings are > > > > > > > > requested. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Thu, Apr 29, 2021 at > > > > > > > > 9:50 PM Reece Dunn <msclrhd at googlemail.com> > > > > > > > > wrote: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Hi all, > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > In BaseX, is there a > > > > > > > > way to get the profile > > > > > > > > timings (compile, run, > > > > > > > > print, etc.) in the > > > > > > > > response of a HTTP request > > > > > > > > via the Server-Timing > > > > > > > > header (https://developer.mozilla.org/en-US/docs/Web/HTTP/Headers/Server-Timing)? > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Kind regards, > > > > > > > > > > > > > > > > > Reece > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ------------------------------ > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Message: 7 > > > > > > > > > > > > > > > > Date: Fri, 30 Apr 2021 > > > > > > > > 08:14:21 +0100 > > > > > > > > > > > > > > > > From: Reece Dunn <msclrhd at googlemail.com> > > > > > > > > > > > > > > > > To: Christian Gr?n <christian.gruen at gmail.com> > > > > > > > > > > > > > > > > Cc: BaseX <basex-talk at mailman.uni-konstanz.de> > > > > > > > > > > > > > > > > Subject: Re: [basex-talk] > > > > > > > > Reloading jars on a > > > > > > > > running http server. > > > > > > > > > > > > > > > > Message-ID: > > > > > > > > > > > > > > > > > > > > > > > > <CAGdtn25JU3aGsHZepExgDigQX7asNDOF=2C6PWJcz1kgQqZEfA at mail.gmail.com> > > > > > > > > > > > > > > > > Content-Type: text/plain; > > > > > > > > charset="utf-8" > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Hi Christian, > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > I'm not seeing any > > > > > > > > exceptions in the console > > > > > > > > window, even when enabling > > > > > > > > the > > > > > > > > > > > > > > > > debug setting. I'm using > > > > > > > > the AdoptOpenJDK 1.8. I > > > > > > > > also have AdoptOpenJDK 11, > > > > > > > > > > > > > > > > but I assume that will > > > > > > > > have the issue you > > > > > > > > described. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > It's a custom-built jar > > > > > > > > using Kotlin, built via > > > > > > > > gradle. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > One thing that it could be > > > > > > > > is that I'm using Kotlin > > > > > > > > objects (not classes), > > > > > > > > > > > > > > > > e.g.: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > package test > > > > > > > > > > > > > > > > object Test { fun f(): > > > > > > > > String = "test" } > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > and using it like: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > declare namespace Test > > > > > > > > = "java:test.Test"; > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > declare function > > > > > > > > test:f() as xs:string { > > > > > > > > > > > > > > > > > > > > > > > > Test::f(Test::INSTANCE()) > > > > > > > > > > > > > > > > }; > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > The build.gradle file is > > > > > > > > simple. It looks something > > > > > > > > like this (removing > > > > > > > > > > > > > > > > things like the junit > > > > > > > > configuration): > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ----- > > > > > > > > > > > > > > > > buildscript { > > > > > > > > > > > > > > > > ext.kotlin_version = > > > > > > > > "1.4.32" > > > > > > > > > > > > > > > > ext.kotlin_stdlib = > > > > > > > > "kotlin-stdlib" > > > > > > > > > > > > > > > > ext.java_version = > > > > > > > > "1.8" > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > repositories { > > > > > > > > mavenCentral() } > > > > > > > > > > > > > > > > dependencies { > > > > > > > > classpath > > > > > > > > > > > > > > > > "org.jetbrains.kotlin:kotlin-gradle-plugin:$kotlin_version" } > > > > > > > > > > > > > > > > } > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > apply plugin: 'kotlin' > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > repositories { > > > > > > > > > > > > > > > > mavenCentral() > > > > > > > > > > > > > > > > mavenLocal() > > > > > > > > > > > > > > > > } > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > compileKotlin { > > > > > > > > kotlinOptions { jvmTarget > > > > > > > > = java_version } } > > > > > > > > > > > > > > > > compileTestKotlin { > > > > > > > > kotlinOptions { jvmTarget > > > > > > > > = java_version } } > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > dependencies { > > > > > > > > > > > > > > > > implementation > > > > > > > > "org.jetbrains.kotlin:$kotlin_stdlib:$kotlin_version" > > > > > > > > > > > > > > > > } > > > > > > > > > > > > > > > > ----- > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > You'll need to copy the > > > > > > > > kotlin-stdlib-1.4.32.jar > > > > > > > > file in addition to the > > > > > > > > > > > > > > > > test.jar file to BaseX's > > > > > > > > lib directory. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Kind regards, > > > > > > > > > > > > > > > > Reece > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Fri, 30 Apr 2021 at > > > > > > > > 07:48, Christian Gr?n <christian.gruen at gmail.com> > > > > > > > > > > > > > > > > wrote: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Hi Reece, > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > I?m sorry to hear > > > > > > > > that. Did you build a > > > > > > > > custom JAR file, or do you > > > > > > > > > > > > > > > > > encounter problems > > > > > > > > with the JDK? > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Cheers, > > > > > > > > > > > > > > > > > Christian > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Thu, Apr 29, 2021 > > > > > > > > at 9:48 PM Reece Dunn <msclrhd at googlemail.com> > > > > > > > > wrote: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Hi Christian, > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Thanks for the > > > > > > > > response. Unfortunately, > > > > > > > > I've not been able to get > > > > > > > > the > > > > > > > > > > > > > > > > > reloading working. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Kind regards, > > > > > > > > > > > > > > > > > > Reece > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Wed, 21 Apr > > > > > > > > 2021 at 18:49, Christian > > > > > > > > Gr?n <christian.gruen at gmail.com> > > > > > > > > > > > > > > > > > wrote: > > > > > > > > > > > > > > > > > >> > > > > > > > > > > > > > > > > > >> Hi Reece, > > > > > > > > > > > > > > > > > >> > > > > > > > > > > > > > > > > > >> If you > > > > > > > > install your Java code as > > > > > > > > JAR file in the repository > > > > > > > > [1], the > > > > > > > > > > > > > > > > > >> code will be > > > > > > > > loaded and unloaded every > > > > > > > > time when your query is > > > > > > > > > > > > > > > > > >> executed. If > > > > > > > > you get an error message? > > > > > > > > > > > > > > > > > >> > > > > > > > > > > > > > > > > > >> > > > > > > > > java.lang.reflect.InaccessibleObjectException: > > > > > > > > Unable to make field > > > > > > > > > > > > > > > > > >> private > > > > > > > > final > > > > > > > > jdk.internal.loader.URLClassPath > > > > > > > > > > > > > > > > > >> > > > > > > > > java.net.URLClassLoader.ucp > > > > > > > > accessible: module > > > > > > > > java.base does not > > > > > > > > > > > > > > > > > >> "opens java.net" > > > > > > > > to unnamed module > > > > > > > > @79e2c065 > > > > > > > > > > > > > > > > > >> > > > > > > > > > > > > > > > > > >> ?unloading > > > > > > > > fails [2], as you?re > > > > > > > > probably using a more > > > > > > > > recent version > > > > > > > > > > > > > > > > > >> of the JDK, > > > > > > > > which restricts reflective > > > > > > > > access to internal > > > > > > > > variables. > > > > > > > > > > > > > > > > > >> You can get > > > > > > > > around this by adding Java > > > > > > > > flags at startup time: > > > > > > > > > > > > > > > > > >> > > > > > > > > > > > > > > > > > >> --add-opens > > > > > > > > java.base/java.net=ALL-UNNAMED > > > > > > > > > > > > > > > > > >> --add-opens > > > > > > > > java.base/jdk.internal.loader=ALL-UNNAMED > > > > > > > > > > > > > > > > > >> > > > > > > > > > > > > > > > > > >> Maybe there > > > > > > > > are better solutions to > > > > > > > > unload JAR files today. > > > > > > > > > > > > > > > > > >> Suggestions > > > > > > > > are welcome! > > > > > > > > > > > > > > > > > >> > > > > > > > > > > > > > > > > > >> Hope this > > > > > > > > helps, > > > > > > > > > > > > > > > > > >> Christian > > > > > > > > > > > > > > > > > >> > > > > > > > > > > > > > > > > > >> [1] https://docs.basex.org/wiki/Repository#Java > > > > > > > > > > > > > > > > > >> [2] > > > > > > > > > > > > > > > > > https://github.com/BaseXdb/basex/blob/master/basex-core/src/main/java/org/basex/util/JarLoader.java#L34 > > > > > > > > > > > > > > > > > >> > > > > > > > > > > > > > > > > > >> > > > > > > > > > > > > > > > > > >> > > > > > > > > > > > > > > > > > >> On Tue, Apr > > > > > > > > 20, 2021 at 6:44 PM Reece > > > > > > > > Dunn <msclrhd at googlemail.com> > > > > > > > > > > > > > > > > > wrote: > > > > > > > > > > > > > > > > > >> > > > > > > > > > > > > > > > > > > >> > Hi all, > > > > > > > > > > > > > > > > > >> > > > > > > > > > > > > > > > > > > >> > I'm > > > > > > > > working on a Java class > > > > > > > > that I'm importing into an > > > > > > > > XQuery, so I > > > > > > > > > > > > > > > > > can do additional > > > > > > > > processing on the data > > > > > > > > that isn't easily > > > > > > > > expressible in > > > > > > > > > > > > > > > > > XQuery (or XSLT). In > > > > > > > > order to get BaseX to pick > > > > > > > > up a modified version of > > > > > > > > > > > > > > > > > the jar file I'm > > > > > > > > building, I'm restarting > > > > > > > > the BaseX http server. > > > > > > > > > > > > > > > > > >> > > > > > > > > > > > > > > > > > > >> > This > > > > > > > > makes it slower to turn > > > > > > > > around testing the > > > > > > > > changes. Is there a > > > > > > > > > > > > > > > > > better way of doing > > > > > > > > this? > > > > > > > > > > > > > > > > > >> > > > > > > > > > > > > > > > > > > >> > Kind > > > > > > > > regards, > > > > > > > > > > > > > > > > > >> > Reece > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > -------------- next part > > > > > > > > -------------- > > > > > > > > > > > > > > > > An HTML attachment was > > > > > > > > scrubbed... > > > > > > > > > > > > > > > > URL: <http://mailman.uni-konstanz.de/pipermail/basex-talk/attachments/20210430/1b9943e9/attachment-0001.htm> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ------------------------------ > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Message: 8 > > > > > > > > > > > > > > > > Date: Fri, 30 Apr 2021 > > > > > > > > 09:30:17 +0200 > > > > > > > > > > > > > > > > From: Christian Gr?n <christian.gruen at gmail.com> > > > > > > > > > > > > > > > > To: Reece Dunn <msclrhd at googlemail.com> > > > > > > > > > > > > > > > > Cc: BaseX <basex-talk at mailman.uni-konstanz.de> > > > > > > > > > > > > > > > > Subject: Re: [basex-talk] > > > > > > > > Reloading jars on a > > > > > > > > running http server. > > > > > > > > > > > > > > > > Message-ID: > > > > > > > > > > > > > > > > > > > > > > > > <CAP94bnN5QnMVBoaNzAL8WOuUo7N8MDYbM4+z=3fTqdn_eUVyZg at mail.gmail.com> > > > > > > > > > > > > > > > > Content-Type: text/plain; > > > > > > > > charset="UTF-8" > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Hi Reece, > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > You'll need to copy > > > > > > > > the > > > > > > > > kotlin-stdlib-1.4.32.jar > > > > > > > > file in addition to the > > > > > > > > test.jar file to BaseX's > > > > > > > > lib directory. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Please note that JAR > > > > > > > > libraries will only be > > > > > > > > unregistered after query > > > > > > > > > > > > > > > > evalution if they are > > > > > > > > moved into the repo > > > > > > > > directory. If a library is > > > > > > > > > > > > > > > > copied into the lib > > > > > > > > directory, it will be > > > > > > > > added to the static > > > > > > > > > > > > > > > > classpath. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > In the given case, you > > > > > > > > could probably keep > > > > > > > > kotlin-stdlib-1.4.32.jar > > > > > > > > in > > > > > > > > > > > > > > > > the lib directory, but > > > > > > > > you?ll need to keep your > > > > > > > > development code in > > > > > > > > > > > > > > > > the repository (as > > > > > > > > described in the Wiki). > > > > > > > > It?s no problem, though, > > > > > > > > to > > > > > > > > > > > > > > > > directly modify the repo > > > > > > > > code (you don?t have to > > > > > > > > use REPO INSTALL or > > > > > > > > > > > > > > > > repo:install for that). > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > If the problem persists, > > > > > > > > feel free to send me a > > > > > > > > little test.jar, I can > > > > > > > > > > > > > > > > then do further testing. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Hope this helps, > > > > > > > > > > > > > > > > Christian > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Fri, Apr 30, 2021 at > > > > > > > > 9:14 AM Reece Dunn <msclrhd at googlemail.com> > > > > > > > > wrote: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Hi Christian, > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > I'm not seeing any > > > > > > > > exceptions in the console > > > > > > > > window, even when enabling > > > > > > > > the debug setting. I'm > > > > > > > > using the AdoptOpenJDK > > > > > > > > 1.8. I also have > > > > > > > > AdoptOpenJDK 11, but I > > > > > > > > assume that will have the > > > > > > > > issue you described. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > It's a custom-built > > > > > > > > jar using Kotlin, built > > > > > > > > via gradle. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > One thing that it > > > > > > > > could be is that I'm using > > > > > > > > Kotlin objects (not > > > > > > > > classes), e.g.: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > package test > > > > > > > > > > > > > > > > > object Test { fun > > > > > > > > f(): String = "test" } > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > and using it like: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > declare namespace > > > > > > > > Test = "java:test.Test"; > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > declare function > > > > > > > > test:f() as xs:string { > > > > > > > > > > > > > > > > > > > > > > > > > Test::f(Test::INSTANCE()) > > > > > > > > > > > > > > > > > }; > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > The build.gradle file > > > > > > > > is simple. It looks > > > > > > > > something like this > > > > > > > > (removing things like the > > > > > > > > junit configuration): > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ----- > > > > > > > > > > > > > > > > > buildscript { > > > > > > > > > > > > > > > > > > > > > > > > > ext.kotlin_version = > > > > > > > > "1.4.32" > > > > > > > > > > > > > > > > > ext.kotlin_stdlib > > > > > > > > = "kotlin-stdlib" > > > > > > > > > > > > > > > > > ext.java_version > > > > > > > > = "1.8" > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > repositories { > > > > > > > > mavenCentral() } > > > > > > > > > > > > > > > > > dependencies { > > > > > > > > classpath > > > > > > > > "org.jetbrains.kotlin:kotlin-gradle-plugin:$kotlin_version" > > > > > > > > } > > > > > > > > > > > > > > > > > } > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > apply plugin: > > > > > > > > 'kotlin' > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > repositories { > > > > > > > > > > > > > > > > > mavenCentral() > > > > > > > > > > > > > > > > > mavenLocal() > > > > > > > > > > > > > > > > > } > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > compileKotlin { > > > > > > > > kotlinOptions { jvmTarget > > > > > > > > = java_version } } > > > > > > > > > > > > > > > > > compileTestKotlin { > > > > > > > > kotlinOptions { jvmTarget > > > > > > > > = java_version } } > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > dependencies { > > > > > > > > > > > > > > > > > implementation > > > > > > > > "org.jetbrains.kotlin:$kotlin_stdlib:$kotlin_version" > > > > > > > > > > > > > > > > > } > > > > > > > > > > > > > > > > > ----- > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > You'll need to copy > > > > > > > > the > > > > > > > > kotlin-stdlib-1.4.32.jar > > > > > > > > file in addition to the > > > > > > > > test.jar file to BaseX's > > > > > > > > lib directory. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Kind regards, > > > > > > > > > > > > > > > > > Reece > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Fri, 30 Apr 2021 > > > > > > > > at 07:48, Christian Gr?n > > > > > > > > <christian.gruen at gmail.com> > > > > > > > > wrote: > > > > > > > > > > > > > > > > >> > > > > > > > > > > > > > > > > >> Hi Reece, > > > > > > > > > > > > > > > > >> > > > > > > > > > > > > > > > > >> I?m sorry to hear > > > > > > > > that. Did you build a > > > > > > > > custom JAR file, or do you > > > > > > > > > > > > > > > > >> encounter > > > > > > > > problems with the JDK? > > > > > > > > > > > > > > > > >> > > > > > > > > > > > > > > > > >> Cheers, > > > > > > > > > > > > > > > > >> Christian > > > > > > > > > > > > > > > > >> > > > > > > > > > > > > > > > > >> > > > > > > > > > > > > > > > > >> > > > > > > > > > > > > > > > > >> On Thu, Apr 29, > > > > > > > > 2021 at 9:48 PM Reece Dunn > > > > > > > > <msclrhd at googlemail.com> > > > > > > > > wrote: > > > > > > > > > > > > > > > > >> > > > > > > > > > > > > > > > > > >> > Hi > > > > > > > > Christian, > > > > > > > > > > > > > > > > >> > > > > > > > > > > > > > > > > > >> > Thanks for > > > > > > > > the response. > > > > > > > > Unfortunately, I've not > > > > > > > > been able to get the > > > > > > > > reloading working. > > > > > > > > > > > > > > > > >> > > > > > > > > > > > > > > > > > >> > Kind > > > > > > > > regards, > > > > > > > > > > > > > > > > >> > Reece > > > > > > > > > > > > > > > > >> > > > > > > > > > > > > > > > > > >> > On Wed, 21 > > > > > > > > Apr 2021 at 18:49, > > > > > > > > Christian Gr?n <christian.gruen at gmail.com> > > > > > > > > wrote: > > > > > > > > > > > > > > > > >> >> > > > > > > > > > > > > > > > > >> >> Hi > > > > > > > > Reece, > > > > > > > > > > > > > > > > >> >> > > > > > > > > > > > > > > > > >> >> If you > > > > > > > > install your Java code as > > > > > > > > JAR file in the repository > > > > > > > > [1], the > > > > > > > > > > > > > > > > >> >> code > > > > > > > > will be loaded and > > > > > > > > unloaded every time when > > > > > > > > your query is > > > > > > > > > > > > > > > > >> >> > > > > > > > > executed. If you get an > > > > > > > > error message? > > > > > > > > > > > > > > > > >> >> > > > > > > > > > > > > > > > > >> >> > > > > > > > > java.lang.reflect.InaccessibleObjectException: > > > > > > > > Unable to make field > > > > > > > > > > > > > > > > >> >> private > > > > > > > > final > > > > > > > > jdk.internal.loader.URLClassPath > > > > > > > > > > > > > > > > >> >> > > > > > > > > java.net.URLClassLoader.ucp > > > > > > > > accessible: module > > > > > > > > java.base does not > > > > > > > > > > > > > > > > >> >> "opens java.net" > > > > > > > > to unnamed module > > > > > > > > @79e2c065 > > > > > > > > > > > > > > > > >> >> > > > > > > > > > > > > > > > > >> >> > > > > > > > > ?unloading fails [2], as > > > > > > > > you?re probably using a > > > > > > > > more recent version > > > > > > > > > > > > > > > > >> >> of the > > > > > > > > JDK, which restricts > > > > > > > > reflective access to > > > > > > > > internal variables. > > > > > > > > > > > > > > > > >> >> You can > > > > > > > > get around this by adding > > > > > > > > Java flags at startup > > > > > > > > time: > > > > > > > > > > > > > > > > >> >> > > > > > > > > > > > > > > > > >> >> > > > > > > > > --add-opens java.base/java.net=ALL-UNNAMED > > > > > > > > > > > > > > > > >> >> > > > > > > > > --add-opens > > > > > > > > java.base/jdk.internal.loader=ALL-UNNAMED > > > > > > > > > > > > > > > > >> >> > > > > > > > > > > > > > > > > >> >> Maybe > > > > > > > > there are better solutions > > > > > > > > to unload JAR files today. > > > > > > > > > > > > > > > > >> >> > > > > > > > > Suggestions are welcome! > > > > > > > > > > > > > > > > >> >> > > > > > > > > > > > > > > > > >> >> Hope > > > > > > > > this helps, > > > > > > > > > > > > > > > > >> >> > > > > > > > > Christian > > > > > > > > > > > > > > > > >> >> > > > > > > > > > > > > > > > > >> >> [1] https://docs.basex.org/wiki/Repository#Java > > > > > > > > > > > > > > > > >> >> [2] https://github.com/BaseXdb/basex/blob/master/basex-core/src/main/java/org/basex/util/JarLoader.java#L34 > > > > > > > > > > > > > > > > >> >> > > > > > > > > > > > > > > > > >> >> > > > > > > > > > > > > > > > > >> >> > > > > > > > > > > > > > > > > >> >> On Tue, > > > > > > > > Apr 20, 2021 at 6:44 PM > > > > > > > > Reece Dunn <msclrhd at googlemail.com> > > > > > > > > wrote: > > > > > > > > > > > > > > > > >> >> > > > > > > > > > > > > > > > > > >> >> > Hi > > > > > > > > all, > > > > > > > > > > > > > > > > >> >> > > > > > > > > > > > > > > > > > >> >> > I'm > > > > > > > > working on a Java class > > > > > > > > that I'm importing into an > > > > > > > > XQuery, so I can do > > > > > > > > additional processing on > > > > > > > > the data that isn't easily > > > > > > > > expressible in XQuery (or > > > > > > > > XSLT). In order to get > > > > > > > > BaseX to pick up a > > > > > > > > modified version of the > > > > > > > > jar file I'm building, I'm > > > > > > > > restarting the BaseX http > > > > > > > > server. > > > > > > > > > > > > > > > > >> >> > > > > > > > > > > > > > > > > > >> >> > > > > > > > > > This makes it slower to > > > > > > > > turn around testing the > > > > > > > > changes. Is there a better > > > > > > > > way of doing this? > > > > > > > > > > > > > > > > >> >> > > > > > > > > > > > > > > > > > >> >> > > > > > > > > > Kind regards, > > > > > > > > > > > > > > > > >> >> > > > > > > > > > Reece > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ------------------------------ > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Message: 9 > > > > > > > > > > > > > > > > Date: Fri, 30 Apr 2021 > > > > > > > > 09:37:14 +0200 > > > > > > > > > > > > > > > > From: Marco Lettere <m.lettere at gmail.com> > > > > > > > > > > > > > > > > To: basex-talk at mailman.uni-konstanz.de > > > > > > > > > > > > > > > > Subject: Re: [basex-talk] > > > > > > > > Make use of external > > > > > > > > Identity Management for > > > > > > > > > > > > > > > > BaseX > > > > > > > > > > > > > > > > Message-ID: <1a8d807b-9cb3-3cd4-f1b7-22aff5446154 at gmail.com> > > > > > > > > > > > > > > > > Content-Type: text/plain; > > > > > > > > charset=utf-8; > > > > > > > > format=flowed > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Hi Christian and Rob, > > > > > > > > > > > > > > > > as the authors of the code > > > > > > > > you point to we confirm > > > > > > > > that interacting with > > > > > > > > > > > > > > > > Keycloak in XQuery and in > > > > > > > > particular RestXQ is > > > > > > > > rather comfortable. > > > > > > > > > > > > > > > > That example is mostly a > > > > > > > > demonstration code for a > > > > > > > > tool that scrapes a > > > > > > > > > > > > > > > > site index and registers > > > > > > > > sites named gateways as > > > > > > > > public clients (in > > > > > > > > > > > > > > > > Oauth2 sense) into a > > > > > > > > Keycloak instance. > > > > > > > > > > > > > > > > It is a proof of concept > > > > > > > > (as you can see from the > > > > > > > > credentials? :-D) that > > > > > > > > > > > > > > > > has been used as a batch > > > > > > > > one-time migration in a > > > > > > > > particular setting. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > We have also a RestXQ > > > > > > > > module that in combination > > > > > > > > with basex:perm > > > > > > > > > > > > > > > > annotations protects > > > > > > > > access to a GUI > > > > > > > > implementing the Oauth2 > > > > > > > > Code-grant > > > > > > > > > > > > > > > > flow. If Rob is interested > > > > > > > > we could share. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > If there should be any > > > > > > > > plan of integrating > > > > > > > > Oauth2/OIDC flows more > > > > > > > > > > > > > > > > tightly into BaseX we > > > > > > > > could also be available > > > > > > > > for helping out. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Regards, > > > > > > > > > > > > > > > > Marco. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On 30/04/21 08:47, > > > > > > > > Christian Gr?n wrote: > > > > > > > > > > > > > > > > > Hi Rob, > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > There is no > > > > > > > > prepackaged module for > > > > > > > > Keycloak (at least I?m > > > > > > > > aware of > > > > > > > > > > > > > > > > > none), but you can > > > > > > > > write your own code with > > > > > > > > XQuery. See [1] for an > > > > > > > > > > > > > > > > > example how this > > > > > > > > might look like. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Are you using RESTXQ? > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Best, > > > > > > > > > > > > > > > > > Christian > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > [1] https://code-repo.d4science.org/gCubeSystem/d4science-keycloak-themes/src/branch/master/src/utils/xquery > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Thu, Apr 29, 2021 > > > > > > > > at 3:54 PM Rob <private at tjalma.com> > > > > > > > > wrote: > > > > > > > > > > > > > > > > >> Hi, > > > > > > > > > > > > > > > > >> > > > > > > > > > > > > > > > > >> I have a > > > > > > > > question. > > > > > > > > > > > > > > > > >> Can BaseX make > > > > > > > > use of an Identity > > > > > > > > Management application > > > > > > > > like Keycloak for Users? > > > > > > > > > > > > > > > > >> > > > > > > > > > > > > > > > > >> I can?t find > > > > > > > > anything about it :) > > > > > > > > > > > > > > > > >> > > > > > > > > > > > > > > > > >> With kind > > > > > > > > regards, > > > > > > > > > > > > > > > > >> Rob Tjalma > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > End of BaseX-Talk Digest, > > > > > > > > Vol 136, Issue 17 > > > > > > > > > > > > > > > > ******************************************* > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >