Problems connecting to the database

> java -cp BaseX6.jar org.basex.BaseXServer -p 7000 > > To set up a server listening on port 7000. And i says "BaseX 6.0 > [server] \n Server was started" and not as it says in the guide > "Waiting for requests...", is that a problem?

> java -cp BaseX6.jar org.basex.BaseXClient -s [ip on my server] -p 7000 > > to try connecting, but then it just displays the help message and are > not doing anything. I am expecting a new console where I where able to > write commands to my baseX server, is that not the intention?

> wow, this where a quick response :)

>> Hm, didn't experience this before; have you tried BaseX on another >> machine, or user other ports? > > Tried it on my pc and on the server, same result. > >> By the help of your mail, I noticed that our documentation was >> out-of-dated; you need to specify -n instead -s (or try -h for help). >> I've updated our docs. Next, just to get sure, verify if port 7000 is >> opened on your server machine. > > Thank you for that, found out port 7000 where not open by default, and > corrected that. > > With no change in the BaseXServer behavior, I where expecting som sort > of console to controle the server with, but that will not happen?

> I solved another problem I got an now the Client code ask for login > and password, but now it just times out every time I try to log on.

> When I am logging on I am able to use the default admin/admin > login/password right? > My CentOS server, where the BaseX server is, have a password for every > user but If I have opened the port I dont need to go through any proxy > there, I just use admin/admin?

> > ~DWP > > 2010/3/26 Christian Grün <christian.gruen at gmail.com>: >> Hi, >> >>> java -cp BaseX6.jar org.basex.BaseXServer -p 7000 >>> >>> To set up a server listening on port 7000. And i says "BaseX 6.0 >>> [server] \n Server was started" and not as it says in the guide >>> "Waiting for requests...", is that a problem? >> >> Hm, didn't experience this before; have you tried BaseX on another >> machine, or user other ports? >> >> >>> java -cp BaseX6.jar org.basex.BaseXClient -s [ip on my server] -p 7000 >>> >>> to try connecting, but then it just displays the help message and are >>> not doing anything. I am expecting a new console where I where able to >>> write commands to my baseX server, is that not the intention? >> >> By the help of your mail, I noticed that our documentation was >> out-of-dated; you need to specify -n instead -s (or try -h for help). >> I've updated our docs. Next, just to get sure, verify if port 7000 is >> opened on your server machine. >> >> Christian

> So you're getting a "Timeout exceeded." message? Hm, this would > indicate that the server isn't reachable. Are you sure the ports are > opened and available?

On Fri, Mar 26, 2010 at 9:34 PM, Daniel .Petersen <superDACAL at hotmail.com> wrote: > Hay again. > > Sorry all, forgot to cc to the mailing list before. > >> So you're getting a "Timeout exceeded." message? Hm, this would >> indicate that the server isn't reachable. Are you sure the ports are >> opened and available? > > Yes I get a timeout exceeded message when I try to connect with my > client from my PC to the server, using standard admin/admin login. > > Now I have tried to nmap from both the server and my pc on port 7000 > and it is open and used for a "afs3-fileserver" service, is that a > correct setup when the BaseX server is running on port 7000? > > Thank you fro your quick responses uptill now :) > > ~DWP >

On Sat, Mar 27, 2010 at 11:24 PM, Daniel .Petersen <superDACAL at hotmail.com> wrote: > hmm... If I use the 1984 port and scan with nmap the service is called > "bigBrother" now instead of "asf3-fileserver", but the clients > behavior is unchanged.

> Hm… I'm sorry I have no idea what could be the matter. Maybe someone > else out there has some clue? > > On Sat, Mar 27, 2010 at 11:24 PM, Daniel .Petersen > <superDACAL at hotmail.com> wrote: >> hmm... If I use the 1984 port and scan with nmap the service is called >> "bigBrother" now instead of "asf3-fileserver", but the clients >> behavior is unchanged. > _______________________________________________ > BaseX-Talk mailing list > BaseX-Talk at mailman.uni-konstanz.de > https://mailman.uni-konstanz.de/mailman/listinfo/basex-talk >

> "bigBrother" now instead of "asf3-fileserver"

Daniel .Petersen schrieb: > Hay again > > tried to do everything over once more and now I get another error message > > "Can't communicate with the server"-error > > There are no change in behavior yet, exept that. > > 2010/3/28 Christian Grün <christian.gruen at gmail.com>: > >> Hm… I'm sorry I have no idea what could be the matter. Maybe someone >> else out there has some clue? >> >> On Sat, Mar 27, 2010 at 11:24 PM, Daniel .Petersen >> <superDACAL at hotmail.com> wrote: >> >>> hmm... If I use the 1984 port and scan with nmap the service is called >>> "bigBrother" now instead of "asf3-fileserver", but the clients >>> behavior is unchanged. >>> >> _______________________________________________ >> BaseX-Talk mailing list >> BaseX-Talk at mailman.uni-konstanz.de >> https://mailman.uni-konstanz.de/mailman/listinfo/basex-talk >> >> > _______________________________________________ > BaseX-Talk mailing list > BaseX-Talk at mailman.uni-konstanz.de > https://mailman.uni-konstanz.de/mailman/listinfo/basex-talk >

> Hi Daniel, > >> "bigBrother" now instead of "asf3-fileserver" > > i just checked it with nmap on my machine, and it says exactly the same as > yours. (with BaseX Server running and without) > So dont give a lot on these results. > > If you can connect local to the BaseXServer with just specify the port like: > > java -cp BaseX6.jar org.basex.BaseXServer -p 1984 > > java -cp BaseX6.jar org.basex.BaseXClient -p 1984 > > and not remote like: > > java -cp BaseX6.jar org.basex.BaseXClient -n host -p 1984 > > Then your server is wrongly configured, please check that first. > > Kind regards, > Andreas, BaseX Team > > Daniel .Petersen schrieb: >> >> Hay again >> >> tried to do everything over once more and now I get another error message >> >> "Can't communicate with the server"-error >> >> There are no change in behavior yet, exept that. >> >> 2010/3/28 Christian Grün <christian.gruen at gmail.com>: >> >>> >>> Hm… I'm sorry I have no idea what could be the matter. Maybe someone >>> else out there has some clue? >>> >>> On Sat, Mar 27, 2010 at 11:24 PM, Daniel .Petersen >>> <superDACAL at hotmail.com> wrote: >>> >>>> >>>> hmm... If I use the 1984 port and scan with nmap the service is called >>>> "bigBrother" now instead of "asf3-fileserver", but the clients >>>> behavior is unchanged. >>>> >>> >>> _______________________________________________ >>> BaseX-Talk mailing list >>> BaseX-Talk at mailman.uni-konstanz.de >>> https://mailman.uni-konstanz.de/mailman/listinfo/basex-talk >>> >>> >> >> _______________________________________________ >> BaseX-Talk mailing list >> BaseX-Talk at mailman.uni-konstanz.de >> https://mailman.uni-konstanz.de/mailman/listinfo/basex-talk >> > > _______________________________________________ > BaseX-Talk mailing list > BaseX-Talk at mailman.uni-konstanz.de > https://mailman.uni-konstanz.de/mailman/listinfo/basex-talk >

Daniel .Petersen schrieb: > I am able to connect to the server locally using the commands you posted. > > 2010/3/29 Andreas Weiler <andreas.weiler at uni-konstanz.de>: > >> Hi Daniel, >> >> >>> "bigBrother" now instead of "asf3-fileserver" >>> >> i just checked it with nmap on my machine, and it says exactly the same as >> yours. (with BaseX Server running and without) >> So dont give a lot on these results. >> >> If you can connect local to the BaseXServer with just specify the port like: >> >> java -cp BaseX6.jar org.basex.BaseXServer -p 1984 >> >> java -cp BaseX6.jar org.basex.BaseXClient -p 1984 >> >> and not remote like: >> >> java -cp BaseX6.jar org.basex.BaseXClient -n host -p 1984 >> >> Then your server is wrongly configured, please check that first. >> >> Kind regards, >> Andreas, BaseX Team >> >> Daniel .Petersen schrieb: >> >>> Hay again >>> >>> tried to do everything over once more and now I get another error message >>> >>> "Can't communicate with the server"-error >>> >>> There are no change in behavior yet, exept that. >>> >>> 2010/3/28 Christian Grün <christian.gruen at gmail.com>: >>> >>> >>>> Hm… I'm sorry I have no idea what could be the matter. Maybe someone >>>> else out there has some clue? >>>> >>>> On Sat, Mar 27, 2010 at 11:24 PM, Daniel .Petersen >>>> <superDACAL at hotmail.com> wrote: >>>> >>>> >>>>> hmm... If I use the 1984 port and scan with nmap the service is called >>>>> "bigBrother" now instead of "asf3-fileserver", but the clients >>>>> behavior is unchanged. >>>>> >>>>> >>>> _______________________________________________ >>>> BaseX-Talk mailing list >>>> BaseX-Talk at mailman.uni-konstanz.de >>>> https://mailman.uni-konstanz.de/mailman/listinfo/basex-talk >>>> >>>> >>>> >>> _______________________________________________ >>> BaseX-Talk mailing list >>> BaseX-Talk at mailman.uni-konstanz.de >>> https://mailman.uni-konstanz.de/mailman/listinfo/basex-talk >>> >>> >> _______________________________________________ >> BaseX-Talk mailing list >> BaseX-Talk at mailman.uni-konstanz.de >> https://mailman.uni-konstanz.de/mailman/listinfo/basex-talk >> >>

> So i guess it's a security problem. > I just checked it by myself on a remote server and i didnt get any problem. > So i just can give your following advices: > Please make sure Java is not blocked from the firewalls on both machines and > check if the port is open and the hostname or hostip is the right one. > > Daniel .Petersen schrieb: >> >> I am able to connect to the server locally using the commands you posted. >> >> 2010/3/29 Andreas Weiler <andreas.weiler at uni-konstanz.de>: >> >>> >>> Hi Daniel, >>> >>> >>>> >>>> "bigBrother" now instead of "asf3-fileserver" >>>> >>> >>> i just checked it with nmap on my machine, and it says exactly the same >>> as >>> yours. (with BaseX Server running and without) >>> So dont give a lot on these results. >>> >>> If you can connect local to the BaseXServer with just specify the port >>> like: >>> >>> java -cp BaseX6.jar org.basex.BaseXServer -p 1984 >>> >>> java -cp BaseX6.jar org.basex.BaseXClient -p 1984 >>> >>> and not remote like: >>> >>> java -cp BaseX6.jar org.basex.BaseXClient -n host -p 1984 >>> >>> Then your server is wrongly configured, please check that first. >>> >>> Kind regards, >>> Andreas, BaseX Team >>> >>> Daniel .Petersen schrieb: >>> >>>> >>>> Hay again >>>> >>>> tried to do everything over once more and now I get another error >>>> message >>>> >>>> "Can't communicate with the server"-error >>>> >>>> There are no change in behavior yet, exept that. >>>> >>>> 2010/3/28 Christian Grün <christian.gruen at gmail.com>: >>>> >>>> >>>>> >>>>> Hm… I'm sorry I have no idea what could be the matter. Maybe someone >>>>> else out there has some clue? >>>>> >>>>> On Sat, Mar 27, 2010 at 11:24 PM, Daniel .Petersen >>>>> <superDACAL at hotmail.com> wrote: >>>>> >>>>> >>>>>> >>>>>> hmm... If I use the 1984 port and scan with nmap the service is called >>>>>> "bigBrother" now instead of "asf3-fileserver", but the clients >>>>>> behavior is unchanged. >>>>>> >>>>>> >>>>> >>>>> _______________________________________________ >>>>> BaseX-Talk mailing list >>>>> BaseX-Talk at mailman.uni-konstanz.de >>>>> https://mailman.uni-konstanz.de/mailman/listinfo/basex-talk >>>>> >>>>> >>>>> >>>> >>>> _______________________________________________ >>>> BaseX-Talk mailing list >>>> BaseX-Talk at mailman.uni-konstanz.de >>>> https://mailman.uni-konstanz.de/mailman/listinfo/basex-talk >>>> >>>> >>> >>> _______________________________________________ >>> BaseX-Talk mailing list >>> BaseX-Talk at mailman.uni-konstanz.de >>> https://mailman.uni-konstanz.de/mailman/listinfo/basex-talk >>> >>> > > _______________________________________________ > BaseX-Talk mailing list > BaseX-Talk at mailman.uni-konstanz.de > https://mailman.uni-konstanz.de/mailman/listinfo/basex-talk >

Daniel .Petersen schrieb: > I am not getting the "can't comunnicate.."-error more and is back at > the "timeout exception" again, does that make any sense? > > I am quite sure the ip is correct, because I am able to scan for open > ports from my pc and see the same ports are open as if i scan > localhost on the server. > > I have unblogged java on my pc, before I started on this. > > And the server is CentOs and linux do not blog programs like on > windows (if i remember right) and the port are open when i use nmap > both on the server and from my pc. > > 2010/3/29 Andreas Weiler <andreas.weiler at uni-konstanz.de>: > >> So i guess it's a security problem. >> I just checked it by myself on a remote server and i didnt get any problem. >> So i just can give your following advices: >> Please make sure Java is not blocked from the firewalls on both machines and >> check if the port is open and the hostname or hostip is the right one. >> >> Daniel .Petersen schrieb: >> >>> I am able to connect to the server locally using the commands you posted. >>> >>> 2010/3/29 Andreas Weiler <andreas.weiler at uni-konstanz.de>: >>> >>> >>>> Hi Daniel, >>>> >>>> >>>> >>>>> "bigBrother" now instead of "asf3-fileserver" >>>>> >>>>> >>>> i just checked it with nmap on my machine, and it says exactly the same >>>> as >>>> yours. (with BaseX Server running and without) >>>> So dont give a lot on these results. >>>> >>>> If you can connect local to the BaseXServer with just specify the port >>>> like: >>>> >>>> java -cp BaseX6.jar org.basex.BaseXServer -p 1984 >>>> >>>> java -cp BaseX6.jar org.basex.BaseXClient -p 1984 >>>> >>>> and not remote like: >>>> >>>> java -cp BaseX6.jar org.basex.BaseXClient -n host -p 1984 >>>> >>>> Then your server is wrongly configured, please check that first. >>>> >>>> Kind regards, >>>> Andreas, BaseX Team >>>> >>>> Daniel .Petersen schrieb: >>>> >>>> >>>>> Hay again >>>>> >>>>> tried to do everything over once more and now I get another error >>>>> message >>>>> >>>>> "Can't communicate with the server"-error >>>>> >>>>> There are no change in behavior yet, exept that. >>>>> >>>>> 2010/3/28 Christian Grün <christian.gruen at gmail.com>: >>>>> >>>>> >>>>> >>>>>> Hm… I'm sorry I have no idea what could be the matter. Maybe someone >>>>>> else out there has some clue? >>>>>> >>>>>> On Sat, Mar 27, 2010 at 11:24 PM, Daniel .Petersen >>>>>> <superDACAL at hotmail.com> wrote: >>>>>> >>>>>> >>>>>> >>>>>>> hmm... If I use the 1984 port and scan with nmap the service is called >>>>>>> "bigBrother" now instead of "asf3-fileserver", but the clients >>>>>>> behavior is unchanged. >>>>>>> >>>>>>> >>>>>>> >>>>>> _______________________________________________ >>>>>> BaseX-Talk mailing list >>>>>> BaseX-Talk at mailman.uni-konstanz.de >>>>>> https://mailman.uni-konstanz.de/mailman/listinfo/basex-talk >>>>>> >>>>>> >>>>>> >>>>>> >>>>> _______________________________________________ >>>>> BaseX-Talk mailing list >>>>> BaseX-Talk at mailman.uni-konstanz.de >>>>> https://mailman.uni-konstanz.de/mailman/listinfo/basex-talk >>>>> >>>>> >>>>> >>>> _______________________________________________ >>>> BaseX-Talk mailing list >>>> BaseX-Talk at mailman.uni-konstanz.de >>>> https://mailman.uni-konstanz.de/mailman/listinfo/basex-talk >>>> >>>> >>>> >> _______________________________________________ >> BaseX-Talk mailing list >> BaseX-Talk at mailman.uni-konstanz.de >> https://mailman.uni-konstanz.de/mailman/listinfo/basex-talk >> >>

> You could try out to upload the PHP Version: > https://svn.uni-konstanz.de/dbis/basex/trunk/api/etc/php/ > on a webserver and try to connect to your server with the Example.php. > So you could narrow the problem to server or client side. > Sorry for no better adivces, but we haven't encountered the problem before. > > Daniel .Petersen schrieb: >> >> I am not getting the "can't comunnicate.."-error more and is back at >> the "timeout exception" again, does that make any sense? >> >> I am quite sure the ip is correct, because I am able to scan for open >> ports from my pc and see the same ports are open as if i scan >> localhost on the server. >> >> I have unblogged java on my pc, before I started on this. >> >> And the server is CentOs and linux do not blog programs like on >> windows (if i remember right) and the port are open when i use nmap >> both on the server and from my pc. >> >> 2010/3/29 Andreas Weiler <andreas.weiler at uni-konstanz.de>: >> >>> >>> So i guess it's a security problem. >>> I just checked it by myself on a remote server and i didnt get any >>> problem. >>> So i just can give your following advices: >>> Please make sure Java is not blocked from the firewalls on both machines >>> and >>> check if the port is open and the hostname or hostip is the right one. >>> >>> Daniel .Petersen schrieb: >>> >>>> >>>> I am able to connect to the server locally using the commands you >>>> posted. >>>> >>>> 2010/3/29 Andreas Weiler <andreas.weiler at uni-konstanz.de>: >>>> >>>> >>>>> >>>>> Hi Daniel, >>>>> >>>>> >>>>> >>>>>> >>>>>> "bigBrother" now instead of "asf3-fileserver" >>>>>> >>>>>> >>>>> >>>>> i just checked it with nmap on my machine, and it says exactly the same >>>>> as >>>>> yours. (with BaseX Server running and without) >>>>> So dont give a lot on these results. >>>>> >>>>> If you can connect local to the BaseXServer with just specify the port >>>>> like: >>>>> >>>>> java -cp BaseX6.jar org.basex.BaseXServer -p 1984 >>>>> >>>>> java -cp BaseX6.jar org.basex.BaseXClient -p 1984 >>>>> >>>>> and not remote like: >>>>> >>>>> java -cp BaseX6.jar org.basex.BaseXClient -n host -p 1984 >>>>> >>>>> Then your server is wrongly configured, please check that first. >>>>> >>>>> Kind regards, >>>>> Andreas, BaseX Team >>>>> >>>>> Daniel .Petersen schrieb: >>>>> >>>>> >>>>>> >>>>>> Hay again >>>>>> >>>>>> tried to do everything over once more and now I get another error >>>>>> message >>>>>> >>>>>> "Can't communicate with the server"-error >>>>>> >>>>>> There are no change in behavior yet, exept that. >>>>>> >>>>>> 2010/3/28 Christian Grün <christian.gruen at gmail.com>: >>>>>> >>>>>> >>>>>> >>>>>>> >>>>>>> Hm… I'm sorry I have no idea what could be the matter. Maybe someone >>>>>>> else out there has some clue? >>>>>>> >>>>>>> On Sat, Mar 27, 2010 at 11:24 PM, Daniel .Petersen >>>>>>> <superDACAL at hotmail.com> wrote: >>>>>>> >>>>>>> >>>>>>> >>>>>>>> >>>>>>>> hmm... If I use the 1984 port and scan with nmap the service is >>>>>>>> called >>>>>>>> "bigBrother" now instead of "asf3-fileserver", but the clients >>>>>>>> behavior is unchanged. >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>> >>>>>>> _______________________________________________ >>>>>>> BaseX-Talk mailing list >>>>>>> BaseX-Talk at mailman.uni-konstanz.de >>>>>>> https://mailman.uni-konstanz.de/mailman/listinfo/basex-talk >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>> >>>>>> _______________________________________________ >>>>>> BaseX-Talk mailing list >>>>>> BaseX-Talk at mailman.uni-konstanz.de >>>>>> https://mailman.uni-konstanz.de/mailman/listinfo/basex-talk >>>>>> >>>>>> >>>>>> >>>>> >>>>> _______________________________________________ >>>>> BaseX-Talk mailing list >>>>> BaseX-Talk at mailman.uni-konstanz.de >>>>> https://mailman.uni-konstanz.de/mailman/listinfo/basex-talk >>>>> >>>>> >>>>> >>> >>> _______________________________________________ >>> BaseX-Talk mailing list >>> BaseX-Talk at mailman.uni-konstanz.de >>> https://mailman.uni-konstanz.de/mailman/listinfo/basex-talk >>> >>> > > _______________________________________________ > BaseX-Talk mailing list > BaseX-Talk at mailman.uni-konstanz.de > https://mailman.uni-konstanz.de/mailman/listinfo/basex-talk >

Daniel .Petersen schrieb: > I have not used php before, so tell me if I doing it wrong, because i: > > 1) upload the BaseX.php to the server > 2) install php on my pc, and check it works on the server > 3) then i run the "php -f Example.php" command on my pc > > Do I need to do anything else than uplaod the BaseX.php file to the server? > Do I need to start the java BaseXServer up? > > Because I get a "can`t communicate.."-error whenewer I do this. > > 2010/3/29 Andreas Weiler <andreas.weiler at uni-konstanz.de>: > >> You could try out to upload the PHP Version: >> https://svn.uni-konstanz.de/dbis/basex/trunk/api/etc/php/ >> on a webserver and try to connect to your server with the Example.php. >> So you could narrow the problem to server or client side. >> Sorry for no better adivces, but we haven't encountered the problem before. >> >> Daniel .Petersen schrieb: >> >>> I am not getting the "can't comunnicate.."-error more and is back at >>> the "timeout exception" again, does that make any sense? >>> >>> I am quite sure the ip is correct, because I am able to scan for open >>> ports from my pc and see the same ports are open as if i scan >>> localhost on the server. >>> >>> I have unblogged java on my pc, before I started on this. >>> >>> And the server is CentOs and linux do not blog programs like on >>> windows (if i remember right) and the port are open when i use nmap >>> both on the server and from my pc. >>> >>> 2010/3/29 Andreas Weiler <andreas.weiler at uni-konstanz.de>: >>> >>> >>>> So i guess it's a security problem. >>>> I just checked it by myself on a remote server and i didnt get any >>>> problem. >>>> So i just can give your following advices: >>>> Please make sure Java is not blocked from the firewalls on both machines >>>> and >>>> check if the port is open and the hostname or hostip is the right one. >>>> >>>> Daniel .Petersen schrieb: >>>> >>>> >>>>> I am able to connect to the server locally using the commands you >>>>> posted. >>>>> >>>>> 2010/3/29 Andreas Weiler <andreas.weiler at uni-konstanz.de>: >>>>> >>>>> >>>>> >>>>>> Hi Daniel, >>>>>> >>>>>> >>>>>> >>>>>> >>>>>>> "bigBrother" now instead of "asf3-fileserver" >>>>>>> >>>>>>> >>>>>>> >>>>>> i just checked it with nmap on my machine, and it says exactly the same >>>>>> as >>>>>> yours. (with BaseX Server running and without) >>>>>> So dont give a lot on these results. >>>>>> >>>>>> If you can connect local to the BaseXServer with just specify the port >>>>>> like: >>>>>> >>>>>> java -cp BaseX6.jar org.basex.BaseXServer -p 1984 >>>>>> >>>>>> java -cp BaseX6.jar org.basex.BaseXClient -p 1984 >>>>>> >>>>>> and not remote like: >>>>>> >>>>>> java -cp BaseX6.jar org.basex.BaseXClient -n host -p 1984 >>>>>> >>>>>> Then your server is wrongly configured, please check that first. >>>>>> >>>>>> Kind regards, >>>>>> Andreas, BaseX Team >>>>>> >>>>>> Daniel .Petersen schrieb: >>>>>> >>>>>> >>>>>> >>>>>>> Hay again >>>>>>> >>>>>>> tried to do everything over once more and now I get another error >>>>>>> message >>>>>>> >>>>>>> "Can't communicate with the server"-error >>>>>>> >>>>>>> There are no change in behavior yet, exept that. >>>>>>> >>>>>>> 2010/3/28 Christian Grün <christian.gruen at gmail.com>: >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>> Hm… I'm sorry I have no idea what could be the matter. Maybe someone >>>>>>>> else out there has some clue? >>>>>>>> >>>>>>>> On Sat, Mar 27, 2010 at 11:24 PM, Daniel .Petersen >>>>>>>> <superDACAL at hotmail.com> wrote: >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>>> hmm... If I use the 1984 port and scan with nmap the service is >>>>>>>>> called >>>>>>>>> "bigBrother" now instead of "asf3-fileserver", but the clients >>>>>>>>> behavior is unchanged. >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>> _______________________________________________ >>>>>>>> BaseX-Talk mailing list >>>>>>>> BaseX-Talk at mailman.uni-konstanz.de >>>>>>>> https://mailman.uni-konstanz.de/mailman/listinfo/basex-talk >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>> _______________________________________________ >>>>>>> BaseX-Talk mailing list >>>>>>> BaseX-Talk at mailman.uni-konstanz.de >>>>>>> https://mailman.uni-konstanz.de/mailman/listinfo/basex-talk >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>> _______________________________________________ >>>>>> BaseX-Talk mailing list >>>>>> BaseX-Talk at mailman.uni-konstanz.de >>>>>> https://mailman.uni-konstanz.de/mailman/listinfo/basex-talk >>>>>> >>>>>> >>>>>> >>>>>> >>>> _______________________________________________ >>>> BaseX-Talk mailing list >>>> BaseX-Talk at mailman.uni-konstanz.de >>>> https://mailman.uni-konstanz.de/mailman/listinfo/basex-talk >>>> >>>> >>>> >> _______________________________________________ >> BaseX-Talk mailing list >> BaseX-Talk at mailman.uni-konstanz.de >> https://mailman.uni-konstanz.de/mailman/listinfo/basex-talk >> >>

> Hi Daniel, > > you have to do the following: > > 1) Configure the Example.php with your server details. You have to replace > the server name and the port in the Example.php. > 2) Upload the BaseX.php and the Example.php to an available webserver, with > php installed. > 3) Then start the BaseXServer on your server. > 4) Then open with a browser the Example.php on your webserver. Then it > should connect to the BaseXServer and run a query. > > Now the error message or the result of the query is coming up in your > browser. > > Andreas > > Daniel .Petersen schrieb: >> >> I have not used php before, so tell me if I doing it wrong, because i: >> >> 1) upload the BaseX.php to the server >> 2) install php on my pc, and check it works on the server >> 3) then i run the "php -f Example.php" command on my pc >> >> Do I need to do anything else than uplaod the BaseX.php file to the >> server? >> Do I need to start the java BaseXServer up? >> >> Because I get a "can`t communicate.."-error whenewer I do this. >> >> 2010/3/29 Andreas Weiler <andreas.weiler at uni-konstanz.de>: >> >>> >>> You could try out to upload the PHP Version: >>> https://svn.uni-konstanz.de/dbis/basex/trunk/api/etc/php/ >>> on a webserver and try to connect to your server with the Example.php. >>> So you could narrow the problem to server or client side. >>> Sorry for no better adivces, but we haven't encountered the problem >>> before. >>> >>> Daniel .Petersen schrieb: >>> >>>> >>>> I am not getting the "can't comunnicate.."-error more and is back at >>>> the "timeout exception" again, does that make any sense? >>>> >>>> I am quite sure the ip is correct, because I am able to scan for open >>>> ports from my pc and see the same ports are open as if i scan >>>> localhost on the server. >>>> >>>> I have unblogged java on my pc, before I started on this. >>>> >>>> And the server is CentOs and linux do not blog programs like on >>>> windows (if i remember right) and the port are open when i use nmap >>>> both on the server and from my pc. >>>> >>>> 2010/3/29 Andreas Weiler <andreas.weiler at uni-konstanz.de>: >>>> >>>> >>>>> >>>>> So i guess it's a security problem. >>>>> I just checked it by myself on a remote server and i didnt get any >>>>> problem. >>>>> So i just can give your following advices: >>>>> Please make sure Java is not blocked from the firewalls on both >>>>> machines >>>>> and >>>>> check if the port is open and the hostname or hostip is the right one. >>>>> >>>>> Daniel .Petersen schrieb: >>>>> >>>>> >>>>>> >>>>>> I am able to connect to the server locally using the commands you >>>>>> posted. >>>>>> >>>>>> 2010/3/29 Andreas Weiler <andreas.weiler at uni-konstanz.de>: >>>>>> >>>>>> >>>>>> >>>>>>> >>>>>>> Hi Daniel, >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>> >>>>>>>> "bigBrother" now instead of "asf3-fileserver" >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>> >>>>>>> i just checked it with nmap on my machine, and it says exactly the >>>>>>> same >>>>>>> as >>>>>>> yours. (with BaseX Server running and without) >>>>>>> So dont give a lot on these results. >>>>>>> >>>>>>> If you can connect local to the BaseXServer with just specify the >>>>>>> port >>>>>>> like: >>>>>>> >>>>>>> java -cp BaseX6.jar org.basex.BaseXServer -p 1984 >>>>>>> >>>>>>> java -cp BaseX6.jar org.basex.BaseXClient -p 1984 >>>>>>> >>>>>>> and not remote like: >>>>>>> >>>>>>> java -cp BaseX6.jar org.basex.BaseXClient -n host -p 1984 >>>>>>> >>>>>>> Then your server is wrongly configured, please check that first. >>>>>>> >>>>>>> Kind regards, >>>>>>> Andreas, BaseX Team >>>>>>> >>>>>>> Daniel .Petersen schrieb: >>>>>>> >>>>>>> >>>>>>> >>>>>>>> >>>>>>>> Hay again >>>>>>>> >>>>>>>> tried to do everything over once more and now I get another error >>>>>>>> message >>>>>>>> >>>>>>>> "Can't communicate with the server"-error >>>>>>>> >>>>>>>> There are no change in behavior yet, exept that. >>>>>>>> >>>>>>>> 2010/3/28 Christian Grün <christian.gruen at gmail.com>: >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>>> >>>>>>>>> Hm… I'm sorry I have no idea what could be the matter. Maybe >>>>>>>>> someone >>>>>>>>> else out there has some clue? >>>>>>>>> >>>>>>>>> On Sat, Mar 27, 2010 at 11:24 PM, Daniel .Petersen >>>>>>>>> <superDACAL at hotmail.com> wrote: >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>>> >>>>>>>>>> hmm... If I use the 1984 port and scan with nmap the service is >>>>>>>>>> called >>>>>>>>>> "bigBrother" now instead of "asf3-fileserver", but the clients >>>>>>>>>> behavior is unchanged. >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>> >>>>>>>>> _______________________________________________ >>>>>>>>> BaseX-Talk mailing list >>>>>>>>> BaseX-Talk at mailman.uni-konstanz.de >>>>>>>>> https://mailman.uni-konstanz.de/mailman/listinfo/basex-talk >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>> >>>>>>>> _______________________________________________ >>>>>>>> BaseX-Talk mailing list >>>>>>>> BaseX-Talk at mailman.uni-konstanz.de >>>>>>>> https://mailman.uni-konstanz.de/mailman/listinfo/basex-talk >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>> >>>>>>> _______________________________________________ >>>>>>> BaseX-Talk mailing list >>>>>>> BaseX-Talk at mailman.uni-konstanz.de >>>>>>> https://mailman.uni-konstanz.de/mailman/listinfo/basex-talk >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>> >>>>> _______________________________________________ >>>>> BaseX-Talk mailing list >>>>> BaseX-Talk at mailman.uni-konstanz.de >>>>> https://mailman.uni-konstanz.de/mailman/listinfo/basex-talk >>>>> >>>>> >>>>> >>> >>> _______________________________________________ >>> BaseX-Talk mailing list >>> BaseX-Talk at mailman.uni-konstanz.de >>> https://mailman.uni-konstanz.de/mailman/listinfo/basex-talk >>> >>> > > _______________________________________________ > BaseX-Talk mailing list > BaseX-Talk at mailman.uni-konstanz.de > https://mailman.uni-konstanz.de/mailman/listinfo/basex-talk >

> Hay > > I have tried to get this thing working since you wrote, thank you for > your time spent, but I have no experience with .php and servers. And I > got a problem with my browser not connecting. I googled around and > found out you are not able to just browse a server with you internet > browser, but I where not able to find a way to enable that (it is a > CentOS server). > > I know this is not the kind of questions this maillist is here to > answer, but I think this question is so simple in complexity that I > hope you will answer it. I will still google around for the answer > while I wait. > > kind regards DWP > > 2010/3/29 Andreas Weiler <andreas.weiler at uni-konstanz.de>: >> Hi Daniel, >> >> you have to do the following: >> >> 1) Configure the Example.php with your server details. You have to replace >> the server name and the port in the Example.php. >> 2) Upload the BaseX.php and the Example.php to an available webserver, with >> php installed. >> 3) Then start the BaseXServer on your server. >> 4) Then open with a browser the Example.php on your webserver. Then it >> should connect to the BaseXServer and run a query. >> >> Now the error message or the result of the query is coming up in your >> browser. >> >> Andreas >> >> Daniel .Petersen schrieb: >>> >>> I have not used php before, so tell me if I doing it wrong, because i: >>> >>> 1) upload the BaseX.php to the server >>> 2) install php on my pc, and check it works on the server >>> 3) then i run the "php -f Example.php" command on my pc >>> >>> Do I need to do anything else than uplaod the BaseX.php file to the >>> server? >>> Do I need to start the java BaseXServer up? >>> >>> Because I get a "can`t communicate.."-error whenewer I do this. >>> >>> 2010/3/29 Andreas Weiler <andreas.weiler at uni-konstanz.de>: >>> >>>> >>>> You could try out to upload the PHP Version: >>>> https://svn.uni-konstanz.de/dbis/basex/trunk/api/etc/php/ >>>> on a webserver and try to connect to your server with the Example.php. >>>> So you could narrow the problem to server or client side. >>>> Sorry for no better adivces, but we haven't encountered the problem >>>> before. >>>> >>>> Daniel .Petersen schrieb: >>>> >>>>> >>>>> I am not getting the "can't comunnicate.."-error more and is back at >>>>> the "timeout exception" again, does that make any sense? >>>>> >>>>> I am quite sure the ip is correct, because I am able to scan for open >>>>> ports from my pc and see the same ports are open as if i scan >>>>> localhost on the server. >>>>> >>>>> I have unblogged java on my pc, before I started on this. >>>>> >>>>> And the server is CentOs and linux do not blog programs like on >>>>> windows (if i remember right) and the port are open when i use nmap >>>>> both on the server and from my pc. >>>>> >>>>> 2010/3/29 Andreas Weiler <andreas.weiler at uni-konstanz.de>: >>>>> >>>>> >>>>>> >>>>>> So i guess it's a security problem. >>>>>> I just checked it by myself on a remote server and i didnt get any >>>>>> problem. >>>>>> So i just can give your following advices: >>>>>> Please make sure Java is not blocked from the firewalls on both >>>>>> machines >>>>>> and >>>>>> check if the port is open and the hostname or hostip is the right one. >>>>>> >>>>>> Daniel .Petersen schrieb: >>>>>> >>>>>> >>>>>>> >>>>>>> I am able to connect to the server locally using the commands you >>>>>>> posted. >>>>>>> >>>>>>> 2010/3/29 Andreas Weiler <andreas.weiler at uni-konstanz.de>: >>>>>>> >>>>>>> >>>>>>> >>>>>>>> >>>>>>>> Hi Daniel, >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>>> >>>>>>>>> "bigBrother" now instead of "asf3-fileserver" >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>> >>>>>>>> i just checked it with nmap on my machine, and it says exactly the >>>>>>>> same >>>>>>>> as >>>>>>>> yours. (with BaseX Server running and without) >>>>>>>> So dont give a lot on these results. >>>>>>>> >>>>>>>> If you can connect local to the BaseXServer with just specify the >>>>>>>> port >>>>>>>> like: >>>>>>>> >>>>>>>> java -cp BaseX6.jar org.basex.BaseXServer -p 1984 >>>>>>>> >>>>>>>> java -cp BaseX6.jar org.basex.BaseXClient -p 1984 >>>>>>>> >>>>>>>> and not remote like: >>>>>>>> >>>>>>>> java -cp BaseX6.jar org.basex.BaseXClient -n host -p 1984 >>>>>>>> >>>>>>>> Then your server is wrongly configured, please check that first. >>>>>>>> >>>>>>>> Kind regards, >>>>>>>> Andreas, BaseX Team >>>>>>>> >>>>>>>> Daniel .Petersen schrieb: >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>>> >>>>>>>>> Hay again >>>>>>>>> >>>>>>>>> tried to do everything over once more and now I get another error >>>>>>>>> message >>>>>>>>> >>>>>>>>> "Can't communicate with the server"-error >>>>>>>>> >>>>>>>>> There are no change in behavior yet, exept that. >>>>>>>>> >>>>>>>>> 2010/3/28 Christian Grün <christian.gruen at gmail.com>: >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>>> >>>>>>>>>> Hm… I'm sorry I have no idea what could be the matter. Maybe >>>>>>>>>> someone >>>>>>>>>> else out there has some clue? >>>>>>>>>> >>>>>>>>>> On Sat, Mar 27, 2010 at 11:24 PM, Daniel .Petersen >>>>>>>>>> <superDACAL at hotmail.com> wrote: >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> hmm... If I use the 1984 port and scan with nmap the service is >>>>>>>>>>> called >>>>>>>>>>> "bigBrother" now instead of "asf3-fileserver", but the clients >>>>>>>>>>> behavior is unchanged. >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>> >>>>>>>>>> _______________________________________________ >>>>>>>>>> BaseX-Talk mailing list >>>>>>>>>> BaseX-Talk at mailman.uni-konstanz.de >>>>>>>>>> https://mailman.uni-konstanz.de/mailman/listinfo/basex-talk >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>> >>>>>>>>> _______________________________________________ >>>>>>>>> BaseX-Talk mailing list >>>>>>>>> BaseX-Talk at mailman.uni-konstanz.de >>>>>>>>> https://mailman.uni-konstanz.de/mailman/listinfo/basex-talk >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>> >>>>>>>> _______________________________________________ >>>>>>>> BaseX-Talk mailing list >>>>>>>> BaseX-Talk at mailman.uni-konstanz.de >>>>>>>> https://mailman.uni-konstanz.de/mailman/listinfo/basex-talk >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>> >>>>>> _______________________________________________ >>>>>> BaseX-Talk mailing list >>>>>> BaseX-Talk at mailman.uni-konstanz.de >>>>>> https://mailman.uni-konstanz.de/mailman/listinfo/basex-talk >>>>>> >>>>>> >>>>>> >>>> >>>> _______________________________________________ >>>> BaseX-Talk mailing list >>>> BaseX-Talk at mailman.uni-konstanz.de >>>> https://mailman.uni-konstanz.de/mailman/listinfo/basex-talk >>>> >>>> >> >> _______________________________________________ >> BaseX-Talk mailing list >> BaseX-Talk at mailman.uni-konstanz.de >> https://mailman.uni-konstanz.de/mailman/listinfo/basex-talk >> >